Product Overview
The KastLite 2-Lamp Electronic Ballast is a high-performance replacement designed for outdated magnetic fluorescent ballast systems. This unit is engineered for efficiency, providing reliable performance while reducing power consumption in your lighting fixtures. It ensures smooth, flicker-free operation and is compatible with a wide range of T8 and T12 fluorescent lamps.
Key features include:
- Energy-Efficient: Reduces power consumption compared to magnetic models.
- Versatile Compatibility: Supports F25T8, F25T12, F30T8, F30T12, F32T8, F34T12, F40T8, F40T10, and F40T12 lamps.
- Rapid Start Technology: Provides instant, flicker-free lighting.
- Enhanced Safety: Features Class P thermal protection, end-of-lamp-life protection, and an overcurrent fuse.
- Durable Construction: Built with a metal enclosure and thermal potting for longevity.
- Low Noise Operation: Class A sound rating for quiet performance.
- UL/CUL Listed: Meets safety and performance standards.
Image: The KastLite 2-Lamp Electronic Ballast, a compact white unit with pre-wired leads.
Safety Information
Always observe basic safety precautions when installing or servicing electrical equipment. This ballast operates on 120V, 50/60Hz power. Installation should only be performed by a qualified electrician or a knowledgeable individual with experience in electrical wiring to prevent electric shock or fire hazards.
- Disconnect power at the circuit breaker before installation, removal, or maintenance.
- Ensure all wiring connections are secure and comply with local and national electrical codes.
- Do not operate the ballast if it appears damaged.
- This ballast is Type 1 Outdoor rated, suitable for indoor use and enclosed outdoor fixtures.
Components Included
Your package includes:
- 1 x KastLite Electronic Ballast (Model: KL0173-IG230-ELSX)
Image: The electronic ballast with its pre-wired leads, ready for installation.
Specifications
| Feature | Detail |
|---|---|
| Model Number | KL0173-IG230-ELSX |
| Operating Voltage | 120V AC ± 10% |
| Frequency | 50/60Hz |
| Lamp Compatibility | F25T8, F25T12, F30T8, F30T12, F32T8, F34T12, F40T8, F40T10, F40T12 (for two lamps) |
| Min. Starting Temperature | 0°F (-17.78°C) |
| Max. Case Temperature | 158°F (70°C) |
| Protection | Class P Inherent Thermal Protection, End-of-Lamp-Life Protection, Overcurrent Fuse |
| Regulatory Approvals | UL, CUL Listed, FCC Part 18 |
| Material | Metal Enclosure, Lead Wires |
| Color | White |
Image: Diagram showing the dimensions of the KastLite electronic ballast in inches and millimeters.
Image: A table summarizing the features, benefits, and detailed specifications of the ballast.
Installation
Important: Ensure power is disconnected at the circuit breaker before beginning installation. This ballast is designed for easy installation with pre-wired leads that fit standard setups. Refer to the wiring diagram below for proper connections.
- Prepare the Fixture: Carefully remove the existing ballast from your fluorescent light fixture. Note the existing wiring configuration.
- Mount the New Ballast: Position the KastLite electronic ballast within the fixture. The compact size and lightweight design allow for installation in tight spaces. Secure it using appropriate fasteners.
- Wire the Input Power: Connect the black wire from the ballast to the incoming hot (line) wire and the white wire from the ballast to the incoming neutral wire.
- Wire the Lamps: Refer to the wiring diagram for connecting the ballast's blue, red, and yellow wires to your T8 or T12 fluorescent lamps. Ensure each lamp receives the correct connections for proper operation.
- Secure Connections: Use wire nuts or appropriate connectors to ensure all electrical connections are secure and insulated.
- Restore Power: Once all connections are verified and the fixture is reassembled, restore power at the circuit breaker.
Image: Detailed wiring diagram illustrating how to connect the ballast to two fluorescent lamps.
Operation
The KastLite electronic ballast operates automatically once properly installed and powered. Its rapid start technology ensures that connected fluorescent lamps illuminate instantly without flickering. The ballast continuously regulates power to the lamps, providing stable and efficient lighting.
Maintenance
The KastLite electronic ballast is designed for long-term, maintenance-free operation. Periodic inspection of the wiring connections and the ballast's physical condition is recommended to ensure continued safe and efficient performance. Ensure the fixture area remains free of excessive dust or debris to prevent heat buildup.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamps do not light up | No power to fixture; Incorrect wiring; Faulty lamps; Ballast failure | Check circuit breaker; Verify wiring against diagram; Replace lamps; Replace ballast if all else fails |
| Lamps flicker or dim | Loose connections; Incorrect lamp type; End-of-Lamp-Life protection activated | Tighten connections; Ensure lamps are compatible (T8/T12); Replace lamps |
| Ballast hums loudly | Loose mounting; Internal issue | Ensure ballast is securely mounted; If hum persists, ballast may need replacement |
| Ballast feels hot | Normal operation (up to 158°F max case temp); Overload; Poor ventilation | Ensure proper lamp compatibility; Check for adequate airflow around ballast; If excessively hot, disconnect power and inspect |
Warranty and Support
KastLite products are designed for durability and reliability. This product comes with an extended warranty. For specific warranty details, technical support, or assistance with installation, please contact KastLite customer service. You can find more information and contact details by visiting the official KastLite store on Amazon.
