Introduction
The Woowind Ventus Pro is a versatile and powerful portable tire inflator designed for quick and efficient inflation of various tires and inflatables. Its cordless design, high-pressure capability, and smart features make it an essential tool for vehicle owners and outdoor enthusiasts. This manual provides detailed instructions for safe operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
Figure 1: Woowind Ventus Pro Portable Tire Inflator and included accessories.
What's in the Box
Upon unboxing your Woowind Ventus Pro, please verify that all the following components are present:
- Woowind Ventus Pro Tire Inflator
- 12V DC Car Power Cable (for continuous use)
- 18-inch Braided Flexible Air Hose
- Universal Nozzles (Schrader, Presta, Dunlop valves, ball needle, nozzle adapter)
- USB Charging Cable
- Carrying Pouch
- User Manual (this document)
Figure 2: All components included with the Ventus Pro Tire Inflator.
Setup
- Initial Charging: Before first use, fully charge the Ventus Pro using the provided USB charging cable. Connect the USB-C end to the inflator and the USB-A end to a compatible USB power adapter (not included). The LED display will indicate charging status. A full charge ensures optimal performance.
- Connecting the Air Hose: Screw the braided flexible air hose securely onto the inflation port at the top of the inflator. Ensure it is hand-tight to prevent air leakage.
- Powering On: Press and hold the power button (usually the central button) for a few seconds until the LED display illuminates. The display will show the current pressure and selected mode.
Figure 3: The inflator can be charged via USB or powered by the 12V car cable for continuous use.
Operating Instructions
- Select Measurement Unit: Press the 'U' button to cycle through pressure units: PSI, BAR, KPA, and Kg/cm². Select your preferred unit.
- Choose Inflation Mode: Press the 'M' button to select from 5 smart preset modes: Car, Motorcycle, Bicycle, Ball, and Custom. Each mode has a default pressure range.
- Set Target Pressure: Use the '+' and '-' buttons to adjust the desired target pressure. The digital display will show the real-time pressure as you inflate.
- Connect to Valve: Screw the air hose nozzle firmly onto the tire valve stem. For different inflatables, use the appropriate universal nozzle adapter.
- Start Inflation: Press the power button to begin inflation. The inflator will automatically stop once the preset target pressure is reached.
- Emergency LED Light: The built-in LED flashlight can be activated by a short press of the light button. It also features an SOS emergency flashing mode for roadside safety.
Figure 4: The intuitive LED display and controls simplify the inflation process.
Figure 5: Ultra-fast inflation allows you to get back on the road quickly.
Versatility & Usage Scenarios
The Woowind Ventus Pro is designed to inflate a wide range of items:
Cars
Inflates car tires from 29-36 PSI in approximately 1 minute per tire.
Motorcycles
Inflates motorcycle tires from 22-40 PSI in about 30 seconds per tire.
Bicycles
Inflates bicycle tires from 0-150 PSI in about 45 seconds per tire.
Pickup Trucks
Inflates pickup truck tires from 17-42 PSI. Best used with the 12V car cable for continuous power.
Balls
Inflates various sports balls from 0-15 PSI in approximately 30 seconds per ball.
Other Inflatables
Suitable for various small inflatables using the appropriate nozzle adapters.
Figure 6: The Ventus Pro offers versatile inflation for multiple applications.
Maintenance
- Cleaning: Wipe the exterior of the inflator with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Storage: Store the inflator in its carrying pouch in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, charge the device regularly, even if not in frequent use. Avoid completely draining the battery before recharging.
- Air Hose Inspection: Periodically check the air hose for any signs of wear, cracks, or damage. Replace if necessary to ensure efficient and safe operation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Inflator does not turn on. | Low battery or power button not held long enough. | Charge the inflator fully. Press and hold the power button for 3-5 seconds. |
| Slow inflation or no inflation. | Air hose not securely connected; valve stem not properly attached; low battery. | Ensure air hose is tightly screwed. Re-attach nozzle to valve stem. Charge the inflator or use 12V DC car cable. |
| Inaccurate pressure reading. | Loose connection to valve stem; incorrect unit of measurement selected. | Ensure a tight seal on the valve stem. Verify the correct pressure unit (PSI, BAR, etc.) is selected. |
| Inflator overheats. | Continuous long-term operation. | Allow the inflator to cool down for at least 10-15 minutes before resuming use. The premium aluminum alloy body is designed to resist heat buildup, but prolonged use can still cause warming. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Woowind |
| Model Name | Ventus Pro |
| Power Source | Battery Powered (Lithium Ion) / 12V DC Car Cable |
| Battery Capacity | 4800mAh (Internal) |
| Voltage | 7.4 Volts |
| Maximum Operating Pressure | 150 PSI |
| Air Delivery Rate (Capacity) | 22 LPM (Liters Per Minute) |
| Noise Level | 85 dB |
| Dimensions (L x W x H) | 8.07 x 1.77 x 1.77 inches |
| Item Weight | 1.1 pounds (500 Grams) |
| Special Features | Cordless, LED Display, Emergency Light, Auto Shut-Off, 5 Smart Modes |
Warranty and Support
The Woowind Ventus Pro is backed by a 24-month warranty, ensuring peace of mind and long-term reliability. This warranty covers manufacturing defects and ensures the product meets its stated performance standards.
For any questions, concerns, or warranty claims, please contact our dedicated customer support team. We are always ready to assist you.
Please refer to the product packaging or the official Woowind website for the most up-to-date contact information and full warranty terms and conditions.
