Introduction
This manual provides instructions for the ECONTROLLY MBE988-1 replacement remote control. This remote is designed to be compatible with TOUMEI C800, C800S, and C800A mini projectors. It requires no programming or pairing, offering a straightforward solution for controlling your projector.
Setup
1. Battery Installation
The remote control requires two AAA batteries (not included). Follow these steps to install the batteries:
- Locate the battery compartment cover on the back of the remote control.
- Press down on the tab and slide the cover downwards to open the compartment.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Image: Rear view of the remote control with the battery compartment open, illustrating where to insert two AAA batteries.
2. Initial Use
Once batteries are installed, the remote control is ready for immediate use with compatible TOUMEI C800, C800S, or C800A mini projectors. No additional programming or pairing steps are required.
Operating the Remote Control
The ECONTROLLY MBE988-1 remote control features standard buttons for navigating and controlling your TOUMEI mini projector. Refer to the image below for a visual guide to the buttons.
Image: Front view of the ECONTROLLY MBE988-1 remote control, displaying its layout and various function buttons.
Button Functions
- Power Button (Red): Turns the projector on or off.
- Directional Pad (Up, Down, Left, Right): Navigates through menus and selections.
- OK Button: Confirms selections or enters menus.
- Back/Return Button: Returns to the previous screen or menu.
- Home Button: Accesses the projector's main home screen.
- Volume Up/Down: Adjusts the audio volume.
- Mute Button: Mutes or unmutes the audio.
- Menu/Settings Button: Opens the projector's settings or options menu.
- Other buttons may vary in function depending on the specific TOUMEI projector model and its firmware.
Maintenance
To ensure the longevity and proper functioning of your remote control, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or abrasive materials.
- Battery Replacement: Replace batteries when the remote's responsiveness decreases or it stops functioning. Always replace both batteries at the same time with new ones of the same type.
- Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage. Store in a cool, dry place.
- Avoid Damage: Do not drop the remote control, expose it to extreme temperatures, or immerse it in water.
Troubleshooting
If you encounter issues with your remote control, try the following troubleshooting steps:
- Remote Not Responding: Check if the batteries are inserted correctly with the correct polarity. Replace old batteries with new ones.
- Weak Signal: Ensure there are no obstructions between the remote control and the projector's infrared receiver. Make sure you are within the effective range of the projector's IR sensor.
- Specific Button Not Working: Clean the remote control, especially around the problematic button, to remove any dirt or debris that might be interfering with its operation.
- Projector Compatibility: Verify that your projector model is indeed a TOUMEI C800, C800S, or C800A. This remote is specifically designed for these models.
Specifications
| Model Number | MBE988-1 |
| Compatible Projectors | TOUMEI C800, C800S, C800A Mini Projectors |
| Dimensions | 5 x 1 x 0.5 inches (approximately) |
| Item Weight | 1 ounce (approximately, without batteries) |
| Color | Black |
| Power Source | 2 x AAA Batteries (not included) |
| Special Feature | No Programming Required |
Warranty and Support
Warranty Information
Please refer to the retailer or manufacturer's website for specific warranty details regarding your ECONTROLLY MBE988-1 replacement remote control. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.
Customer Support
If you require further assistance or have questions not covered in this manual, please contact the seller or ECONTROLLY customer support. You can often find contact information on the product packaging or the retailer's website where the item was purchased.
