1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your ARES WING Foldable Sim Racing Wheel Stand with Chair Fixing Slot. Please read this manual thoroughly before use to ensure proper setup and to maximize your racing experience. This stand is designed to be compatible with a wide range of racing accessories and gaming platforms.
2. Safety Information
- Ensure all bolts and fasteners are securely tightened before each use to prevent instability.
- Keep hands and fingers clear of moving parts during adjustment to avoid pinching.
- Do not exceed the recommended weight limits for attached racing equipment.
- Place the stand on a flat, stable surface to prevent tipping.
- Store the stand in a safe location when folded to prevent accidental falls.
3. Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Main Frame Assembly
- Steering Wheel Plate
- Pedal Plate
- Shifter Mount
- Chair Fixing Slot Extension
- Hardware Kit (bolts, nuts, washers, Allen keys)
- Cable Management Ties
- Instruction Manual
4. Setup and Assembly
Assembly typically takes approximately 15 minutes. Follow these steps carefully.
4.1 Unpacking and Initial Inspection
Carefully remove all components from the packaging. Lay them out and compare with the package contents list to ensure everything is present and undamaged.
4.2 Main Frame Assembly
Unfold the main frame of the stand. Ensure all locking mechanisms click into place securely. The triangular frame design provides enhanced stability.
Figure 4.2.1: Fully assembled ARES WING Sim Racing Wheel Stand, showcasing its robust structure and integrated chair fixing slot. Racing wheel, pedals, and shifter are not included.
4.3 Attaching the Steering Wheel Plate
Attach the steering wheel plate to the main frame using the provided hardware. Ensure it is oriented correctly for your preferred setup. The plate features pre-drilled holes for various racing wheel brands.
4.4 Installing the Pedal Plate
Secure the pedal plate to the base of the stand. This plate is adjustable to four different angles for optimal pedal positioning.
4.5 Mounting the Shifter
The shifter mount can be installed on either the left or right side of the stand, depending on user preference. Use the appropriate hardware to secure it firmly.
4.6 Securing the Chair Fixing Slot
Attach the chair fixing slot extensions to the front base of the stand. These extensions are designed to hold your gaming chair in place, preventing unwanted movement during intense racing sessions. The depth is adjustable to accommodate different chair sizes.
Figure 4.6.1: Detail of the adjustable chair fixing slot and anti-slip feet, designed to secure a gaming chair and prevent movement.
4.7 Attaching Racing Equipment
Mount your racing wheel, pedals, and shifter to their respective plates using the hardware provided with your racing equipment. The stand features pre-drilled holes compatible with major brands.
Figure 4.7.1: The stand demonstrates wide compatibility with racing accessories from Logitech (G25, G27, G29, G920, G PRO), Fanatec, and Thrustmaster. Racing gear is not included.
5. Operating Instructions
5.1 Adjusting Height and Angle
The steering wheel platform offers a tilt adjustment range from -15° to +15° and a height adjustment of 6.6 inches. Loosen the adjustment knobs, set to your desired position, and re-tighten firmly.
Figure 5.1.1: Visual representation of the adjustable features, including 6.6-inch height adjustment, 12°/16°/20°/24° pedal tilt, and -15°/0°/+15° wheel panel tilt. The shifter mount supports both left and right side installation.
5.2 Pedal Platform Adjustment
The pedal platform can be adjusted to four different angles: 12°, 16°, 20°, and 24°. Select the angle that provides the most comfortable and ergonomic foot position for your racing style.
5.3 Ergonomic Comfort
The upgraded frame design provides ample leg space (21.8 inches wide) for extended gaming sessions. Adjust all components to achieve your optimal driving position.
Figure 5.3.1: A user demonstrates the comfortable wide leg space (21.8 inches) and maximum height (32.3 inches) of the stand, allowing for prolonged play without discomfort.
5.4 Folding for Storage
The stand features a foldable design for convenient storage without needing to remove your racing equipment. Release the locking mechanisms, fold the stand, and use the included self-adhesive tie to secure it in its compact form.
Figure 5.4.1: The stand can be easily folded for compact storage, even with racing gear attached. A self-adhesive tie is included to keep it secure in the folded position.
6. Maintenance
- Cleaning: Wipe down the stand with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Fastener Check: Periodically check all bolts and screws to ensure they remain tight. Re-tighten as necessary to maintain stability.
- Storage: When not in use, fold the stand and store it in a dry, cool place away from direct sunlight or extreme temperatures.
7. Troubleshooting
7.1 Stand Feels Unstable
- Ensure all assembly bolts are fully tightened.
- Verify that the stand is placed on a flat, level surface.
- Check that the chair fixing slot is properly engaged with your gaming chair to prevent chair movement.
7.2 Racing Equipment Does Not Fit
- Confirm that your racing wheel, pedals, and shifter are compatible with the pre-drilled mounting holes (Fanatec, Thrustmaster, Logitech, Moza, Simagic).
- Some equipment may require specific mounting brackets not included with the stand. Refer to your equipment's manual.
7.3 Difficulty Adjusting Components
- Ensure adjustment knobs or levers are fully loosened before attempting to change positions.
- Do not force adjustments. If a component is stuck, re-check the manual for correct procedure.
8. Specifications
| Model Number | GRS1005BK |
| Product Dimensions (Max) | 40 x 21.8 x 32.3 inches (Length x Width x Height) |
| Item Weight | 23.5 Pounds |
| Steering Wheel Tilt Adjustment | -15° to +15° |
| Steering Wheel Height Adjustment | 6.6 inches |
| Pedal Platform Angles | 12°, 16°, 20°, 24° |
| Shifter Mount | Left or Right side installation |
| Compatibility | Fanatec, Thrustmaster, Logitech, Moza, Simagic (wheels, pedals, shifters); PS5, PS4, Xbox, PC |
Figure 8.1.1: Detailed product dimensions for both unfolded and folded configurations.
9. Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official ARES WING website. Please have your model number (GRS1005BK) and purchase date available when contacting support.
