Tilta NP-FZ100 Portable Charging Station User Manual

1. Introduction

The Tilta NP-FZ100 Portable Charging Station is designed for efficient and convenient charging of NP-FZ100 type batteries. This station allows for simultaneous charging of up to four batteries, featuring USB-C Power Delivery (PD) for fast charging and real-time status indicators. Its robust EDC (Everyday Carry) design ensures durability and portability for various shooting environments.

2. What's in the Box

Upon unboxing your Tilta NP-FZ100 Portable Charging Station, you should find the following items:

• Tilta NP-FZ100 Portable Charging Station (Green)
• USB-C to USB-C Charging Cable

Note: NP-FZ100 batteries and a 45W+ PD charger are sold separately and are required for optimal performance.

Image: The Tilta NP-FZ100 Portable Charging Station shown with its included USB-C cable and the top lid removed, revealing the four battery slots.

3. Product Overview

The Tilta NP-FZ100 Portable Charging Station combines functionality with a rugged aesthetic, making it an essential accessory for photographers and videographers.

3.1 Key Features

• Universal Design: Compatible with Sony, Tilta, and most third-party NP-FZ100 batteries.
• Four Slots: Allows users to charge four batteries simultaneously.
• USB-C Fast Charging: Provides a maximum of 45W power to charge four batteries in approximately 3 hours. A 45W+ PD charger and compatible cable are required for high-speed charging.
• Status Indicators: Real-time charging information is displayed for each battery slot.
• EDC Design: Features Tilta's signature aesthetic, made of engineering PC+ABS plastic with a matte finish, combining strength and durability.

Image: An infographic showcasing the key features of the charging station, including its compact size, real-time display, and capacity for four batteries.

4. Setup

Follow these steps to set up your Tilta NP-FZ100 Portable Charging Station:

1. Connect Power: Use the provided USB-C cable to connect the charging station to a compatible USB-C Power Delivery (PD) adapter. For optimal fast charging, ensure your PD adapter provides at least 45W of power and supports 9V/12V/15V output.
2. Open the Lid: Press the two side release buttons simultaneously to open the top lid of the charging station.
3. Insert Batteries: Carefully insert up to four NP-FZ100 batteries into the designated slots. Ensure the battery contacts align correctly with the charging pins in each slot.
4. Close the Lid: Once batteries are inserted, close the top lid until it securely clicks into place.

Image: The charging station with four NP-FZ100 batteries being charged via a USB-C connection, illustrating the fast charging capability.

5. Operating Instructions

The Tilta NP-FZ100 Portable Charging Station provides clear visual indicators for battery status:

• Charging Indication: When batteries are inserted and the station is powered, the indicator lights for each slot will illuminate to show the charging status.
• Green Light: Indicates a high battery level (90% - 100% charged).
• Yellow Light: Indicates a medium battery level (30% - 90% charged).
• Red Light: Indicates a low battery level (0% - 30% charged).
• Flashing Red Light: If the voltage from the power adapter is insufficient, a red light will flash. Ensure you are using a PD adapter that supports 9V/12V/15V and has a power output of at least 18W.
• Automatic Shut-off: The indicator lights will automatically turn off after 5 seconds if no charging is in progress.

Image: A visual guide to the real-time indicator lights on the charging station, explaining what green, yellow, and red lights signify regarding battery charge levels.

5.1 Video Demonstrations

6. Maintenance

• Keep the charging station clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
• Do not attempt to disassemble or repair the charging station yourself. Contact customer support for assistance.

7. Troubleshooting

7.1 Indicator Lights Flashing Red

If the indicator lights on your charging station are flashing red, it typically signifies that the connected Power Delivery (PD) adapter is not supplying sufficient voltage or wattage.

• Solution: Ensure you are using a PD adapter that supports 9V/12V/15V and has a power output of at least 18W. For optimal fast charging of four batteries, a 45W+ PD charger is recommended.

8. Specifications

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Tilta website or contact your authorized Tilta dealer. Keep your purchase receipt as proof of purchase for warranty claims.