Blossom MCL11

Download PDF
Contents

Blossom LED Mirror Medicine Cabinet User Manual

Model: MCL11 | Size: 36" x 32"

1. Introduction

Thank you for choosing the Blossom LED Mirror Medicine Cabinet. This manual provides essential information for the safe installation, operation, and maintenance of your new cabinet. Please read this manual thoroughly before installation and keep it for future reference.

Key Features:

  • Advanced LED Lighting with Adjustable Brightness (CRI 90+)
  • Built-in Defogger with Automatic Shut-off (45-60 minutes)
  • Copper-Free Silver Mirror Construction
  • Scratch-Resistant Anodized Aluminum Frame
  • 3 Adjustable Tempered Glass Shelves
  • Full-Mirrored Interior and Exterior
  • Soft-Close Hinges for Quiet Operation
  • Flexible Installation: Recessed or Surface Mounting
  • Smart Memory Function for Lighting Settings

2. Safety Information

Please observe the following safety precautions to prevent injury or damage to the product:

  • Electrical Safety: All electrical work must be performed by a qualified electrician in accordance with local codes and regulations. Ensure power is disconnected at the circuit breaker before installation or maintenance.
  • Handling: The mirror cabinet is heavy and fragile. Handle with care and ensure adequate support during installation. Two people are recommended for lifting and positioning.
  • Environment: Do not install in areas with excessive humidity or direct water spray. This product is designed for bathroom use but is not submersible.
  • Cleaning: Use only mild, non-abrasive cleaners. Avoid harsh chemicals that may damage the mirror or frame finish.
  • Ventilation: Ensure proper ventilation in the bathroom to prevent excessive moisture buildup.

3. Package Contents

Verify that all components are present and undamaged before beginning installation:

  • 1 x LED Medicine Cabinet (36" x 32")
  • 2 x Mirrored Doors
  • 3 x Adjustable Tempered Glass Shelves
  • Installation Hardware (screws, anchors, etc.)
  • User Manual

Note: Electrical outlet and wall plug are not included and must be provided by the installer.

4. Setup and Installation

The Blossom LED Medicine Cabinet supports both recessed and surface mounting. Professional installation is recommended.

4.1. Choosing Installation Type:

Image showing both surface mounting and recessed mounting options for the medicine cabinet.

Figure 4.1: Surface vs. Recessed Mounting Options

Decide whether to recess the cabinet into the wall or mount it directly onto the wall surface. Recessed installation requires cutting an opening in the wall.

4.2. Pre-Installation Steps:

  1. Disconnect Power: Turn off the main power supply to the bathroom at the circuit breaker.
  2. Measure and Mark: Carefully measure and mark the desired location for the cabinet on the wall, ensuring it is level and at an appropriate height. For recessed mounting, mark the precise cutout dimensions.
  3. Prepare Wiring: Ensure electrical wiring is accessible at the installation point. The cabinet requires a direct hardwired connection.

4.3. Mounting the Cabinet:

  1. Secure Mounting Brackets: Attach any necessary mounting brackets to the wall studs or use appropriate wall anchors if studs are not available.
  2. Electrical Connection: Connect the cabinet's electrical wires to the household wiring. Ensure all connections are secure and insulated according to electrical codes.
  3. Position Cabinet: Carefully lift the cabinet and secure it to the mounting brackets or into the recessed opening. Ensure it is level and flush with the wall.
  4. Install Shelves: Insert the adjustable tempered glass shelves into the desired positions inside the cabinet.
Interior view of the medicine cabinet with LED lighting and glass shelves.

Figure 4.2: Inside LED Light and Adjustable Shelves

Close-up showing 8mm thick adjustable shelves, door concealed finger-pull, and soft close hinges.

Figure 4.3: Shelf and Hinge Details

5. Operating Instructions

Your Blossom LED Mirror Medicine Cabinet features intuitive touch controls for lighting and defogging.

