InnoGear 500ml Aromatherapy Diffuser with Remote Control and 10 Essential Oils Set User Manual

Introduction

This manual provides instructions for the safe and efficient operation of your InnoGear 500ml Aromatherapy Diffuser. This ultrasonic cool mist diffuser is designed to humidify and diffuse essential oils, creating a pleasant atmosphere in your home or office. It features a remote control for convenient operation, multiple mist modes, an auto-off timer, and comes with a set of 10 essential oils.

What's Included

• InnoGear 500ml Aromatherapy Diffuser (Yellow)
• Remote Control
• 10-Piece Essential Oil Set (10ml bottles of Peppermint, Orange, Lavender, Tea Tree, Rosemary, Eucalyptus, Lemongrass, Lemon, Clove, Vanilla)
• Power Adapter
• Measuring Cup

Image: The InnoGear 500ml Aromatherapy Diffuser shown with the included 10-piece essential oil set.

Specifications

Safety Precautions

• Avoid direct skin contact with undiluted essential oils.
• Keep out of reach of children and pets.
• Ensure proper ventilation during use.
• Do not ingest essential oils.
• If you experience any adverse reactions, discontinue use and consult a healthcare professional.
• Always unplug the diffuser when not in use or before cleaning.
• Do not overfill the water tank; keep water below the MAX line.
• Do not fill the diffuser under running water to avoid water ingress into the air outlet or button areas.
• Always turn off the diffuser before adding water or essential oils.

Setup Instructions

1. Remove the top cover of the diffuser.
2. Fill the 500ml water tank with tap water using the provided measuring cup. Ensure the water level stays below the "500ml Max" line.
3. Add 10-15 drops of your preferred essential oil from the included 10-piece set directly into the water tank.
4. Replace the top cover securely.
5. Plug in the diffuser's power adapter to a wall socket and connect it to the diffuser.
6. Turn on the diffuser using the power button on the unit or the remote control.

Image: Filling the water tank of the InnoGear diffuser, ensuring water level is below the maximum line.

Operating Instructions

Using the Remote Control

The included remote control allows you to adjust settings from up to 16.5 feet away.

• ON/OFF: Power the diffuser on or off.
• INTERMITTENT: Activates mist release every 10 seconds.
• TIMING: Set the diffuser to run for 1 hour, 2 hours, or 3 hours.
• CONTINUOUS: Activates continuous mist output.
• BIG/SMALL: Adjusts mist intensity between strong and weak modes.
• LIGHT: Controls the ambient lighting, offering multiple colors and brightness options.

Image: A hand operating the remote control for the InnoGear diffuser, showing various function buttons.

Mist Modes and Duration

• Strong Mist: Operates for approximately 9-12 hours.
• Weak Mist: Operates for approximately 16-18 hours.
• The diffuser features a powerful upward mist flow, designed to efficiently humidify the air without wetting surrounding furniture.

Image: Visual representation of the diffuser's two mist modes (strong and weak) and their respective operating durations.

Ambient Lighting

• The diffuser offers multiple light settings with 8 different colors.
• You can choose to cycle through colors or select a single color to match your ambiance.
• Brightness can also be adjusted.

Image: The diffuser showcasing its capability to display 8 different ambient light colors.

Maintenance

To ensure optimal performance and longevity of your diffuser, regular cleaning is recommended.

1. Always unplug the diffuser before cleaning.
2. Empty any remaining water from the tank. Pour water out from the drain side to avoid water ingress into the air outlet.
3. Wipe the water tank and exterior with a soft, damp cloth.
4. For thorough cleaning, especially if essential oil residue builds up, use a cotton swab dipped in white vinegar to gently clean the ultrasonic atomizer plate at the bottom of the water tank.
5. Rinse the tank with clean water, ensuring no water enters the air outlet.
6. Allow all parts to air dry completely before reassembling or storing.

Troubleshooting

If you encounter issues with your InnoGear diffuser, refer to the following common troubleshooting tips:

1. Diffuser Leaks?

• Overfilling: Ensure water is below the 500ml MAX line. Overfilling can cause operational leakage from bubbling.
• Filling Method: Avoid filling under running water directly from a faucet. Use the measuring cup to fill the tank, preventing water from entering the air outlet or button areas.
• Open-Cover Operation: Do not operate the diffuser with the cover open, as this can cause bubbling-induced leakage.
• Draining: When emptying water, always pour from the designated "DRAIN SIDE" to prevent water ingress into internal components.

2. Mist Is Not Strong Enough or Product Stopped Working?

• Foam Pad: Check and remove any foam pad from the water basin. This pad is for packaging only and must be removed before use.
• Water Level: Ensure the water level is below the MAX line. Too high or too low water levels can affect mist output. Fill water to cover the atomizer but stay below the MAX line.
• Atomizer Clogs: Clear any clogs from the atomizer. Gently clean the atomizer with a cotton swab. Never use sharp tools, as this can damage the atomizer glaze.
• Mist Modes: Verify that the correct mist mode (continuous or intermittent) and timer settings are selected.

3. Diffuser Wouldn't Power On?

• Power Connection: Verify adapter connections to both the wall socket and the diffuser. Ensure they are securely plugged in.
• Water Level: The diffuser has an automatic shut-off feature when water runs low. Refill the water tank if it's empty.

4. The Remote Is Not Turning The Unit On?

• Battery Tab: Remove the battery insulation tab from the remote control to activate it.
• Battery Exhaustion: If the remote batteries are exhausted, replace them to operate.
• Control Range: Use the remote within its 16.5 ft control range.

Warranty & Support

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official InnoGear website. Keep your purchase receipt for warranty claims.