1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your ARCTIC Xtender VG (Mirror Black) PC Case. Please read this manual thoroughly before beginning installation to ensure proper setup and to maximize the performance and longevity of your system. Keep this manual for future reference.
2. Safety Information
Observe the following safety precautions to prevent damage to the product or injury to yourself:
- Always disconnect power from all components before installation or maintenance.
- Handle components with care to avoid electrostatic discharge. Use an anti-static wrist strap if available.
- Be aware of sharp edges inside the case.
- Do not attempt to modify the case or its components. Unauthorized modifications may void your warranty.
- Ensure the case is placed on a stable, level surface to prevent tipping.
3. Package Contents
Verify that all components are present in the package:
- ARCTIC Xtender VG PC Case
- Vertical GPU Mount with 160mm PCIe Gen 4 Riser Cable
- 5 x ARCTIC P14 Pro Reverse A-RGB Fans (pre-mounted)
- Accessory Box (screws, standoffs, cable ties)
- User Manual (this document)
Image: Included accessory box containing various screws, standoffs, and cable ties for component installation.
Image: Exploded view illustrating all major components of the ARCTIC Xtender VG PC case, including panels, fans, and mounting hardware.
4. Product Overview
The ARCTIC Xtender VG is a full tower PC case designed for high-performance systems, featuring extensive cooling support and a vertical GPU mounting option.
Key Features:
- Vertical GPU Mounting: Integrated support for vertical graphics card installation, including a PCIe Gen 4 riser cable.
- P14 Pro Reverse A-RGB Fans: Three side-mounted fans with inverted airflow for optimal cooling and aesthetic display.
- Radiator Support: Accommodates two 420 mm, 360 mm, 280 mm, or 240 mm radiators for advanced liquid cooling solutions.
- Mirror Glass Panel: A reflective tempered glass side panel that conceals the interior until A-RGB lighting is active.
- A-RGB PSU Cover: An integrated glass panel with 24 individually addressable RGB LEDs illuminates the power supply shroud.
Image: Front-side view of the ARCTIC Xtender VG PC case, showcasing the mirrored glass panel and illuminated A-RGB fans.
Image: Direct front view of the ARCTIC Xtender VG PC case, highlighting the mirrored glass panel.
Image: Interior view of the ARCTIC Xtender VG PC case, showing the pre-installed A-RGB fans and the spacious layout.
Image: Top view of the ARCTIC Xtender VG PC case, displaying the top ventilation and front I/O ports.
Image: Close-up of the ARCTIC A-RGB PSU cover, showing the illuminated logo and integrated glass panel.
5. Setup and Installation
Follow these steps for proper installation of your PC components.
5.1. Preparing the Case
- Place the case on a flat, stable surface.
- Carefully remove the side panels. The mirrored glass panel is typically secured with thumbscrews or a latch mechanism.
5.2. Motherboard Installation
- Install the necessary motherboard standoffs into the motherboard tray according to your motherboard's form factor (E-ATX compatible).
- Place the I/O shield into the rear opening of the case.
- Carefully align your motherboard with the standoffs and I/O shield, then gently lower it into place.
- Secure the motherboard with the provided screws.
5.3. Power Supply Unit (PSU) Installation
- Mount the PSU into its designated compartment at the bottom rear of the case.
- Secure the PSU with screws from the rear of the case.
5.4. Storage Drive Installation
The case supports multiple 2.5" SSDs and 3.5" HDDs. Refer to the drive bay diagram for locations.
Image: Internal view highlighting the dedicated mounting locations for 2.5-inch SSDs and 3.5-inch HDDs.
Image: Diagram illustrating the various 2.5-inch and 3.5-inch drive bay locations within the case.
5.5. Vertical Graphics Card (GPU) Installation
The Xtender VG includes a vertical GPU mount and a PCIe Gen 4 riser cable.
- Remove the standard horizontal PCIe slot covers if necessary.
- Install the vertical GPU mount into the designated area.
- Connect the PCIe Gen 4 riser cable to the motherboard's primary PCIe x16 slot.
- Mount your graphics card onto the vertical bracket and connect it to the riser cable.
- Secure the graphics card to the vertical mount with screws.
Image: Internal view demonstrating the vertical GPU mount with the PCIe riser cable installed, ready for a graphics card.
