Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your TANLANIN TE-2019A Bluetooth 3-Speed Vinyl Record Player. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Package Contents
Verify that all items listed below are included in your package:
- TANLANIN TE-2019A Turntable Unit
- Power Cord
- 45 RPM Adapter
- User Manual (this document)
Product Overview and Components
Familiarize yourself with the various parts of your record player.
Image: Labeled diagram of the TANLANIN TE-2019A record player, showing the turntable platter, spindle, 45 RPM adapter, tone arm lift lever, speed selection switch, auto stop on/off switch, tone arm lock, ON/OFF button (volume control), headphone jack, and stylus.
- Turntable Platter: Surface where records are placed.
- Turntable Spindle: Center pin for records.
- 45 RPM Adapter: Used for playing 7-inch records with large center holes.
- Tone Arm Lift Lever: Raises and lowers the tone arm.
- Speed Selection Switch: Selects playback speed (33, 45, or 78 RPM).
- Auto Stop ON/OFF Switch: Engages or disengages the auto-stop function.
- Tone Arm Lock: Secures the tone arm when not in use.
- ON/OFF Button/Volume Control: Powers the unit on/off and adjusts speaker volume.
- Headphone Jack: For private listening with headphones.
- Stylus: The needle that reads the record grooves.
- Built-in Stereo Speakers: Integrated speakers for audio output.
- RCA Audio Out: Connects to external amplifiers or powered speakers.
- Power Port: Connects the power cord.
Setup
- Unpacking: Carefully remove the record player and all accessories from the packaging. Retain packaging for future transport or storage.
- Placement: Place the record player on a stable, level surface away from direct sunlight, heat sources, and excessive dust or vibration.
- Power Connection: Connect the power cord to the Power Port on the back of the unit and then plug it into a standard wall outlet.
- Dust Cover: The clear dust cover protects the platter and tone arm. It can be opened or closed during operation.
- Tone Arm Preparation: Release the tone arm lock.
Image: The TANLANIN TE-2019A record player in Light Pink, with its dust cover open, ready for use.
Operating Instructions
Playing Vinyl Records
- Power On: Turn the ON/OFF Button/Volume Control clockwise to power on the unit. The power indicator light will illuminate.
- Select Speed: Set the Speed Selection Switch to the appropriate speed (33, 45, or 78 RPM) for your record. Use the 45 RPM adapter for 7-inch singles if needed.
- Place Record: Place a vinyl record on the turntable platter.
- Auto Stop: Set the Auto Stop ON/OFF Switch to ON if you want the platter to stop spinning automatically when the record finishes. Set to OFF for continuous play or for some records that may trigger auto-stop prematurely.
- Start Playback:
- Lift the tone arm using the Tone Arm Lift Lever.
- Manually move the tone arm over the desired starting track of the record.
- Gently lower the tone arm onto the record using the Tone Arm Lift Lever. The record will begin to play.
- Adjust Volume: Rotate the ON/OFF Button/Volume Control to adjust the listening volume.
- Stop Playback:
- Lift the tone arm using the Tone Arm Lift Lever.
- Return the tone arm to its rest and secure it with the Tone Arm Lock.
- Turn the ON/OFF Button/Volume Control counter-clockwise to power off the unit.
Image: Detailed view showing the stylus on a record, the belt-driven design for smooth music playback, and illustrations of 7", 10", and 12" records with their corresponding 33, 45, and 78 RPM speeds.
Bluetooth Wireless Playback
The record player can receive audio wirelessly from Bluetooth-enabled devices.
- Power On: Turn the ON/OFF Button/Volume Control clockwise to power on the unit.
- Bluetooth Mode: The unit will automatically enter Bluetooth pairing mode. The Bluetooth indicator light will flash.
- Pair Device: On your smartphone or tablet, enable Bluetooth and search for "TE-2019A" (or similar model name). Select it to pair.
- Confirmation: Once paired, the Bluetooth indicator light will stop flashing and remain solid.
- Play Audio: Start playing music on your connected device. The audio will play through the record player's built-in speakers.
- Adjust Volume: Adjust volume using both your connected device and the record player's Volume Control.
