Introduction
Thank you for choosing the LQHUE CQB-208 Portable Tire Inflator. This device is designed to provide convenient and efficient inflation for various items, including car tires, motorcycle tires, bicycle tires, and sports balls. Featuring a powerful 25000mAh battery, a digital display, and multiple inflation modes, it ensures accurate and fast inflation wherever you need it. Please read this manual thoroughly before use to ensure proper operation and to maximize the lifespan of your product.
Safety Information
WARNING: Failure to follow these safety instructions may result in electric shock, fire, or serious injury.
- Keep the device away from children.
- Do not operate the inflator in wet conditions or near flammable liquids or gases.
- Avoid prolonged continuous operation. Allow the device to cool down after 10-15 minutes of continuous use to prevent overheating.
- Always check the recommended pressure for the item you are inflating to avoid over-inflation, which can cause damage or injury.
- Do not point the air nozzle at people or animals.
- Store the device in a cool, dry place when not in use.
- Use only the provided charging cable and accessories.
- Do not disassemble, modify, or attempt to repair the device yourself. Contact customer support for assistance.
Package Contents
Verify that all items are present in your package:
- LQHUE CQB-208 Portable Tire Inflator
- Storage Bag
- User Manual
- Various Nozzles (Presta valve adapter, ball needle, swimming ring nozzle)
- Air Hose
- Type-C Charging Cable
- 3-meter Cigarette Lighter Power Cable

Product Overview
The LQHUE CQB-208 is a compact and powerful portable air compressor. Its intuitive design includes a clear LED display and easy-to-use controls.
Key Features:
- Digital LED Display: Shows real-time and preset pressure values.
- Multiple Inflation Modes: Pre-set modes for cars, motorcycles, bicycles, and balls.
- Auto-Shutoff: Automatically stops inflation once the target pressure is reached.
- High Capacity Battery: 25000mAh for extended use.
- Compact and Portable: Smaller than a mobile phone for easy carrying.
- Multi-functional: Includes power bank, emergency flashlight, and safety red light features.


Setup
1. Charging the Device
Before first use, fully charge the tire inflator. Connect the provided Type-C charging cable to the inflator's charging port and the other end to a 5V/2A USB power adapter (not included) or a car charger. The battery indicator on the display will show charging status. A full charge typically takes several hours.
2. Attaching the Air Hose and Nozzle
- Screw the air hose securely onto the inflator's air outlet port.
- Select the appropriate nozzle for the item you wish to inflate.
- Screw the selected nozzle onto the free end of the air hose.
Operating Instructions
1. Power On/Off
- Power On: Press and hold the power button for 2-3 seconds. The display will light up.
- Power Off: Press and hold the power button for 2-3 seconds. The device will automatically power off after a period of inactivity.
2. Select Inflation Mode
After powering on, press the 'M' button to cycle through the available inflation modes:
- Car Mode: Default pressure range 26-50 PSI.
- Motorcycle Mode: Default pressure range 26-45 PSI.
- Bicycle Mode: Default pressure range 30-65 PSI.
- Ball Mode: Default pressure range 4-16 PSI.
- Manual Mode: Allows custom pressure settings from 3-180 PSI.

3. Set Target Pressure
Once a mode is selected, the preset pressure will flash. Use the '+' and '-' buttons to adjust the target pressure. Press the 'M' button briefly to confirm the setting or wait a few seconds for it to set automatically.
4. Connect to Item and Start Inflation
- Connect the nozzle firmly to the valve stem of the item you wish to inflate. The display will show the current pressure.
- Press the power button (start/stop button) to begin inflation.
- The inflator will automatically stop once the preset target pressure is reached.
- Disconnect the nozzle from the valve stem.

5. Change Pressure Unit
While the device is on, press the unit button (often integrated with the 'M' button or a dedicated button) to switch between PSI, BAR, KPA, and KG/CM².
Versatile Utility Functions
The LQHUE CQB-208 offers additional features for convenience and emergencies:
- Power Bank Feature: The built-in 25000mAh battery can be used to charge other electronic devices via the USB output port (5V/2A). Connect your device using a compatible USB cable.
- Emergency Flashlight: Press the flashlight button (often a dedicated button or a long press of the power button) to turn on the LED flashlight for illumination in dark environments.
- Safety Red Light: Some models include a safety red light or flashing red light mode, activated by pressing the flashlight button again, for roadside emergencies or signaling.


Maintenance
1. Cleaning
Wipe the exterior of the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the device is powered off and disconnected from any power source before cleaning.
2. Storage
Store the inflator and its accessories in the provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures. For long-term storage, charge the battery to approximately 50-70% every 3-6 months to maintain battery health.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Low battery. | Charge the device fully. |
| Inflator not inflating. | Hose not securely connected. Nozzle not properly attached to valve. Target pressure already reached. | Ensure all connections are tight. Check the target pressure setting. |
| Inaccurate pressure reading. | Loose connection. Unit setting incorrect. | Ensure the nozzle is firmly attached. Verify the pressure unit (PSI, BAR, etc.). |
| Device overheats and shuts off. | Prolonged continuous use. | Allow the device to cool down for at least 15-20 minutes before resuming operation. |
Specifications
| Feature | Specification |
|---|---|
| Brand | LQHUE |
| Model Name | CQB-208 |
| Max Pressure | 180 PSI |
| Battery Capacity | 25000mAh |
| Input Voltage | 5 Volts |
| Power Source | Battery Powered |
| Recommended Uses | Tire Inflation (Cars, Motorcycles, Bicycles, Balls) |
| Noise Level | 1 Decibels (Note: This value seems unusually low and may refer to standby noise. Actual operating noise will be higher.) |
| Included Components | Portable inflator, various nozzles, air hose, Type-C cable, cigarette lighter cable, storage bag, user manual |
| UPC | 792864647339 |
Warranty and Support
LQHUE products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided on the product packaging or the official LQHUE website. Keep your purchase receipt as proof of purchase.