Introduction
This manual provides essential instructions for the safe and effective use of your ORGBRO Power Adapter, specifically designed for the Z1 Thermal Shipping Label Printer. Please read this manual thoroughly before using the product and retain it for future reference.
Safety Information
- Ensure the power adapter is used with the specified ORGBRO Z1 Thermal Shipping Label Printer only.
- Do not expose the adapter to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the adapter to severe impact.
- Do not attempt to open, modify, or repair the adapter. Refer all servicing to qualified personnel.
- Always unplug the adapter from the power outlet before cleaning or if it will be unused for an extended period.
- Keep out of reach of children.
Package Contents
Please check the package contents upon receipt. The package should contain:
- 1 x ORGBRO Power Adapter (for Z1 Thermal Shipping Label Printer)
Setup
- Identify the Adapter: Locate the ORGBRO Power Adapter. It features a standard AC plug on one end and a DC connector on the other.
- Connect to Printer: Insert the DC connector end of the power adapter firmly into the power input port on your ORGBRO Z1 Thermal Shipping Label Printer. Ensure a secure connection.
- Connect to Power Outlet: Plug the AC end of the power adapter into a standard electrical wall outlet (100-240V~50/60Hz).
- Verify Connection: Once connected, the printer should receive power, indicated by its power indicator light (refer to your Z1 printer manual for specific light behavior).
Image: The ORGBRO Power Adapter with its DC connector ready to be plugged into the Z1 Thermal Shipping Label Printer.
Operating Instructions
The ORGBRO Power Adapter is designed for continuous operation with your Z1 Thermal Shipping Label Printer. Once properly connected as described in the Setup section, the adapter will supply the necessary power to the printer.
- Ensure the printer's power switch is in the 'ON' position to begin operation.
- Always use the adapter in a well-ventilated area to prevent overheating.
- To power off the printer, first turn off the printer's power switch, then unplug the adapter from the wall outlet.
Maintenance
- Cleaning: Disconnect the adapter from both the printer and the power outlet. Use a soft, dry cloth to wipe the exterior of the adapter. Do not use liquid cleaners or sprays.
- Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid tightly coiling the cable to prevent damage.
- Inspection: Periodically inspect the power cord and adapter housing for any signs of damage, such as cuts, fraying, or cracks. If damage is found, discontinue use immediately and replace the adapter.
Troubleshooting
No Power to Printer
- Check Connections: Ensure the power adapter is securely plugged into both the Z1 printer and a working wall outlet.
- Test Outlet: Plug another device into the wall outlet to confirm it is supplying power.
- Inspect Adapter: Check the adapter cable and housing for any visible damage. If damaged, do not use.
- Printer Power Switch: Verify that the Z1 printer's power switch is in the 'ON' position.
If the issue persists after performing these checks, contact ORGBRO customer support for assistance.
Specifications
| Feature | Specification |
|---|---|
| Input Voltage | 100-240V~50/60Hz 1.5A |
| Output Voltage/Current | 24.0V-2.5A |
| Output Power | 60.0W |
| Color | Black |
| Item Weight | 7.1 ounces |
| Package Dimensions | 4.72 x 3.15 x 1.97 inches |
Warranty and Support
ORGBRO products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official ORGBRO website. If you encounter any issues or have questions about your ORGBRO Power Adapter, please contact ORGBRO customer support for assistance.
You can typically find contact information for support on the ORGBRO brand store page or through the retailer where the product was purchased.