Image: The record player connected wirelessly via Bluetooth to a smartphone, demonstrating its wireless playback capability.
AUX Input
Connect external audio devices (e.g., MP3 players, CD players) using an AUX cable.
- Connect Cable: Plug one end of a 3.5mm AUX cable into the AUX-in port on the record player and the other end into the headphone jack or AUX-out port of your external device.
- Power On: Turn the ON/OFF Button/Volume Control clockwise to power on the unit.
- Play Audio: Start playing music on your external device. The audio will play through the record player's built-in speakers.
- Adjust Volume: Adjust volume using both your external device and the record player's Volume Control.
Image: The record player with headphones connected to the AUX-in port, illustrating the wired audio input option.
RCA Output
Connect the record player to external amplifiers or powered speakers for enhanced audio output.
- Connect Cables: Connect RCA cables (not included) from the RCA Audio Out ports on the back of the record player to the corresponding input ports on your external amplifier or powered speakers.
- Power On: Power on the record player and your external audio system.
- Select Input: Select the correct input on your external audio system.
- Play Audio: Play a record or stream via Bluetooth/AUX. Audio will be routed through your external system.
- Adjust Volume: Adjust volume primarily through your external audio system. The record player's volume control will affect the built-in speakers, if active.
Image: An overview of the record player highlighting its wireless connectivity, AUX-in jack, RCA output, built-in speaker, and inclusion of a 45-speed adapter.
Maintenance
- Cleaning the Unit: Wipe the record player with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Dust Cover: Keep the dust cover closed when not in use to prevent dust accumulation on the platter and stylus.
- Stylus Care:
- Handle the stylus with extreme care. Avoid touching the stylus tip.
- Clean the stylus periodically with a soft brush, brushing from back to front.
- Replace the stylus when sound quality deteriorates or if the stylus is visibly damaged.
- Record Care: Keep records clean and free of dust. Store them vertically in their sleeves to prevent warping.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord not connected; Power outlet not active; Unit not turned on. | Ensure power cord is securely connected. Check power outlet. Turn the ON/OFF Button/Volume Control clockwise. |
| No sound from speakers | Volume too low; Incorrect input selected (if using external speakers); Stylus not on record; Tone arm lift lever engaged. | Increase volume. Ensure tone arm is lowered onto the record. Check input selection on external system. |
| Record skips | Dirty or scratched record; Stylus dirty or worn; Record player not level; Excessive vibration. | Clean record. Clean or replace stylus. Ensure unit is on a stable, level surface. Avoid placing near vibrating objects. |
| Bluetooth not connecting | Bluetooth not enabled on device; Device too far; Incorrect device selected. | Ensure Bluetooth is enabled on your device. Keep device within range (approx. 10 meters). Select "TE-2019A" from your device's Bluetooth list. |
| Platter not spinning | Power off; Belt dislodged; Auto-stop engaged prematurely. | Check power. If belt is dislodged, contact support. Try setting Auto Stop to OFF. |
Specifications
- Brand: TANLANIN
- Model Name: TE-2019A-PK-TA
- Color: Light Pink
- Material: Acrylic, Engineered Wood
- Speeds: 33 1/3, 45, 78 RPM
- Drive Type: Belt-Drive
- Connectivity: Bluetooth 5.0, AUX-in, RCA Output
- Built-in Speakers: Yes
- Auto Stop: Yes
- Dimensions (L x W x H): 14" x 11" x 5" (approximately)
- Power Source: Corded Electric
- Included Components: Turntable, Power cord, 45 RPM Adapter, User manual
Official Product Video
Video: An official product video demonstrating the TANLANIN TE-2019A record player in pink, showcasing its features such as playing vinyl, built-in stereo speakers, RCA line output, and Bluetooth connectivity. The video illustrates the process of placing a record, adjusting volume, and connecting a smartphone via Bluetooth.
Warranty and Support
This TANLANIN record player comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For warranty claims, technical assistance, or any questions regarding your product, please contact TANLANIN customer support through the retailer where the product was purchased or visit the official TANLANIN website for contact information.
Please have your model number (TE-2019A) and proof of purchase ready when contacting support.