FREQUENT BUBBLES Rechargeable Bubble Machine Model 8011 User Manual

Introduction

Thank you for choosing the FREQUENT BUBBLES Rechargeable Bubble Machine. This manual provides essential information for the safe and effective use of your new bubble machine. Please read it thoroughly before operation and retain it for future reference.

Safety Information

WARNING: This product is NOT SUITABLE FOR CHILDREN UNDER 3 YEARS due to small parts which may present a choking hazard.

• Always supervise children during use.
• Keep bubble solution away from eyes and mouth. In case of contact, rinse thoroughly with water.
• Do not ingest bubble solution.
• Ensure the charging port is dry before connecting the USB cable.
• Do not immerse the bubble machine in water.
• Use only the provided USB cable for charging.
• Avoid low battery levels to prevent potential leakage.

What's in the Box

Verify that all items are present in the package:

• 1 x Bubble Machine
• 2 x 120ml Bubble Solution Concentrates
• 1 x USB Charging Cable

Setup

1. Initial Charging:

   Before first use, fully charge the bubble machine for 2 hours. Connect the provided USB cable to the charging port on the device and to a suitable USB power source. The red indicator light will be ON during charging and turn OFF when fully charged (approximately 2 hours).

   

   Image: The bubble machine being charged via USB cable. A red light indicates charging is in progress.

2. Prepare Bubble Solution:

   Pour one bottle of 120ml bubble concentrate into the cloud-shaped base. Then, fill the base with water, maintaining a 1:4 ratio of concentrate to water. Avoid overly diluted solution to prevent leakage and ensure optimal bubble production.

   

   Image: Steps for mixing bubble concentrate with water in the machine's base.

Operation

1. Power On:

   Ensure the bubble machine is placed on a stable, level surface. Press the power button once to activate the Colorful Light Mode. Wait approximately 1 second for the bubble mechanism to prepare.

2. Bubble Mode:

   Press the power button a second time to activate both the lights and bubble production. The machine will begin to generate thousands of bubbles.

   

   Image: Diagram showing the two operational modes of the bubble machine.

3. Optimal Bubble Direction:

   For best results, operate the bubble machine in the direction of the wind. Blowing against the wind may cause bubbles to stick to the machine, which is normal. Simply wipe any residue dry with a cloth.

4. Power Off:

   Press the power button a third time to turn off the machine.

Maintenance

1. Cleaning After Use:

   After each use, draw clean water into the straw (tube) and expel it by running the machine for approximately 120 seconds. This helps rinse out residual bubble solution and prevents clogging.
2. Storage:

   Empty any remaining bubble solution from the reservoir. Wipe the machine clean with a dry cloth. Store in a cool, dry place away from direct sunlight.

Troubleshooting

• No Bubbles or Few Bubbles:
  • Ensure the battery is fully charged.
  • Check if the bubble solution is mixed correctly (1:4 concentrate to water ratio). Overly diluted or too concentrated solution can affect bubble production.
  • Verify that the straw (tube) is properly submerged in the solution.
  • Perform the cleaning procedure (running with clean water) to clear any clogs.
• Machine Not Turning On:
  • Confirm the battery is fully charged.
  • Ensure the power button is pressed firmly.
• Solution Leakage:
  • Ensure the machine is kept upright during operation and storage.
  • Check that the bubble solution is not overly diluted.
  • Avoid operating the machine with a very low battery, as this can sometimes lead to leakage.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact FREQUENT BUBBLES customer service directly. Contact details are typically available on the manufacturer's official website or through your point of purchase.