1. Introduction
Thank you for choosing the Skil PWR CORE 20 Brushless 20V 1/2-Inch Compact Drill Driver Kit. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and keep it for future reference.
2. Safety Information
Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury when operating power tools.
General Safety Rules:
- Wear eye protection. Always wear safety goggles or safety glasses with side shields.
- Dress properly. Do not wear loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.
- Secure workpiece. Use clamps or a vise to hold the workpiece.
- Maintain a firm grip. Hold the tool firmly with both hands to maintain control.
- Avoid accidental starting. Ensure the switch is in the OFF position before inserting the battery pack.
- Do not force the tool. It will perform better and more safely at the rate for which it was designed.
- Keep work area clean and well lit. Cluttered or dark areas invite accidents.
- Store idle tools. When not in use, tools should be stored in a dry, high, or locked-up place, out of reach of children.
Battery and Charger Safety:
- Use only the specified charger for the battery pack.
- Do not charge battery packs in damp or wet locations.
- Do not incinerate the battery pack, even if it is severely damaged or completely worn out.
- Do not short-circuit the battery pack.
3. Package Contents
Verify that all items listed below are included in your package. If any parts are missing or damaged, please contact customer service.
- Skil PWR CORE 20 Brushless 20V 1/2-Inch Compact Drill Driver
- PWR CORE 20 2.0Ah Lithium-Ion Battery
- PWR JUMP Charger
- Belt Clip
- Screwdriving Bit
- Battery Jacket
Image: The Skil PWR CORE 20 Brushless 20V 1/2-Inch Compact Drill Driver, its 2.0Ah battery, and the PWR Jump charger.
4. Product Features
The Skil PWR CORE 20 Drill Driver is designed for versatility and performance.
- Digital Brushless Motor: Provides compact, lightweight power with up to 450 inch-pounds of torque.
- 1/2-Inch Single-Sleeve Keyless Ratcheting Chuck: Allows for quick and easy bit changes.
- LED Worklight: Illuminates the workspace for up to 10 minutes, featuring pre-light and after-glow functions.
- 17-Stage Torque Adjustment: Offers 17 settings for various driving applications, plus a dedicated drill mode.
- PWR CORE 20 Lithium Battery Technology: Designed for longer runtime and extended battery life.
- PWR ASSIST Mobile Charging: The battery features a USB port for charging mobile devices.
- PWR JUMP Charger: Provides rapid charging, reaching 25% charge in approximately 5 minutes.
Image: The Skil PWR CORE 20 Drill Driver, emphasizing its compact design and power.
Image: A user operating the drill driver, illustrating its torque capabilities while drilling into wood.
Image: A close-up view of the drill's 1/2-inch single-sleeve keyless ratcheting chuck, with a drill bit inserted.
Image: A detailed view of the integrated LED worklight on the drill driver, showing its illumination.
Image: A close-up of the torque adjustment ring, indicating the 17 available settings and drill mode.
Image: A user operating the drill driver, representing its extended runtime capabilities.
Image: The PWR CORE 20 battery with a mobile phone connected to its USB port for charging, demonstrating the PWR ASSIST feature.
Image: The PWR CORE 20 battery inserted into the PWR Jump charger, indicating its rapid charging capability.
5. Setup
Charging the Battery:
- Connect the PWR JUMP Charger to a standard electrical outlet.
- Slide the PWR CORE 20 Battery Pack onto the charger until it clicks into place.
- The charger indicator lights will show the charging status. A full charge is indicated when the light turns solid green.
- Once fully charged, remove the battery pack from the charger.
Installing/Removing the Battery Pack:
- To Install: Align the battery pack with the base of the drill driver and slide it in until it locks securely.
- To Remove: Press the battery release button (located on the battery pack) and slide the battery pack out.
Installing/Removing Drill Bits:
- Ensure the drill driver is switched OFF and the battery pack is removed.
- Grasp the rear portion of the chuck with one hand and rotate the front portion counter-clockwise to open the chuck jaws.
- Insert the desired drill bit or screwdriver bit into the chuck. Ensure the bit is centered.
- Rotate the front portion of the chuck clockwise to tighten the jaws securely around the bit. The ratcheting mechanism will click when tightened.
- To Remove: Reverse the tightening process by rotating the front portion counter-clockwise.
6. Operating Instructions
Selecting Torque and Mode:
The torque adjustment ring allows you to select the appropriate torque setting for your application or choose the drill mode.
- Torque Settings (1-17): Rotate the ring to a lower number for driving small screws into soft materials, and to a higher number for driving larger screws into harder materials. The clutch will disengage at the selected torque to prevent over-driving or stripping.
- Drill Mode (Drill Icon): Select this mode for drilling holes. In drill mode, the clutch does not engage, providing maximum torque.
Variable Speed Trigger:
The trigger switch controls the speed of the drill. Pressing the trigger further increases the speed. This allows for precise control over drilling and driving applications.
Forward/Reverse Selector:
The forward/reverse selector switch is located above the trigger. Push it to the left for forward rotation (drilling/driving) and to the right for reverse rotation (removing screws/bits). Center the switch to lock the trigger and prevent accidental starting.
LED Worklight:
The integrated LED worklight automatically illuminates when the trigger is pressed, providing visibility in dimly lit areas. It features a pre-light and after-glow function, staying on for a short period after the trigger is released.
7. Maintenance
Regular maintenance ensures optimal performance and extends the life of your tool.
Cleaning:
- Always remove the battery pack before cleaning.
- Use a clean, dry cloth to wipe down the tool. Do not use harsh chemicals or abrasive cleaners.
- Keep the ventilation openings clear of dust and debris to prevent overheating.
Storage:
- Store the drill driver, battery, and charger in a cool, dry place, away from direct sunlight and moisture.
- Ensure the battery is partially charged (not fully depleted or fully charged) before long-term storage.
8. Troubleshooting
Refer to the table below for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not start | Battery not charged Battery not properly installed Forward/Reverse selector in center (locked) position | Charge battery Reinstall battery securely Move selector to forward or reverse position |
| Loss of power during operation | Battery charge low | Recharge battery |
| Bit slips in chuck | Chuck not tightened sufficiently Bit shank is dirty or damaged | Tighten chuck firmly Clean or replace bit |
| Overheating | Blocked ventilation slots Excessive load | Clear ventilation slots Reduce pressure or use a sharper bit |
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | DL6293B-10 |
| Voltage | 20 Volts |
| Chuck Size | 1/2 inch |
| Chuck Type | Keyless Ratcheting |
| Motor Type | Brushless |
| Maximum Torque | 450 Inch Pounds |
| Maximum Rotational Speed | 1800 RPM |
| Battery Capacity | 2.0 Ah |
| Battery Type | Lithium-Ion |
| Item Weight | 5.59 pounds |
| Product Dimensions | 14.76"L x 3.35"W x 8.27"H |
10. Warranty and Support
Warranty Information:
This Skil PWR CORE 20 Brushless 20V 1/2-Inch Compact Drill Driver Kit comes with a 5-Year Limited Warranty upon registration. Please refer to the warranty card included with your product or visit the official Skil website for detailed terms and conditions.
Customer Support:
For technical assistance, replacement parts, or warranty claims, please contact Skil customer support. Contact information can typically be found on the Skil website or on the product packaging.
