HJH55 Mattress Firm 600 and 3000 Series Adjustable Bed Base Remote Replacement User Manual

Introduction

This manual provides essential information for the HJH55 replacement remote control, designed for use with Mattress Firm 600 and 3000 Series Adjustable Bed Bases. This remote is an OEM direct replacement. Please ensure your existing remote matches the HJH55 model for proper compatibility and pairing. This remote does not come pre-paired and will require syncing with your adjustable bed base.

What's in the Box

• HJH55 Replacement Remote Control

Note: 2 AAA batteries are required for operation and are sold separately.

Setup

1. Battery Installation

1. Locate the battery compartment on the back of the remote control.
2. Slide open the battery cover.
3. Insert two (2) AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
4. Replace the battery cover securely.

2. Pairing the Remote Control

This replacement remote control does not come pre-paired with your adjustable bed base. You will need to sync it with your specific Mattress Firm 600 or 3000 Series Adjustable Bed Base.

Important: Refer to the original instruction manual for your Mattress Firm Adjustable Bed Base for detailed pairing instructions. The pairing process typically involves pressing a pairing button on the bed base's control box and then a specific button combination on the remote control within a short timeframe.

For additional support or to find a digital copy of your bed base manual, you may find information related to the UFRM standard or contact your bed base manufacturer.

Image: Back view of the HJH55 remote control. The label includes model information, FCC ID, and a QR code. The text "UFRM" is visible, indicating a potential standard or identifier for the remote's communication protocol.

Operating the Remote Control

The HJH55 remote control provides intuitive control over your adjustable bed base. Below is a description of each button's function:

Image: Front view of the HJH55 remote control, displaying all control buttons.

• TV: Adjusts the bed to a comfortable position for watching television.
• LOUNGE: Sets the bed to a relaxed lounge position.
• ZG (Zero Gravity): Moves the bed to the Zero Gravity position, which elevates the head and foot to relieve pressure.
• HEAD ▲ / ▼: Adjusts the head section of the bed up or down.
• FOOT ▲ / ▼: Adjusts the foot section of the bed up or down.
• M1 / M2: Programmable memory buttons. Press and hold to save your current favorite position. Press briefly to recall a saved position.
• FLAT: Returns the bed to a completely flat position.
• 10 MIN / 20 MIN: Timer buttons for massage or other timed functions (if supported by your bed base).
• HEAD (Wave Icon): Activates or adjusts the head massage function (if available on your bed base).
• FOOT (Wave Icon): Activates or adjusts the foot massage function (if available on your bed base).
• TIMER / ALL OFF: Turns off all active functions (e.g., massage, lights) or sets a general timer.
• Light Icon: Controls under-bed lighting or other integrated lights (if available on your bed base).
• MODE (Wave Icon): Cycles through different massage modes or intensity levels (if available on your bed base).

Maintenance

• Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new AAA batteries.
• Storage: Store the remote in a dry place, away from extreme temperatures and direct sunlight.

Troubleshooting

• Remote not responding:
  • Check if the batteries are inserted correctly and are not depleted. Replace if necessary.
  • Ensure there are no obstructions between the remote and the bed base's receiver.
  • Verify that the remote is the correct HJH55 model for your Mattress Firm 600/3000 Series bed base. Incompatible remotes will not pair.
• Remote not pairing:
  • Confirm you are following the specific pairing instructions provided in your original adjustable bed base manual.
  • Ensure the bed base is powered on and in pairing mode.
  • Try repeating the pairing process.
• Intermittent operation:
  • This could indicate low batteries. Replace them.
  • Ensure you are within the effective range of the bed base's receiver.

Specifications

Warranty and Support

For warranty information or technical support regarding your HJH55 replacement remote control, please contact the manufacturer, Richmat, or the retailer from whom you purchased the product. Keep your proof of purchase for any warranty claims.