Introduction
Thank you for choosing the Primevolve PF22 Portable Rechargeable Oscillating Fan. This manual provides essential information for the safe and efficient operation of your fan. Please read it thoroughly before use and retain it for future reference.
Image: The Primevolve PF22 fan demonstrating its compact, desktop, and fully extended floor configurations.
Key Features
- Telescopic Design: Adjustable height from 5.7 inches (compact) to 35.6 inches (floor mode).
- Automatic Oscillation: 120-degree horizontal oscillation for wide air distribution.
- Adjustable Tilt: 180-degree manual head tilt angle.
- Rechargeable Battery: Built-in 10000mAh battery provides 7-21 hours of wireless operation.
- USB-C Powered: Compatible with various USB power sources (PC, laptop, power bank, AC adapter, car charger).
- Multiple Speed Settings: 8-speed options, including a powerful 'H' wind mode.
- Quiet Operation: Operates at less than 30 dB at maximum speed.
- Timer Function: 8-hour timer settings.
- LED Night Light: Integrated LED light at the base for soft illumination.
- Remote Control: Convenient remote for power, speed, and oscillation control.
Image: Overview of the fan's features, highlighting remote control functionality and various settings.
Setup
- Unpacking: Carefully remove the fan and all accessories from the packaging. Ensure all components are present: fan unit, USB-C charging cable, and remote control.
- Initial Charge: Before first use, fully charge the fan. Connect the USB-C cable to the charging port on the fan's base and plug the other end into a compatible USB power source (e.g., wall adapter, power bank, computer). The charging indicator lights will show the charging status. A full charge takes approximately 5 hours.
- Unfolding the Fan:
- Locate the "OPEN" indicator on the side of the fan base.
- Gently twist and lift the top fan unit from the base.
- Extend the telescopic rod to your desired height for desktop or floor use. Ensure it clicks securely into place.
- Adjust the fan head's tilt angle (up to 180 degrees) manually.
Video: Demonstration of unfolding the fan and adjusting its height for various uses.
Image: Close-up of the USB-C charging port and various compatible charging methods.
Operating Instructions
The fan can be operated using the control panel on the base or the included remote control.
Control Panel Operation:
- Power ON/OFF: Press the power button (⏻) to turn the fan on or off.
- Speed Adjustment: Press the fan speed button (⇌) repeatedly to cycle through the 8-speed settings. The 'H' setting indicates the most powerful wind.
- Oscillation: Press the oscillation button (↻) to activate or deactivate the 120-degree automatic oscillation.
- Timer: Press the timer button (⏱) to set the fan to turn off automatically after a set period (up to 8 hours).
- LED Night Light: Press the light bulb button (💡) to turn the LED night light on or off.
Remote Control Operation:
The remote control offers convenient access to all fan functions from a distance.
- Power ON/OFF: Use the green (ON) and red (OFF) buttons.
- Speed Adjustment: Use the '+' and '-' buttons to increase or decrease fan speed.
- Other functions (oscillation, timer, night light) can also be controlled via dedicated buttons on the remote.
Image: Detailed view of the fan's control panel and remote control for easy operation.
Video: A user demonstrating the fan's various speed settings and oscillation feature.
Maintenance
- Cleaning: Ensure the fan is turned off and unplugged before cleaning. Use a soft, dry cloth to wipe down the exterior surfaces. For the fan blades, carefully open the front grille (if removable) and use a soft brush or cloth to remove dust. Do not use abrasive cleaners or immerse the fan in water.
- Storage: When not in use, collapse the fan to its compact position. Store it in a cool, dry place away from direct sunlight and extreme temperatures.
Image: The fan's height adjustment and compact storage capabilities.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | Battery is depleted. | Charge the fan using the USB-C cable. |
| Fan stops unexpectedly. | Battery is low or timer is active. | Recharge the fan or check timer settings. |
| Weak airflow. | Fan speed is too low or blades are dirty. | Increase fan speed or clean the fan blades. |
| Remote control not working. | Battery in remote is depleted or obstruction. | Replace remote battery or ensure clear line of sight to the fan. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Primevolve |
| Model Name | PF22 |
| Color | Dark Gray |
| Electric Fan Design | Floor Fan (convertible to Desk Fan) |
| Power Source | Battery Powered (10000mAh rechargeable) |
| Product Dimensions | 12"D x 7"W x 11.6"H (compact) |
| Adjustable Height | 5.7'' to 35.6'' |
| Noise Level | 30 Decibels (max speed) |
| Item Weight | 5.46 pounds (2.48 Kilograms) |
| Included Components | Remote, USB-C Charging Cable |
| Indoor/Outdoor Usage | Indoor, Outdoor |
| Number of Power Levels | 8 |
| Charging Time | Approx. 5 hours |
| Working Time | 7-21 hours (depending on speed) |
Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Primevolve website. Keep your purchase receipt as proof of purchase.
