1. Introduction
This manual provides essential information for the safe and efficient operation of your FULEN CL06 Rechargeable Motion Sensor Ceiling Light. Please read it thoroughly before installation and use, and retain it for future reference.
Image 1.1: FULEN CL06 Rechargeable Motion Sensor Ceiling Light, remote control, and USB-C charging cables.
2. Safety Information
- This product is designed for indoor use only.
- Do not expose the light to extreme temperatures or humidity. While water-resistant, it is not designed for direct water immersion.
- Keep out of reach of children.
- Use only the provided USB-C cable for charging.
- Do not attempt to disassemble or modify the light. This will void the warranty and may cause damage or injury.
- Ensure the mounting surface is clean and dry before installation.
3. Package Contents
Verify that all items are present in your package:
- FULEN CL06 Ceiling Light (x1)
- Remote Control (x1)
- USB-C Charging Cable (x1)
- Long Metal Sheets (x2)
- Screw Accessories Kit (x1)
Image 3.1: All components included in the FULEN CL06 product package.
4. Product Features
- High-Capacity Battery: Integrated 12000mAh rechargeable battery for extended use.
- Motion Sensor: Detects movement within a 1-16 feet range and 120° detection angle.
- Multiple Modes: Day Sensor, Night Sensor, and Steady-On modes.
- Adjustable Color Temperature: Choose from Warm White (3000K), Natural (4500K), and Cool White (6000K).
- Dimmable Brightness: 5 levels of brightness adjustment.
- Remote Control: Conveniently adjust settings from a distance.
- Cordless Installation: Magnetic mounting with included metal sheets, no drilling required.
- Ultra-Thin Design: Slim profile (approximately 0.7 inches thick) for optimized space.
Image 4.1: Key features of the FULEN CL06 light.
5. Setup and Installation
The FULEN CL06 light offers a simple, cordless installation process using magnetic attachment.
5.1 Charging the Light
Before first use, fully charge the light. Connect the provided USB-C cable to the charging port on the light and to a standard USB power adapter (not included). The large 12000mAh battery requires approximately 8 hours for a full charge. The charging indicator light will change when fully charged.
Image 5.1: USB-C charging port and battery capacity indicator.
5.2 Mounting the Light
The light can be mounted using the included metal sheets and adhesive, or for a more permanent solution, with screws.
- Prepare the Surface: Ensure the desired mounting surface is clean, dry, and smooth.
- Attach Metal Sheets: Peel off the protective film from the adhesive side of the metal sheet. Firmly press the metal sheet onto the desired location on the ceiling or wall. For added security, use the included screws to fasten the metal sheets.
- Attach the Light: The FULEN CL06 light has strong magnets on its back. Align the light with the installed metal sheets and allow the magnets to securely attach it.
Image 5.2: Cordless installation steps.
The light can be easily removed from the metal sheets for recharging or changing settings.
6. Operating Instructions
The FULEN CL06 light can be operated using the physical switch on the unit or the included remote control.
6.1 Physical Switch
On the side of the light, there is a slide switch with three positions:
- OFF: Turns the light off.
- ON: Activates the light in its last-used mode (motion sensor or steady-on).
- MODE: Cycles through the motion sensor modes (Day/Night) and Steady-On mode.
6.2 Remote Control Functions
The remote control provides comprehensive control over the light's features.
Image 6.1: FULEN CL06 Remote Control layout and functions.
- ON/OFF: Turns the light on or off.
- Brightness +/-: Adjusts the light intensity (5 levels).
- Day Sensor: Activates motion sensing during both day and night. The light will turn on when motion is detected and turn off after 30 seconds of no motion.
- Night Sensor: Activates motion sensing only in low-light conditions. The light will turn on when motion is detected in darkness and turn off after 30 seconds of no motion.
- Remote Control (Steady Mode): Keeps the light continuously on.
- Color Temperature Buttons (3000K/4500K/6000K): Selects the desired light color:
- 3000K (Warm White): Soft, yellowish light.
- 4500K (Natural White): Balanced, neutral white light.
- 6000K (Cool White): Bright, bluish-white light.
- Timer Buttons (30 min/60 min): Sets the light to automatically turn off after 30 or 60 minutes in Steady-On mode.
Image 6.2: Adjustable color temperatures (3000K, 4500K, 6000K).
6.3 Motion Sensor Performance
The motion sensor has a detection range of approximately 1-16 feet and a 120-degree angle. For optimal performance, install the light at a height between 3-13 feet.
Image 6.3: Motion sensor detection range and angle.
7. Charging and Battery Life
The FULEN CL06 is equipped with a 12000mAh battery, providing extended usage times.
- Charging Time: Approximately 8 hours for a full charge using the USB-C cable.
- Battery Life (Motion Sensor Mode): Up to 2 months in Night Sensor mode.
- Battery Life (Constant-On Mode): Up to 12 hours, depending on brightness settings.
When the battery is low, the light output may dim. Recharge the light promptly to maintain optimal performance.
Image 7.1: Charging the FULEN CL06 light and expected battery duration.
8. Maintenance
- Cleaning: Wipe the light with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Care: For optimal battery longevity, avoid fully discharging the battery frequently. Recharge the light when the brightness noticeably decreases. If storing the light for an extended period, charge it fully every 3-6 months.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is depleted. | Charge the light fully using the USB-C cable. |
| Motion sensor not working. | Incorrect mode selected (e.g., Day Sensor in dark room, Night Sensor in bright room). Obstruction blocking sensor. | Ensure the correct motion sensor mode (Day/Night) is selected for ambient light conditions. Clear any obstructions from the sensor's path. |
| Remote control not responding. | Remote battery depleted. Obstruction between remote and light. | Replace the D battery in the remote control. Ensure a clear line of sight to the light. |
| Light dims quickly or battery life is short. | High brightness setting. Frequent activation in motion sensor mode. Battery degradation over time. | Reduce brightness setting. Consider using Night Sensor mode if applicable. Ensure the light is fully charged. |
10. Specifications
| Feature | Detail |
|---|---|
| Brand | FULEN |
| Model | CL06 |
| Dimensions (L x W x H) | 12.3" x 5.8" x 0.7" (31.2cm x 14.7cm x 1.7cm) |
| Item Weight | 1.34 pounds (0.61 kg) |
| Material | Plastic |
| Power Source | Battery Powered |
| Battery Capacity | 12000mAh |
| Light Source Type | LED |
| Brightness | 600 Lumen |
| Color Temperature | 3000K / 4500K / 6000K (Adjustable) |
| Special Features | Adjustable Color Temperature, Dimmable, Energy Efficient, Motion Sensor, Timer |
| Control Method | Remote Control, Slide Switch |
| Installation Type | Flush Mount (Magnetic) |
| Indoor/Outdoor Usage | Indoor Only |
| Water Resistance Level | Water Resistant |
Image 10.1: FULEN CL06 Product Dimensions.
11. Warranty and Support
The FULEN CL06 Rechargeable Motion Sensor Ceiling Light comes with an extended warranty. For warranty claims, technical support, or any questions regarding your product, please contact FULEN customer service through the retailer's platform or the official FULEN website.
