Introduction
Thank you for choosing the Setpower RF25 12V Portable Refrigerator. This manual provides essential information for the safe and efficient operation of your new portable refrigerator. Please read it thoroughly before use and retain it for future reference.
The Setpower RF25 is designed for versatile cooling and freezing, ideal for car, truck, RV, SUV, camping, and travel. It features advanced cooling technology, energy-efficient modes, and a durable design to keep your food and beverages fresh on the go.
Safety Information
To ensure safe operation and prevent damage, please observe the following safety precautions:
- Do not operate the refrigerator if the power cord is damaged.
- Ensure proper ventilation around the unit. Do not block air vents.
- Keep the refrigerator away from heat sources and direct sunlight.
- Do not immerse the unit in water or expose it to heavy rain.
- Always disconnect power before cleaning or performing maintenance.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Setup
Unpacking and Contents
Carefully remove the refrigerator from its packaging. Verify that all components are present:
- 1 x Setpower RF25 Car Refrigerator
- 1 x Slide (pre-installed or separate, depending on model)
- 1 x 12/24V DC Power Cable
- 1 x 100-240V AC Adapter
- 1 x Built-in Ice Pack
- 1 x User Manual
Initial Placement and Power Connection
Place the refrigerator on a stable, level surface. Ensure adequate clearance for ventilation around the unit. Connect the appropriate power cable (DC for vehicle, AC for home) to the refrigerator's power input and then to the power source.
Figure 1: Setpower RF25 Portable Refrigerator with its interior visible.
Figure 2: Powering options for the Setpower RF25, including solar, AC, and DC.
Using the Built-in Ice Pack
The RF25 includes an exclusive ice pack that can be filled with water and frozen. This ice pack helps maintain cooling for up to 50 hours during power outages and can also serve as a divider within the refrigerator compartment.
Video: Demonstration on how to use the ice pack, including filling it with water and placing it inside the refrigerator. This video also shows how the ice pack can act as a divider for organizing contents.
Figure 3: The removable ice pack can be used as a divider or removed to maximize space.
Operating Instructions
Control Panel and Modes
The RF25 features an intuitive control panel for easy temperature and mode adjustments. It offers two operating modes: ECO and MAX.
- ECO Mode: Energy-saving mode, consuming approximately 28W. Ideal for maintaining temperature over longer periods.
- MAX Mode: Fast cooling mode, consuming approximately 40W. Use for rapid temperature drops.
The refrigerator can cool from 68°F to 32°F in 15 minutes and to -4°F in 45 minutes (based on 77°F ambient temperature and empty box conditions).
Figure 4: ECO and MAX power modes for efficient and rapid cooling.
Figure 5: Rapid cooling performance of the Setpower RF25.
Smartphone App Control
Control your RF25 remotely using the dedicated smartphone app. The app allows you to easily switch between modes and adjust temperature settings, offering convenience and flexibility.
Figure 6: The RF25 can operate as both a freezer and a refrigerator, controlled via app.
Battery Protection Modes
The refrigerator is equipped with 3-level battery protection to prevent excessive discharge of your vehicle's battery when using 12V/24V DC power. You can select High, Medium, or Low mode based on your battery type and usage needs. The factory default setting is High mode.
| Voltage | Mode | Cut Out (V) | Cut In (V) |
|---|---|---|---|
| 12V DC | High | 11.1 | 12.4 |
| Medium | 10.4 | 11.7 | |
| Low | 9.6 | 10.9 | |
| 24V DC | High | 24.3 | 25.7 |
| Medium | 22.8 | 24.2 | |
| Low | 21.3 | 22.7 |
Note: If the input voltage is lower than the 'Cut Out' voltage for the selected mode, the refrigerator will automatically turn off to protect the battery. For example, in High mode, the input voltage must be higher than 12.5V to turn on the refrigerator.
Figure 7: Understanding the 3-level battery protection for your vehicle's battery.
2-Way Door and Anti-Shake Design
The RF25 features a reversible 2-way door, allowing it to be opened from either side for convenience. Its robust anti-shake design ensures stable operation even during off-road travel, capable of handling up to 40° tilt.
Figure 8: The versatile 2-way door design.
Figure 9: The anti-shake design ensures stability during travel.
Maintenance
Cleaning
Regular cleaning helps maintain the efficiency and longevity of your refrigerator.
- Interior: Clean the interior with a damp cloth and mild detergent. Rinse with clean water and dry thoroughly. Do not use abrasive cleaners or harsh chemicals.
- Exterior: Wipe the exterior with a soft, damp cloth.
- Vents: Periodically check and clean the air vents to ensure unobstructed airflow. Use a soft brush or vacuum cleaner to remove dust.
Storage
When storing the refrigerator for an extended period:
- Ensure the unit is clean and dry.
- Leave the lid slightly ajar to prevent odors and mold growth.
- Store in a dry, well-ventilated area, away from direct sunlight and extreme temperatures.
Troubleshooting
If you encounter issues with your Setpower RF25, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Refrigerator not turning on | No power supply; Low battery voltage (E1 error); Damaged power cable. | Check power connection; Adjust battery protection mode or charge battery; Inspect and replace cable if damaged. |
| Insufficient cooling | Vents blocked; Ambient temperature too high; Door not sealed properly; ECO mode selected. | Clear vents; Move to cooler area; Ensure lid is closed tightly; Switch to MAX mode. |
| Unusual noise | Unit not level; Fan obstruction. | Place on a level surface; Check for obstructions around the fan. |
| E1 Error Code | Low input voltage from battery. | This indicates the battery protection system has activated. Charge your battery or switch to a lower battery protection mode (e.g., from High to Medium or Low) if safe for your battery. |
If the problem persists after attempting these solutions, please contact Setpower customer support for assistance.
Specifications
Key technical specifications for the Setpower RF25 Portable Refrigerator:
| Feature | Detail |
|---|---|
| Brand | Setpower |
| Model Info | RF25+Slide |
| Item Weight | 23.4 pounds |
| Product Dimensions | 24.3 x 14.3 x 11.9 inches |
| Capacity | 25 Liters |
| Annual Energy Consumption | 184 Kilowatt Hours |
| Installation Type | Freestanding |
| Color | Black |
| Voltage | 12 Volts |
| Defrost System | Automatic |
| Number Of Doors | 1 |
| Special Feature | Portable |
Figure 10: Dimensions and capacity of the Setpower RF25.
Warranty and Support
Setpower provides comprehensive support for your RF25 portable refrigerator:
- Compressor Warranty: 3 years of technical support on the compressor.
- Parts Maintenance: 1 year maintenance on all other parts.
For technical assistance, warranty claims, or any inquiries, please refer to the contact information provided on the Setpower official website or your purchase documentation. Please have your model number (RF25+Slide) and purchase date ready when contacting support.
