HoneyGuaridan Automatic Cat Feeder A23D User Manual

1. Introduction

Thank you for choosing the HoneyGuaridan Automatic Cat Feeder A23D. This device is designed to provide scheduled and portion-controlled meals for up to two cats, ensuring a consistent feeding routine. It features a 3.5-liter capacity, a two-way food splitter, and dual power supply options for reliable operation.

This manual provides detailed instructions for the proper setup, operation, and maintenance of your automatic feeder. Please read it thoroughly before use and retain it for future reference.

Image 1.1: Front view of the HoneyGuaridan Automatic Cat Feeder A23D, showing the food reservoir, control panel, and two stainless steel feeding bowls.

2. Safety Information

• Read all instructions before operating the feeder.
• Keep the feeder away from children and pets when not in use or during assembly.
• Use only dry pet food with a kibble size less than 0.5 inches (1.27 cm) in diameter.
• Do not immerse the main unit in water or any other liquid.
• Ensure the power adapter is securely connected and placed in a dry area.
• If using batteries, ensure they are inserted correctly and replace them when low to prevent power interruption.
• Do not attempt to disassemble or repair the unit yourself. Contact customer support for assistance.

3. Package Contents

Please check the package to ensure all items are present:

• Automatic Pet Feeder Main Unit
• Food Storage Container (3.5L)
• Lid with Desiccant Compartment
• Two Stainless Steel Bowls
• Two-Way Food Splitter
• Power Adapter (USB-C cable and wall adapter)
• User Manual

4. Product Components

Image 4.1: Overview of the feeder's key features, including voice recording, dual power options, timed feeding, and multiple meal settings.

Image 4.2: Illustration of the double food dispense chute, designed to ensure equal portions are delivered to each of the two feeding bowls.

Image 4.3: Detailed view of the food reservoir's sealing components, highlighting the silicone ring, locking lid, desiccant, and sealed outlet for food freshness.

5. Setup

5.1 Assembly

1. Place the main feeder unit on a flat, stable surface.
2. Insert the two-way food splitter into the food outlet at the bottom of the main unit. Ensure it is securely seated.
3. Place the two stainless steel bowls onto the designated slots on either side of the main unit, aligning them with the splitter outlets.
4. Insert the food storage container onto the main unit.
5. Open the lid and place the moisture-proof desiccant packet into its designated compartment on the underside of the lid. Close the lid securely.

5.2 Power Supply

Image 5.1: Illustration demonstrating the dual power supply capability, showing the battery compartment for three D-size batteries and the connection point for the Type-C power adapter.

The feeder supports dual power supply for uninterrupted operation:

• AC Power: Connect the USB-C cable to the feeder and the power adapter to a standard wall outlet. This is the primary power source.
• Battery Backup: For power outages, install 3 D-size batteries (not included) into the battery compartment at the bottom of the unit. The feeder will automatically switch to battery power if AC power is lost. Settings will be retained during power transitions.

5.3 Filling the Food Reservoir

1. Open the top lid of the feeder.
2. Pour dry pet food into the 3.5-liter storage container. Ensure the kibble size is suitable (less than 0.5 inches in diameter).
3. Close the lid securely to maintain food freshness and prevent pets from accessing the food.

6. Operating Instructions

Image 6.1: Detailed view of the user-friendly control panel, displaying the current time and programmable meal slots, with various function buttons.

6.1 Control Panel Overview

The control panel features an LCD screen and several buttons:

• MEAL Button: Used to select meal numbers (1-6).
• PORTION Button: Adjusts the portion size for each meal.
• TIME Button: Sets the current time and meal times.
• LOCK Button: Locks/unlocks the control panel to prevent accidental changes.
• RECORD Button: Records and plays back a voice message.
• MANUAL FEED Button: Dispenses food manually.
• UP/DOWN Arrows: Navigate and adjust values.

6.2 Setting Current Time

1. Press and hold the TIME button until the hour display flashes.
2. Use the UP/DOWN arrows to set the current hour.
3. Press the TIME button again to move to minutes, then use UP/DOWN arrows to set minutes.
4. Press the TIME button to confirm.

6.3 Programming Feeding Schedule

The feeder allows up to 6 meals per day, with adjustable portion sizes for each.

Image 6.2: A visual representation of setting a customized feeding schedule, showing different meal times and corresponding portion sizes.

1. Press the MEAL button to select the desired meal number (e.g., Meal 1). The meal number will flash.
2. Press the TIME button. The hour for that meal will flash. Use UP/DOWN arrows to set the feeding hour.
3. Press the TIME button again to set the minutes for the meal.
4. Press the PORTION button. The portion size will flash. Use UP/DOWN arrows to set the number of portions (1-9). One portion is approximately 15ml or 6g.
5. Repeat steps 1-4 for each desired meal (up to 6 meals).
6. To disable a meal, set its portion size to 0.

6.4 Manual Feeding

Press the MANUAL FEED button once to dispense one portion of food immediately. This will not affect the programmed feeding schedule.

6.5 Voice Recording

Image 6.3: The voice recording feature allows you to record a personalized message that plays at each mealtime, calling your pets to eat.

1. Press and hold the RECORD button. The microphone icon will appear on the screen.
2. Speak your message (up to 10 seconds) into the microphone located on the feeder.
3. Release the RECORD button to save the message.
4. The recorded message will play automatically at each scheduled mealtime.

7. Maintenance

7.1 Cleaning

Regular cleaning ensures hygiene and proper functioning of the feeder.

• Disassembly: Unplug the feeder and remove the food storage container, lid, food splitter, and stainless steel bowls.
• Washable Parts: The food storage container, lid, food splitter, and stainless steel bowls can be washed with mild soap and water. Rinse thoroughly and dry completely before reassembly.
• Main Unit: Wipe the main unit with a soft, damp cloth. Do not immerse the main unit in water.
• Reassembly: Ensure all parts are completely dry before reassembling the feeder.

7.2 Desiccant Replacement

The moisture-proof desiccant helps keep the food fresh. It is recommended to replace the desiccant packet every 1-2 months, or as needed, depending on humidity levels.

8. Troubleshooting

9. Specifications

• Model: A23D
• Capacity: 3.5 Liters
• Material: Food-grade ABS plastic, Stainless Steel bowls
• Dimensions (LxWxH): 7 x 7 x 8 inches (17.78 x 17.78 x 20.32 cm)
• Item Weight: 2.72 pounds (1.23 kg)
• Power Supply: DC 5V/1A adapter (USB-C) and 3 x D-size batteries (not included)
• Number of Meals: Up to 6 meals per day
• Portion Size: 1-9 portions per meal (approx. 15ml/6g per portion)
• Voice Recording: Up to 10 seconds
• Compatible Food: Dry kibble, diameter less than 0.5 inches (1.27 cm)

10. Warranty and Support

HoneyGuaridan products are designed for quality and reliability. For warranty information, technical support, or any questions regarding your automatic feeder, please refer to the contact information provided on the product packaging or visit the official HoneyGuaridan website. Please have your model number (A23D) and purchase details ready when contacting support.