Introduction
The Kooper 114 LED Solar Outdoor Spotlight is designed for illuminating outdoor spaces. It features 114 LEDs, 100W power, and adjustable light levels via remote control. Equipped with motion and dusk sensors, it activates automatically, conserving energy. This spotlight is suitable for gardens, driveways, entrances, terraces, balconies, and outdoor work areas. It offers wall or freestanding installation and is IP67 weather-resistant. The unit is rechargeable via a solar panel and provides up to 12 hours of continuous light.
Setup Instructions
1. Unpacking and Component Check
Carefully unpack all components. Ensure the following items are present:
- Kooper 114 LED Solar Spotlight
- Solar Panel
- Remote Control (requires 2 AAA batteries, not included)
- Mounting Kit

Image: Kooper Solar Spotlight product box, illustrating the main components.
2. Solar Panel Placement
Position the solar panel in an area that receives direct sunlight for at least 5-6 hours daily. Optimal placement ensures maximum charging efficiency.

Image: The solar panel with its connecting cable.
3. Mounting the Spotlight
The spotlight can be installed freely or mounted on a wall using the included mounting kit. The spotlight features an adjustable rod, allowing you to direct the light as needed. Ensure the mounting surface is stable and secure.

Image: Front view of the Kooper 114 LED Solar Spotlight.
4. Connecting the Solar Panel
Connect the 5-meter cable from the solar panel to the designated port on the spotlight. Ensure the connection is secure to maintain weather resistance.
5. Initial Charging
Before first use, allow the solar spotlight to charge for 5-6 hours in direct sunlight. This ensures the internal 3000 mAh Li-ion battery is fully charged for optimal performance.
Operating Instructions
1. Remote Control Functions
The spotlight is operated using the remote control. Insert 2 AAA batteries (not included) into the remote. The maximum operating distance for the remote control is 5 meters.

Image: The remote control for the Kooper Solar Spotlight.
- ON/OFF: Press the 'ON' button to turn the spotlight on, and 'OFF' to turn it off.
- AUTO: Activates the automatic operating mode (dusk-to-dawn with motion sensor).
- Brightness Adjustment: Use the brightness buttons (often indicated by sun icons or up/down arrows) to cycle through three intensity levels.
- Timer Function: Press '3H', '5H', or '8H' to set the spotlight to turn off automatically after 3, 5, or 8 hours, respectively.
2. Automatic Operating Mode
When the 'AUTO' button is pressed, the spotlight utilizes its integrated dusk sensor and motion sensor. It will automatically turn on at dusk and turn off at dawn. When motion is detected within its range, the light will activate at full brightness and then dim or turn off after a period of no motion, conserving battery life.
Maintenance
Regular maintenance ensures optimal performance and longevity of your Kooper Solar Spotlight.
- Cleaning the Solar Panel: Periodically wipe the solar panel with a soft, damp cloth to remove dust, dirt, leaves, or snow. A clean panel ensures maximum sunlight absorption and charging efficiency.
- Cleaning the Spotlight: Clean the spotlight lens and housing with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or lens.
- Weather Resistance: The spotlight has an IP67 protection rating, making it resistant to dust and water immersion up to 1 meter for 30 minutes. While designed for outdoor use, ensure all connections remain secure.
- Battery Care: The integrated Li-ion battery is designed for long-term use. For best performance, ensure the unit receives adequate sunlight for charging. Avoid prolonged storage in a completely discharged state.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Spotlight does not turn on at night. | Insufficient solar panel charging. | Ensure solar panel is in direct sunlight for 5-6 hours daily. Clean the solar panel. |
| Light is dim or only lasts a short time. | Incomplete battery charge. | Verify solar panel placement and cleanliness. Allow more charging time. |
| Remote control is not working. | Dead or incorrectly inserted batteries. Remote out of range. | Replace AAA batteries in the remote. Ensure batteries are inserted correctly. Operate within 5 meters of the spotlight. |
| Automatic mode not functioning correctly. | Sensor obstruction or malfunction. | Ensure the dusk and motion sensors are clear of obstructions. Test in a dark environment. |
Specifications
| Feature | Specification |
|---|---|
| Brand | Kooper |
| Model Number | 5914860 |
| Color | Silver + Black |
| Product Dimensions | 17L x 180W x 270H mm |
| Usage | Outdoor |
| Power Source | Solar Powered |
| Control Method | Remote |
| Bulb Type | LED |
| Number of LEDs | 114 |
| Voltage | 6 Volts (DC) |
| Light Color | White |
| Wattage | 100 watts |
| Switch Type | Remote Control + Motion Sensor |
| Water Resistance Level | Waterproof (IP67) |
| Luminous Flux | 10000 lumens |
| Energy Efficiency Label | A+++ |
| Mounting Type | Wall Mount, Floor Mount (Freestanding) |
| Assembly Required | Yes |
| Shade Material | ABS |
| Included Components | Mounting kit |
| Battery | 3000 mAh Li-ion rechargeable battery |
| Solar Panel | 6V 6W Monocrystalline Silicon and Aluminum |
| Solar Panel Cable Length | 5 m |
| Solar Panel Dimensions | L. 27 x W. 18 x H. 1.7 cm |
| Spotlight Dimensions | L. 20 x H. 15 x P. 5 cm |
| Charging Time | 5-6 hours |
| Light Duration | 4-6-12 hours (depending on brightness) |
Warranty and Support
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your purchase receipt as proof of purchase.