Image showing the two soft touch keys on the mirror for defogger and power on/off.

Figure 5.1: Touch Control Keys

5.1. LED Lighting Control:

  • Power On/Off: Touch the power icon (right key) on the mirror surface to turn the LED lights on or off.
  • Brightness Adjustment: When the lights are on, press and hold the power icon to cycle through brightness levels (dimmer function). Release when the desired brightness is achieved.
  • Color Temperature: (If applicable, not explicitly stated as 3-color dimmer in features, but in title) Repeatedly tap the power icon to switch between different color temperatures (e.g., warm white, natural white, cool white).
  • Smart Memory: The cabinet will remember your last-used brightness and color temperature settings when turned off and on again.

5.2. Defogger Function:

  • Activate Defogger: Touch the defogger icon (left key) on the mirror surface to activate the anti-fog function.
  • Automatic Shut-off: The defogger will automatically turn off after 45-60 minutes to conserve energy. You can manually turn it off by touching the defogger icon again.

6. Maintenance and Care

Proper care will ensure the longevity and appearance of your medicine cabinet.

  • Cleaning the Mirror: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror surface, to prevent liquid from seeping into the edges.
  • Cleaning the Frame: Wipe the anodized aluminum frame with a soft, damp cloth. Avoid abrasive cleaners or scouring pads that can scratch the finish.
  • Internal Cleaning: Remove shelves and wipe down the interior with a damp cloth. Ensure the cabinet is dry before replacing items.
  • Electrical Components: Do not spray water or cleaning solutions directly onto electrical components or wiring. Ensure the cabinet is dry before restoring power.
  • Hinge Care: The soft-close hinges are designed for durability. Avoid forcing the doors open or closed.

7. Troubleshooting

If you encounter issues with your medicine cabinet, refer to the following common problems and solutions:

ProblemPossible CauseSolution
LED lights do not turn on.No power supply; loose wiring; faulty touch sensor.Check circuit breaker. Verify electrical connections are secure. Contact a qualified electrician if unsure.
Defogger is not working.Defogger not activated; power issue.Ensure the defogger icon is touched to activate. Check power supply.
Mirror fogs up despite defogger.Extremely high humidity; defogger not on long enough.Ensure defogger is activated. Allow a few minutes for it to work. Improve bathroom ventilation.
Doors do not close softly.Hinges are damaged or misaligned.Inspect hinges for damage. Adjust hinge screws if necessary (refer to hinge manufacturer's guide if available).

If the problem persists after attempting these solutions, please contact Blossom customer support.

8. Product Specifications

FeatureDetail
BrandBlossom
Model NumberMCL11
Dimensions (D x W x H)5.25"D x 36"W x 32"H
ColorSilver
Mounting TypeWall Mount (Recess or Surface)
Number of Shelves3 (Adjustable, Tempered Glass)
Special FeaturesAdjustable Brightness, Built-in Defogger, Scratch Resistant, Smart Memory
Included Components2 Mirrored doors, 3 Shelves
Item Weight167 Pounds
CertificationsETL-certified, IP44-rated
CRI90+
UPC842708146372

9. Warranty Information

Blossom products are manufactured to high-quality standards. For specific warranty details regarding your LED Mirror Medicine Cabinet, please refer to the warranty card included with your purchase or visit the official Blossom website. Keep your proof of purchase for any warranty claims.

Extended protection plans may be available for purchase separately. Please inquire with your retailer for options such as 2-Year or 3-Year Protection Plans.

10. Customer Support

If you have any questions, require technical assistance, or need to report a damaged part, please contact Blossom customer support:

  • Website: Visit the Blossom Store on Amazon or the official Blossom website for FAQs and support resources.
  • Email: Refer to your product packaging or warranty card for direct email support.
  • Phone: Refer to your product packaging or warranty card for direct phone support.

Please have your model number (MCL11) and purchase date ready when contacting support.

© 2025 Blossom. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.