WdtPro Solar Lights Outdoor Motion Sensor User Manual

Introduction

Thank you for choosing the WdtPro Solar Lights Outdoor Motion Sensor. This manual provides essential information for the safe and efficient operation of your new solar light. Please read it thoroughly before installation and retain it for future reference.

Image: The WdtPro Solar Lights Outdoor Motion Sensor, featuring three adjustable light heads and a solar panel, mounted on an exterior wall, providing bright illumination to a deck area at night.

Product Features

• Ultra-Bright Illumination: Equipped with 150 advanced COB LED chips and 45° wide-angle Fresnel lenses, delivering 3500 lumens for 360° wraparound brightness.
• High-Efficiency Solar Panel: Features an upgraded glass panel made of aerospace-grade monocrystalline silicon with a 50% conversion rate, allowing for faster charging.
• Advanced PIR Motion Sensing: Detects human or pet movement up to 60ft within a 180-degree range, covering approximately 1800 sq ft.
• Multiple Lighting Modes: Offers three distinct operating modes for various security and lighting needs.
• Durable and Waterproof: Constructed with ABS+PC shell, IP65 waterproof rating, and condensation evacuation technology for extreme weather resilience.
• Adjustable Light Heads: Three independently adjustable light heads provide flexible illumination angles without dead spots.

Image: Detailed view of the light head, illustrating the 150 COB LED chips and Fresnel lenses designed for 3500 lumens and 360-degree illumination.

Image: Illustration of the upgraded glass solar panel's efficiency, demonstrating a 50% conversion rate, 3 hours of charging for 15 hours of working time, and over 800 motion sensing cycles.

Package Contents

Please verify that all components are present before beginning installation:

• Solar Motion Sensor Outdoor Light (1 unit)
• Wall Bracket (1 unit)
• Screws (2 units)
• Plastic Anchors (2 units)
• User Manual (1 unit)

Image: A visual representation of the package contents, including the solar light unit, wall bracket, screws, plastic anchors, and the user manual.

Setup and Installation

Follow these steps for optimal performance and safety:

1. Choose an Optimal Location: Select a location that receives direct sunlight for at least 6-8 hours daily to ensure the solar panel charges effectively. Avoid areas under eaves, trees, or other obstructions that might block sunlight or motion detection.
2. Mounting Height: For best motion detection, install the light at a height of approximately 6-10 feet (1.8-3 meters) from the ground.
3. Mark Drilling Points: Use the wall bracket as a template to mark the two drilling points on the desired mounting surface.
4. Drill Holes: Drill holes at the marked points. Insert the plastic anchors into the drilled holes.
5. Secure the Bracket: Align the wall bracket with the anchors and secure it using the provided screws.
6. Attach the Light: Slide the solar light unit onto the secured wall bracket until it clicks into place.
7. Adjust Light Heads and Solar Panel: Adjust the three light heads to cover the desired illumination area. The solar panel can also be angled to maximize sun exposure. The light heads are adjustable up to 135 degrees vertically and 90 degrees horizontally.

Image: A technical diagram illustrating the physical dimensions of the solar light and the range of motion for its adjustable light heads, allowing for no-dead-angle lighting.

Operating Instructions

The WdtPro Solar Light features a touch control method to cycle through its three lighting modes:

• Mode 1: Security Burst (Motion Sensor Mode)

  The light remains off until motion is detected. Upon detection, it illuminates at 100% brightness for 25 seconds, then turns off. This mode is designed for maximum security and energy saving.

• Mode 2: 12hr Night Guard (Low Light + Motion Sensor)

  The light stays on at a continuous 20% ambient brightness throughout the night. When motion is detected, it brightens to 100% for 25 seconds, then returns to 20% brightness. Ideal for continuous subtle illumination with enhanced security.

• Mode 3: Strong Light (Motion-Activated 100% Brightness)

  The light remains off during the day. At night, it activates to 100% brightness when motion is detected and stays on as long as motion is present, turning off after 25 seconds of no motion. This mode provides strong, on-demand lighting.

To switch between modes, locate the touch control button, usually on the underside or back of the main unit, and press it repeatedly until the desired mode is active.

Image: A visual guide to the three operational modes, detailing how the light behaves in response to motion and ambient light conditions for each setting.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your solar light:

• Clean the Solar Panel: Periodically wipe the solar panel with a soft, damp cloth to remove dust, dirt, leaves, or snow. A clean panel ensures maximum sunlight absorption and charging efficiency.
• Check for Obstructions: Ensure no new obstructions (e.g., growing branches, new structures) are blocking direct sunlight to the solar panel or interfering with the motion sensor's field of view.
• Inspect for Damage: Occasionally check the light unit, wiring, and mounting for any signs of wear, damage, or loose connections.
• Battery Care: While the battery is designed for long life, prolonged periods of low sunlight may reduce its charge. If possible, ensure the light receives adequate sunlight, especially after extended cloudy periods.

Troubleshooting

Specifications

Warranty and Support

WdtPro provides a limited warranty for this product. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact WdtPro customer support.

If you encounter any issues or have questions regarding your WdtPro Solar Lights Outdoor Motion Sensor, please contact our customer support team for assistance. You can typically find contact information on the product packaging or the official WdtPro website.

Manufacturer: WdtPro

Brand Store: Visit the WdtPro Store on Amazon