5.6. Cable Management
Utilize the cable routing channels and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics.
Image: Close-up view of the cable routing paths and Velcro straps behind the motherboard tray for organized cable management.
Image: Detailed view of the integrated cable management channels designed to guide and conceal cables.
6. Operating Instructions
6.1. Power On/Off
After all components are installed and connected, replace the side panels. Connect the power cable to your PSU and a wall outlet. Press the power button located on the top I/O panel to turn on your system.
Image: Close-up of the top I/O panel, indicating the locations of 2x USB-A, 1x USB-C, 3.5mm audio jack, and the power button.
6.2. A-RGB Lighting Control
The pre-installed A-RGB fans and PSU cover can be controlled via your motherboard's A-RGB software (if compatible) or a dedicated A-RGB controller (not included unless specified). Refer to your motherboard manual for A-RGB header connections and software usage.
6.3. Airflow Optimization
The case is designed for efficient airflow with pre-installed reverse airflow fans on the side. Ensure no obstructions block the intake and exhaust vents for optimal cooling performance.
Image: Diagram showing the optimized internal airflow paths, with cool air intake and warm air exhaust, ensuring efficient cooling.
7. Maintenance
Regular maintenance helps maintain optimal performance and extends the lifespan of your PC components.
- Dust Filters: The case includes removable dust filters. Periodically clean these filters by gently washing them with water and allowing them to dry completely before reinstallation.
- Interior Cleaning: Use compressed air to remove dust from internal components and fans. Ensure the system is powered off and unplugged before cleaning.
- Exterior Cleaning: Wipe the exterior surfaces, including the glass panel, with a soft, damp cloth. Avoid abrasive cleaners.
8. Troubleshooting
If you encounter issues, refer to the following common troubleshooting steps:
- System Not Powering On:
- Check all power connections, including the PSU to wall outlet, PSU to motherboard, and front panel power switch header.
- Ensure the PSU switch is in the 'ON' position.
- No Display Output:
- Verify that your monitor is connected to the graphics card (GPU) output, not the motherboard's integrated graphics output.
- Reseat the graphics card and ensure the PCIe riser cable is securely connected.
- Check RAM modules are properly seated.
- Fans Not Spinning/RGB Not Working:
- Ensure all fan and A-RGB cables are correctly connected to the motherboard or controller.
- Check your motherboard's BIOS/UEFI settings or A-RGB software for fan speed and lighting control.
- Overheating:
- Ensure all fans are spinning correctly and in the proper direction.
- Clean dust filters and internal components.
- Verify proper installation of CPU cooler and thermal paste.
9. Specifications
| Feature | Specification |
|---|---|
| Brand | ARCTIC |
| Model Name | ACPCC00019A |
| Case Type | Full Tower |
| Motherboard Compatibility | Extended ATX (up to 285mm) |
| Color | Black VG - Mirrored |
| Material | Metal, Tempered Glass |
| Item Weight | 15.4 Kilograms (33.9 pounds) |
| Product Dimensions (LxWxH) | 52.9 x 23.1 x 52.9 cm (20.83 x 9.09 x 20.83 inches) |
| GPU Clearance | Up to 482 mm (337 mm with side radiator) |
| PSU Clearance | Up to 318 mm (200 mm with HDD cage) |
| Cooling Method | Air (5x A-RGB fans pre-mounted) |
| Radiator Support | Top: 240/280/360/420 mm Side: 240/280/360/420 mm |
| Drive Bays | Multiple 2.5" SSD and 3.5" HDD bays |
| Front I/O | 2x USB-A, 1x USB-C, 3.5mm Audio Jack, Power Button |
Image: Technical diagram illustrating the overall dimensions (length, width, height) of the ARCTIC Xtender VG PC case and internal component clearances.
Image: Diagram detailing the supported radiator sizes and mounting locations on the top and side of the case.
Image: Diagram illustrating the various fan mounting locations and supported fan sizes throughout the ARCTIC Xtender VG case.
10. Warranty and Support
ARCTIC products are manufactured to high quality standards. For warranty information and technical support, please visit the official ARCTIC website or contact their customer service directly. Keep your proof of purchase for warranty claims.
For further assistance, please visit: www.arctic.ac
