Browning Strike Force Pro DCL Nano Trail Game Camera Bundle Instruction Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Browning Strike Force Pro DCL Nano Trail Game Camera Bundle. This advanced trail camera features Dual Camera Lens Technology for optimized day and night imaging, 4K video recording, and a rapid trigger speed, designed for reliable wildlife monitoring.

Image 1.1: The Browning Strike Force Pro DCL Nano Trail Game Camera Bundle, including the camera, a 32GB SD card, and a J-TECH USB memory card reader.

2. What's in the Box

Verify that all components are present in your package:

• Browning Strike Force Pro DCL Nano Trail Game Camera (Model: BTC5DCLN)
• 32GB SD Memory Card
• J-TECH USB Memory Card Reader (Compatible with iPhone/iPad/Android/PC)
• 6 ft. Camera Strap with Heavy Duty Metal Buckle
• Instruction Manual (this document)

Image 2.1: The J-TECH USB Memory Card Reader, compatible with various devices for convenient data transfer.

3. Setup

3.1. Battery Installation

The camera requires batteries for operation. Refer to the battery compartment for the correct battery type and orientation. Ensure batteries are inserted correctly to prevent damage.

3.2. Memory Card Insertion

1. Locate the SD card slot on the camera.
2. Insert the provided 32GB SD card into the slot with the label facing the correct direction until it clicks into place.
3. To remove, gently push the card in until it springs out.

3.3. Mounting the Camera

The camera is designed for outdoor use and can be mounted using the included tree strap and all-steel adjustable tree mount bracket.

1. Select a suitable tree or post for mounting. Ensure the camera has a clear view of the desired monitoring area.
2. Thread the 6 ft. camera strap through the mounting slots on the back of the camera.
3. Securely wrap the strap around the tree and fasten it using the heavy-duty metal buckle.
4. Adjust the camera angle using the all-steel adjustable tree mount bracket to achieve optimal positioning.

Image 3.1: The trail camera mounted on a tree, displaying its screen and control buttons for configuration.

Image 3.2: A wider view of the trail camera securely mounted to a tree, demonstrating its outdoor placement.

4. Operating Instructions

4.1. Powering On/Off

Locate the power switch on the camera. Slide it to the 'ON' position to power on the device. Slide it to 'OFF' to power off.

4.2. Navigating the Menu

The camera features a 1.5-inch color viewing screen and control buttons for menu navigation. Use the directional buttons to scroll through options and the 'OK' button to select.

Image 4.1: Front view of the trail camera, highlighting the dual lenses and infrared emitters.

4.3. Camera Settings

Access the camera's menu to configure settings:

• Mode: Select between Photo, Video, or Time-Lapse modes.
• Resolution: Adjust photo resolution (up to 26 MP effective still resolution) and video resolution (up to 4K Ultra HD).
• Trigger Speed: Set the trigger speed (as fast as 0.15 seconds).
• Detection Range: Configure the motion detection range (up to 100 ft.).
• Flash Range: Adjust the infrared flash range (up to 130 ft.).
• Video Length: Set video clip duration (5 seconds to 2 minutes).
• Date/Time: Set the current date and time for accurate timestamps on recordings.

4.4. Dual Camera Lens Technology

The camera utilizes two dedicated lenses: one optimized for sharp daytime photos and another for clear nighttime imagery. This technology, combined with RADIANT 6 Night Illumination, enhances image quality across various lighting conditions.

4.5. Using the J-TECH USB Memory Card Reader

The included J-TECH USB Memory Card Reader allows for easy viewing and transfer of photos and videos from your SD card to various devices without needing internet or batteries.

1. Remove the SD card from the trail camera.
2. Insert the SD card into the appropriate slot on the J-TECH reader.
3. Connect the reader to your iPhone (5 and later), iPad, Android phone (Micro USB or USB-C port), or PC via the corresponding connector.
4. Access the files on your device to view or transfer them. An extender may be required for thicker phone cases.

5. Maintenance

5.1. Cleaning

• Wipe the camera's exterior with a soft, damp cloth.
• Gently clean the lenses with a lens cleaning cloth to ensure clear images. Avoid abrasive materials.

5.2. Battery Replacement

Replace batteries when the low battery indicator appears on the screen or when performance degrades. Always use fresh batteries of the recommended type.

5.3. Memory Card Management

Regularly check the memory card capacity. Format the SD card periodically to maintain optimal performance and prevent data corruption. Back up important files before formatting.

6. Troubleshooting

• Camera Not Powering On: Ensure batteries are correctly installed and fully charged. Check for corrosion in the battery compartment.
• Poor Image/Video Quality: Clean the camera lenses. Verify settings for resolution and flash range. Ensure the camera is stable and not subject to excessive movement.
• Motion Detection Issues: Adjust the detection range and sensitivity settings. Ensure no obstructions are blocking the sensor.
• SD Card Errors: Reinsert the SD card. Try formatting the card (after backing up data). If issues persist, try a different compatible SD card.
• No Night Images: Check if the infrared flash is enabled in settings. Ensure there are no physical obstructions to the IR emitters.

7. Specifications

8. Warranty and Support

For warranty information and customer support, please refer to the specific warranty card included with your product or visit the official Browning website. Contact details for technical assistance are typically provided in the product packaging or on the manufacturer's support pages.