Introduction
Thank you for choosing the WLIVE ASNG132 6-Drawer Tall Fabric Dresser. This manual provides essential information for the safe assembly, operation, and maintenance of your new storage unit. Please read these instructions carefully before beginning assembly and retain them for future reference.
Image: The WLIVE ASNG132 6-Drawer Tall Fabric Dresser, white, shown in a bedroom setting next to a closet.
Safety Information
- Always assemble the dresser on a soft, clean surface to prevent scratches.
- Ensure all parts are securely fastened before use. Do not overtighten screws.
- Do not allow children to climb on or play with the dresser.
- Use the provided anti-tilt device to secure the dresser to a wall, preventing accidental tipping.
- Do not exceed the weight capacity of the drawers or the top surface.
- Keep small parts away from children during assembly to avoid choking hazards.
Image: Illustration of the anti-tilt safety device, demonstrating its importance in preventing the dresser from tipping over, especially with children nearby.
Package Contents
Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Metal Frame Components: Side frames, crossbars, support rods.
- Wood Top: 1 piece.
- Fabric Drawers: 6 foldable drawers with handles.
- Hardware: Screws, Allen wrench, adjustable feet, anti-tilt kit.
Refer to the assembly instructions video for a detailed visual list of all parts.
Setup and Assembly
Follow these steps to assemble your WLIVE 6-Drawer Tall Fabric Dresser. It is recommended to have a second person assist with assembly for stability.
- Prepare the Frame: Connect the metal frame components using the provided screws and Allen wrench. Ensure all connections are firm.
- Attach the Wood Top: Secure the wood top to the assembled metal frame.
- Install Adjustable Feet: Screw the adjustable feet into the bottom of the frame. Adjust them to ensure the dresser is stable and level on any surface.
- Assemble Drawers: Insert the bottom panel into each fabric drawer and attach the handles.
- Insert Drawers: Slide the assembled fabric drawers into the designated slots in the frame.
- Install Anti-Tilt Device: Secure the anti-tilt device to the top rear of the dresser and to a wall stud, following the instructions provided with the kit.
For a visual guide, please watch the official installation video:
Video: Official installation guide for the WLIVE Tall Dresser, demonstrating step-by-step assembly.
Image: Detailed view of the dresser's sturdy steel frame, highlighting the triangle support and solid drawer slides for enhanced durability.
Operating Instructions
The WLIVE 6-Drawer Tall Fabric Dresser is designed for convenient storage and organization.
- Drawer Use: Gently pull the curved handles to open the fabric drawers. Push them back in until they are flush with the frame.
- Storage Capacity: Utilize the six spacious fabric drawers for organizing clothes, accessories, linens, or other household items. The wood top provides additional display space for decorative items or essentials.
- Adjustable Feet: The dresser features 4 all-directional adjustable feet. Rotate them to fine-tune the height and ensure stability on uneven floors, protecting your floor from scratches.
Image: Visual representation of the dresser's dimensions: 11.73"D x 15.67"W x 39.37"H, with individual drawer dimensions.
Image: Detailed view of a fabric drawer, illustrating its 3-tier structure (PVC, MDF board, non-woven fabric) for durability and breathability, along with the easy-to-pull handle.
Maintenance
- Cleaning the Wood Top: The P2 grade artificial wood top is scratch-resistant and easy to clean. Wipe with a soft, damp cloth and mild detergent if necessary. Avoid abrasive cleaners.
- Cleaning Fabric Drawers: The breathable non-woven fabric drawers can be spot cleaned with a damp cloth and mild soap. Do not machine wash or tumble dry. Allow to air dry completely.
- Metal Frame Care: Wipe the metal frame with a soft, dry cloth to remove dust. Avoid harsh chemicals that may damage the finish.
- Regular Checks: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dresser is wobbly. | Uneven floor or loose adjustable feet. | Adjust the leveling feet at the bottom of the frame until the dresser is stable. Ensure all frame screws are tightened. |
| Drawers do not slide smoothly. | Drawer not properly inserted or obstruction. | Remove the drawer and re-insert it, ensuring it aligns correctly with the frame's slides. Check for any items obstructing the drawer's path. |
| Dresser feels unstable. | Anti-tilt device not installed or loose frame connections. | Install the anti-tilt device as per instructions. Verify all frame screws are securely tightened. |
Specifications
- Brand: WLIVE
- Model Name: ASNG132
- Product Dimensions: 11.73"D x 15.67"W x 39.37"H
- Color: White
- Material: Fabric, Metal, Wood (P2 grade artificial wood top)
- Number of Drawers: 6
- Item Weight: 14.78 Pounds
- Assembly Required: Yes
Image: A detailed graphic illustrating the overall dimensions of the dresser and the internal dimensions of a single drawer.
Warranty and Support
WLIVE products are designed for quality and durability. For specific warranty information, please refer to the documentation included with your purchase or contact WLIVE customer support directly.
If you encounter any issues or have questions regarding your dresser, please reach out to our customer service team for assistance. Contact details can typically be found on the product packaging or the official WLIVE website.