My Labeka W03B water fountain has a flashing yellow light in the upper right side. It is tear-drop shaped. The water won't flow. I've changed the filters and it is fully charged. I've taken the bottom of the motor unit off and cleaned it, but it still won't work. How do I fix this?

Based on the design of the LABEKA W03B, a flashing yellow light (often tear-drop shaped) typically serves as a Filter Replacement Reminder or a Maintenance Alert. Even if you have already replaced the filter, the fountain may require a manual reset to clear the light and resume normal operation.Try the following steps to resolve the issue:Reset the Filter Timer: Look for a main button on the fountain (often the power button or a dedicated 'Reset' button). Press and hold this button for 3 to 5 seconds. This usually clears the yellow flashing light and should allow the pump to restart.Check the Water Level: Ensure the water is filled between the minimum and maximum lines. If the sensor detects low water, it may stop the pump and flash an indicator light to prevent motor damage.Verify Pump Alignment: Since you have cleaned the motor unit, ensure the pump is properly seated and aligned with the internal water pipe. If the pump is not perfectly aligned with the outlet, water will not flow even if the motor is running.Check for Air Bubbles: Sometimes air can get trapped in the pump after cleaning. Submerge the pump fully in the water and gently shake it or turn it on and off a few times to release any trapped air.If the light continues to flash and the pump does not engage after a reset, there may be a hardware fault. LABEKA offers 12 months of free maintenance and 24/7 customer support via their official Amazon store for warranty claims.

LABEKA W03B Cat Water Fountain Filter Instruction Manual

1. Product Overview

This manual provides instructions for the LABEKA W03B Cat Water Fountain Replacement Filters. These filters are designed to ensure your pet receives clean, fresh water from your LABEKA 102oz/3L Pet Water Fountain.

LABEKA W03B Cat Water Fountain Filters and a pet fountain

Image 1.1: An 8-pack of LABEKA W03B cat water fountain filters shown alongside a compatible pet water fountain.

Filter Composition and Function

The LABEKA W03B filters utilize a multi-stage filtration system to purify water. Each filter is encased in durable high-density fabric and contains:

Foam Filter: Traps larger particles like hair and debris.
Activated Carbon Adsorption Sponge: Further removes impurities and odors.
Coconut Activated Carbon: Provides enhanced absorption of chlorine and other contaminants.
Medical Stone: Helps to balance pH levels and enrich water with beneficial minerals.
Silver Ion Ceramic Antibacterial Balls: Inhibits bacterial growth in the water.
Additional Foam Filter: Provides a final layer of filtration.

Diagram illustrating the layers of filtration within the LABEKA W03B filter

Image 1.2: A visual breakdown of the six filtration layers within the LABEKA W03B replacement filter.

2. Setup and Installation

Follow these steps to properly prepare and install your new LABEKA W03B filter:

Soak the Filter: Place the new filter in a clean bowl of water and soak it for 5 minutes. This helps to remove any loose carbon dust and prepares the filter for optimal performance.
Rinse the Filter: After soaking, rinse the filter thoroughly under running tap water for 30 seconds.

Two images showing the process of soaking and rinsing a cat water fountain filter

Image 2.1: Step-by-step visual guide for soaking the filter in water for 5 minutes and then rinsing it under a faucet for 30 seconds.

Access Filter Cartridge: Open the lid of the filter cartridge compartment on your LABEKA pet water fountain.
Insert Filter: Place the prepared filter into the designated slot within the filter cartridge. Ensure it sits securely.
Close Cartridge: Close the lid of the filter cartridge compartment.

Diagram showing how to open the filter compartment and insert the filter into the LABEKA pet fountain

Image 2.2: Visual instructions for opening the filter compartment, inserting the filter, and closing the lid.

Add Water: Fill the water tank with fresh water, ensuring the level is between the minimum and maximum fill lines.
Reassemble Fountain: Place the top cover back onto the water tank, ensuring all components are properly aligned.
Connect Power: Plug the power adapter into a suitable electrical outlet to start the fountain.

Diagram showing how to add water, reassemble the fountain, and connect power

Image 2.3: Visual instructions for adding water to the fountain, placing the top cover, and connecting the power adapter.

3. Operating Instructions

Once the filter is installed and the fountain is assembled and powered on, the fountain will begin circulating and filtering water for your pet. Ensure the water level is always maintained above the minimum line to prevent pump damage.

A cat standing next to a LABEKA pet water fountain, indicating healthy hydration

Image 3.1: A cat observing the LABEKA pet water fountain, illustrating the product in use.

4. Maintenance

Regular maintenance of your LABEKA W03B filters and fountain is crucial for providing your pet with consistently clean water and extending the life of the product.

Filter Replacement

Replace filters every 2 to 4 weeks under normal usage conditions.
For households with multiple pets, or if the water appears cloudy or has an odor, replace the filter more frequently.

Image 4.1: A visual reminder to replace the filter every 1-2 weeks for optimal performance, with actual frequency depending on usage.

Fountain and Pump Cleaning

To prolong the life of the water pump and maintain hygiene, clean the entire fountain and pump every 1 to 2 weeks.
Refer to your LABEKA W03B Pet Water Fountain manual for detailed cleaning instructions for the fountain and pump components.

5. Troubleshooting

No specific troubleshooting information for the filters is provided. If you encounter issues with water flow or quality after replacing the filter, please ensure:

The filter was properly soaked and rinsed before installation.
The filter is correctly seated in its compartment.
The water pump and fountain components are clean and free of debris.
The water level in the fountain is adequate.

For issues related to the fountain's operation (e.g., pump noise, no water flow), please consult the instruction manual for your LABEKA W03B Pet Water Fountain or contact customer service.

6. Specifications

Feature	Detail
Product Name	LABEKA Cat Water Fountain Filters
Model Compatibility	LABEKA W03B 102oz/3L Pet Water Fountain
Quantity per Pack	8 Filters
Filter Dimensions	Length: 5.75 inches, Width: 1.65 inches
Filtration Stages	Multi-stage (Foam, Activated Carbon Sponge, Coconut Activated Carbon, Medical Stone, Silver Ion Ceramic Antibacterial Balls)
Recommended Replacement	Every 2-4 weeks (or more frequently for multiple pets)
Manufacturer	LABEKA

Image showing the dimensions of a single LABEKA W03B filter

Image 6.1: Detailed dimensions of a single LABEKA W03B replacement filter.

7. Support and Warranty

LABEKA is committed to providing high-quality products and customer satisfaction.

Customer Service

For any questions, concerns, or assistance, LABEKA offers 24/7 customer support. Please refer to the contact information provided with your LABEKA W03B Pet Water Fountain or visit the official LABEKA store on Amazon.

Warranty Information

12-Months Free Maintenance: LABEKA provides 12 months of free maintenance for eligible products.
7 Days Return Policy: A 7-day return policy is available for products purchased.

Please retain your proof of purchase for warranty claims and returns.

LABEKA W03B