LAMTTO 4K Dash Cam User Manual

1. Product Overview

The LAMTTO 4K Dash Cam is a high-performance dual dash camera system designed to provide comprehensive recording of your driving experience. It features 4K Ultra HD front recording and 1080P rear recording, ensuring clear and detailed footage. Equipped with 5G WiFi for easy app control, G-Sensor for automatic incident detection, loop recording, and 24-hour parking monitoring, this dash cam offers enhanced safety and convenience.

Figure 1.1: LAMTTO 4K Dash Cam main unit, rear camera, and included 64GB SD card, shown with a smartphone displaying live view.

2. Package Contents

Please check the package carefully to ensure all items are present and in good condition:

• 1 x 4K Front Dash Cam
• 1 x 1080P Rear Camera
• 1 x 64GB TF Card
• 1 x Car Charger
• 1 x Installation Tool (Plastic Crowbar)
• 1 x Suction Cup Mount
• 4 x Cable Clamps
• 2 x 3M Stickers for Rear Camera
• 1 x Card Reader
• 1 x Quick Guide Card
• 1 x User Manual

Figure 2.1: All components included in the LAMTTO 4K Dash Cam package, clearly labeled.

3. Setup Guide

3.1. Installing the Front Dash Cam

1. Clean the windshield area where you intend to mount the dash cam. Ensure it is free of dust and grease.
2. Attach the suction cup mount to the front dash cam.
3. Press the suction cup firmly against the cleaned windshield, ideally behind the rearview mirror to avoid obstructing your view.
4. Adjust the camera angle to ensure it captures the road ahead clearly. The camera offers 360-degree rotation for flexible positioning.

3.2. Installing the Rear Camera

1. Route the rear camera cable from the front dash cam to the rear of your vehicle. Use the included cable clamps to secure the cable along the headliner and door seals.
2. Mount the rear camera on the rear windshield using the provided 3M adhesive stickers. Ensure the lens has a clear view of the road behind.
3. Connect the rear camera cable to the designated port on the front dash cam.

Figure 3.1: Illustration of the easy installation process for the front and rear dash cameras.

3.3. Power Connection

1. Insert the included 64GB TF card into the dash cam's TF card slot. Ensure it is inserted correctly.
2. Plug the car charger into your vehicle's cigarette lighter socket.
3. Connect the other end of the car charger cable to the power input port on the front dash cam. The dash cam will automatically power on and begin recording when the vehicle's ignition is turned on.

4. Operating Instructions

4.1. Basic Operation

• Power On/Off: The dash cam powers on automatically with vehicle ignition. To manually power off, press and hold the power button.
• Recording: Recording starts automatically when the device is powered on. A red indicator light or on-screen icon typically indicates active recording.
• Menu Navigation: Use the physical buttons (MODE, UP, OK, DOWN, MENU) on the dash cam to navigate through settings and playback options on the device's screen.

4.2. Dual Recording

The LAMTTO 4K Dash Cam records simultaneously from both the front (4K 2160P) and rear (1080P) cameras, providing comprehensive coverage. The wide-angle lenses (170° front, 130° rear) capture multiple lanes of traffic and crucial details.

Figure 4.1: The dual vision capability of the dash cam, illustrating simultaneous recording from front and rear cameras.

5. App Control & WiFi

The dash cam features built-in 5G WiFi for seamless connection to your smartphone via the "Viidure" app (available on iOS and Android). This allows for easy viewing, downloading, and sharing of footage.

5.1. Connecting to the "Viidure" App

1. Download the "Viidure" app from the App Store (iOS) or Google Play Store (Android).
2. Turn on the dash cam's WiFi function (refer to the dash cam's on-screen menu for WiFi activation).
3. On your smartphone, go to WiFi settings and connect to the dash cam's WiFi network (SSID and password will be displayed on the dash cam screen).
4. Open the "Viidure" app. The app will automatically connect to the dash cam, allowing you to access live view, playback, and settings.

Note: Exiting the "Viidure" app or turning off your phone for a while will automatically disconnect the WiFi connection to conserve phone power.

Figure 5.1: The dash cam connected to a smartphone via 5G WiFi, demonstrating app control and video management.

6. Advanced Features

6.1. G-Sensor (Accident Lock)

The built-in three-axis MEMS gravity sensor automatically detects sudden shakes or collisions. When an impact is detected, the current video footage is automatically locked and saved to a separate "Event" folder, preventing it from being overwritten by loop recording. This ensures critical evidence is preserved.

Tip: It is recommended to adjust the G-sensor sensitivity to "medium". Setting the sensitivity too high will lock too many files, quickly filling up the storage space and requiring frequent manual cleaning. Setting it too low will cause vibration to not be detected and will not trigger the locking of the video.

Figure 6.1: How the G-Sensor detects impacts and locks video footage to prevent overwriting.

6.2. 24H Parking Monitor

The dash cam provides 24-hour parking monitoring. If a collision or significant vibration is detected while the car is parked, the recorder will automatically start capturing and saving video footage, typically starting 15 seconds before the collision, to obtain key evidence.

The built-in 200 mAh small battery can support a small number of triggering parking monitoring events. For longer parking sessions and continuous monitoring, it is highly recommended to purchase and install a dedicated hardwire kit to connect the dash cam directly to your car's fuse box for constant power.

Figure 6.2: The 24-hour parking monitoring feature, showing how it detects and records incidents when the vehicle is parked.

6.3. Loop Recording

The loop recording feature ensures continuous recording by overwriting the oldest unlocked footage with new data when the memory card is full. This eliminates the need for manual deletion and ensures uninterrupted operation.

Figure 6.3: Visual representation of the seamless loop recording process.

6.4. Night Vision (HDR/WDR)

Equipped with F1.5 aperture, a 6-glass lens, and HDR/WDR (High Dynamic Range/Wide Dynamic Range) technology, the dash cam delivers clear footage even in low-light conditions. This technology helps to balance bright and dark areas in the image, ensuring details like license plates are visible at night or in dark environments.

Figure 6.4: Demonstration of 4K WDR Night Vision, enhancing clarity in low-light conditions.

7. Maintenance

• Clean the Lenses: Regularly wipe the front and rear camera lenses with a soft, lint-free cloth to ensure clear recordings.
• Check SD Card: Periodically check the condition of the 64GB TF card. While loop recording manages space, it's good practice to format the card every few months to maintain optimal performance and prevent data corruption. (Note: Formatting will erase all data on the card, so back up important files first).
• Firmware Updates: Check the "Viidure" app or LAMTTO's official website for any available firmware updates to ensure your dash cam has the latest features and bug fixes.
• Temperature: Avoid exposing the dash cam to extreme temperatures for prolonged periods, especially direct sunlight in a parked car, as this can affect battery life and component longevity.

8. Troubleshooting

9. Specifications

10. Warranty & Support

LAMTTO provides a 24-month warranty for this product. Our responsive U.S. Support Team is available to assist you with setup, troubleshooting, and any other inquiries you may have, ensuring a worry-free ownership experience.

For support, please refer to the contact information provided on the Quick Guide Card or visit the official LAMTTO website.