1. Introduction
Thank you for choosing the Basike 2025 Magnetic 3-in-1 Wireless Charger. This device is designed to provide convenient and efficient wireless charging for your iPhone, Apple Watch, and AirPods simultaneously. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your product.
2. Product Overview
2.1 What's in the Box
- 1 x Basike 3-in-1 Magnetic Wireless Charger
- 1 x Wireless Charging Cable
- 1 x User Manual
2.2 Key Features
- 3-in-1 Wireless Charging: Simultaneously charges compatible iPhone models (MagSafe compatible), Apple Watch, and AirPods.
- Magnetic Alignment: Strong magnets ensure precise and secure placement for efficient charging.
- Fast Charging: Supports up to 15W for iPhone, 2.5W for Apple Watch, and 5W for AirPods.
- Foldable Design: Compact and portable for easy storage and travel.
- Integrated Night Light: Features a soft night light for added convenience.
- Safety Protections: Built-in safeguards against over-current, over-voltage, and over-temperature.

Image 1: The Basike 3-in-1 Magnetic Wireless Charger demonstrating simultaneous charging capabilities for an iPhone (15W), Apple Watch (2.5W), and AirPods (3W).

Image 2: The magnetic support of the charger, highlighting its strong adhesion, firmness, and security for devices.
3. Setup Instructions
- Connect to Power: Connect the provided wireless charging cable to the charger and then to a compatible power adapter (not included). For optimal fast charging, use a 20W or higher Power Delivery (PD) charger, or a QC3.0 compatible adapter.
- Placement: Place the charger on a flat, stable surface.
- Unfold (if necessary): If the charger is in its folded state, gently unfold it to the desired charging position. The iPhone charging area can be adjusted up to 120 degrees.

Image 3: Illustration of how the 3-in-1 charger simplifies desk organization by replacing multiple cables with a single charging station.
4. Operating Instructions
4.1 Charging Your Devices
- For iPhone: Place your MagSafe-compatible iPhone (iPhone 12 series or newer) directly onto the magnetic charging pad. Ensure it aligns correctly for the magnetic connection. If using a case, it must be a MagSafe-compatible case or no case at all.
- For Apple Watch: Place your Apple Watch onto the dedicated Apple Watch charging module.
- For AirPods: Place your AirPods (with wireless charging case) onto the designated AirPods charging area.
Charging will begin automatically upon correct placement. The charging indicator (if present) will illuminate to confirm charging status.
4.2 Adjusting the iPhone Charging Area
The iPhone charging pad can be adjusted up to 120 degrees. Gently pivot the pad to your preferred angle for viewing content horizontally or vertically while charging.
4.3 Night Light Function
The charger includes a night light feature. Refer to the specific controls on your device (e.g., a touch-sensitive area) to turn the night light on/off or adjust its intensity.
5. Maintenance
- Cleaning: Disconnect the charger from power before cleaning. Use a soft, dry cloth to wipe the surface. Do not use abrasive cleaners, solvents, or immerse the device in water.
- Storage: When not in use, the charger can be folded into a compact form for easy storage. Store in a cool, dry place away from direct sunlight and extreme temperatures.

Image 4: The charger's lightweight alloy material and foldable design, illustrating its compact form for easy storage.
6. Troubleshooting
- Device not charging or charging slowly:
- Ensure the charger is connected to a power adapter of at least 20W PD or QC3.0. Lower wattage adapters may result in slow charging or no charging.
- Verify that your device is correctly aligned on the charging pad.
- Remove any non-MagSafe compatible cases from your iPhone.
- Check for any foreign objects between the device and the charging pad.
- Indicator light flashing or device overheating:
- This may indicate a foreign object detection or overheating. Remove all devices and disconnect the charger from power. Allow it to cool down before attempting to charge again.
- Ensure the charger is used in a well-ventilated area.
- Night light not working:
- Ensure the charger is powered on.
- Check the touch control area for activation.
7. Specifications
| Product Name | 3-in-1 Magnetic Wireless Charger |
| Model Number | WXC148-W91 |
| Dimensions | 96 x 65 x 30 mm |
| Weight | 180 Grams |
| Material | Acrylonitrile Butadiene Styrene Plastic (ABS + Plastic) |
| Input | DC 5V-3A / 9V-3A |
| Smartphone Output | 5W / 7.5W / 10W / 15W (Max) |
| Headphone Output | 5W (Max) |
| Smartwatch Output | 2.5W |
| Frequency | 110-205KHz |
| Effective Charging Distance | <5mm |

Image 5: The charger's ultra-lightweight design, weighing only 225 grams, emphasizing its portability.
8. Safety Information
To ensure safe operation and prevent damage to the device or injury to yourself, please observe the following safety precautions:
- Do not disassemble, modify, or repair the device yourself.
- Keep the charger away from water, moisture, and high temperatures.
- Avoid dropping or subjecting the charger to strong impacts.
- Do not place metal objects or magnetic cards on the charging pad, as this may interfere with charging or damage the device.
- Ensure proper ventilation during use to prevent overheating.
- This charger incorporates multiple safety protections including over-current protection, over-voltage protection, and short-circuit protection.

Image 6: Visual representation of the charger's three layers of protection, including safeguards against over-current, under-voltage, and short-circuit.
9. Warranty and Support
Basike products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your purchase or contact your retailer. If you encounter any issues or have questions regarding your Basike 3-in-1 Magnetic Wireless Charger, please contact Basike customer support through the official website or your purchase platform for assistance.