1. Introduction
This manual provides detailed instructions for the safe and effective use of your VOOPOO Vinci Spark 220 Mod. Please read this manual thoroughly before operating the device to ensure proper function and to prevent damage or injury. The Vinci Spark 220 Mod is a high-performance electronic cigarette device designed for experienced users. It requires external 18650 batteries and a compatible tank and coils, which are not included with this product.
Note: This product does not contain nicotine, tobacco, or e-liquid. It is intended for use with nicotine-free e-liquids only.
2. Package Contents
Please check the package for the following items:
- 1 x VOOPOO Vinci Spark 220 Device (Mod only)
- 1 x Type-C USB Cable
- 1 x User Manual
Note: External 18650 batteries, tank, and coils are not included and must be purchased separately.
3. Product Overview
The VOOPOO Vinci Spark 220 Mod features an innovative all-metal design, offering a compact and lightweight form factor. It supports dual external 18650 batteries and delivers up to 220W of power. The device includes a 1.47-inch TFT screen and a multifunctional wheel button for intuitive control.
Image 3.1: VOOPOO Vinci Spark 220 Mod, showcasing its design and available colors.
Image 3.2: Key features of the Vinci Spark 220 Mod, including its 108g weight, 1.47-inch TFT screen, and high display resolution.
Key Components:
- 510 Connector: For attaching compatible tanks.
- Multifunctional Wheel Button: For power, wattage adjustment, and menu navigation.
- 1.47'' TFT Screen: Displays device information.
- Battery Compartment: Houses dual 18650 batteries.
- Type-C USB Port: For charging and firmware updates.
- Power & Function Lock Switch: For securing the device.
4. Setup
4.1 Battery Installation
- Ensure the device is powered off.
- Locate the easy-to-clip battery cover on the side of the device.
- Open the battery cover.
- Insert two external 18650 batteries according to the correct polarity markings (+ and -) inside the compartment. Incorrect installation can damage the device.
- Close the battery cover securely until it clicks into place.
Image 4.1: Illustration of the battery compartment and the multifunctional wheel button.
4.2 Initial Charging
Although the device supports 5V/3A fast charging, it is recommended to charge external 18650 batteries using a dedicated external battery charger for optimal battery life and safety. If using the device's Type-C port:
- Connect the Type-C USB cable to the charging port on the device.
- Connect the other end of the cable to a suitable 5V/3A power adapter (not included).
- The screen will display the charging status.
- Disconnect the device once fully charged.
4.3 Tank and Coil Installation (Not Included)
The Vinci Spark 220 Mod is compatible with the Uforce-X Tank (PnP X) and all PnP X Coils. Refer to the specific tank and coil manual for installation instructions. Ensure the tank is securely screwed onto the 510 connector of the mod.
5. Operation
5.1 Power On/Off
- Power On: Press the fire button 5 times rapidly within 2 seconds.
- Power Off: Press the fire button 5 times rapidly within 2 seconds. Alternatively, use the dedicated Power & Function Lock Switch for quick power off and locking.
5.2 Mode Selection
The device supports three setting modes: Smart, RBA, and TC-TCR Mode. Navigate through the menu using the multifunctional wheel button to select your desired mode.
- Smart Mode: Automatically detects coil resistance and sets an appropriate wattage, preventing accidental coil burnout.
- RBA Mode: Allows full wattage control for advanced users and rebuildable atomizers.
- TC-TCR Mode: Temperature Control mode for specific coil materials (e.g., Stainless Steel, Titanium, Nickel).
5.3 Wattage Adjustment
Use the multifunctional wheel button to adjust the wattage. Rotate the wheel clockwise to increase wattage and counter-clockwise to decrease it. The wattage range is 5-220W.
5.4 Screen Interface
The 1.47-inch TFT screen displays essential information such as current wattage, battery level, coil resistance, voltage, and puff count. The device offers 3 interface themes for customization.
5.5 Lock/Unlock Function
The dedicated Power & Function Lock Switch allows you to quickly lock or unlock the device, preventing accidental firing or setting changes during transport.
6. Maintenance
6.1 Cleaning the Device
- Regularly wipe the device with a dry, soft cloth to remove dust and fingerprints.
- Clean the 510 connector area with a cotton swab to ensure good conductivity between the mod and the tank.
- Avoid using harsh chemicals or abrasive materials, as these can damage the finish.
6.2 Battery Care
- Always use high-quality 18650 batteries from reputable brands.
- Inspect battery wraps for damage regularly. Replace damaged batteries immediately.
- Store spare batteries in protective cases.
- Do not expose batteries to extreme temperatures or direct sunlight.
7. Troubleshooting
If you encounter issues with your Vinci Spark 220 Mod, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on | Low battery, incorrect battery installation, device locked. | Charge batteries, re-install batteries with correct polarity, unlock device using the switch or 5 clicks. |
| "Atomizer Short" or "No Atomizer" message | Tank not connected, faulty coil, short circuit in tank. | Ensure tank is securely attached, replace coil, clean 510 connector. |
| Weak vapor production | Low wattage, low battery, old coil. | Increase wattage, charge batteries, replace coil. |
| Device not charging | Faulty cable, power adapter, or charging port. | Try a different Type-C cable and power adapter. Ensure port is clean. Consider external battery charger. |
If the problem persists, please contact VOOPOO customer support.
8. Specifications
Technical specifications for the VOOPOO Vinci Spark 220 Mod:
- Brand: VOOPOO
- Product Name: Vinci Spark 220 Mod
- Battery: Dual external 18650 batteries (not included)
- Power Range: 5-220W
- Output Voltage: 3.2-4.2V
- Charging: Type-C 5V/3A
- Screen: 1.47'' TFT
- Resistance Range: 0.1-3.0Ω
- Compatible Tank: Uforce-X Tank (PnP X)
- Compatible Coils: All PnP X Coils
- Material: Aluminium alloy
- Product Dimensions: 45 x 29 x 95 mm (approx. 4.5 x 2.9 x 9.5 cm)
- Weight: 340 g (with packaging, device weight is approx. 108g)
Image 8.1: Features of compatible Uforce-X Tank and PnP X Coils, including top airflow, slide-to-fill mechanism, and coil compatibility for rich flavor. Note: Tank and coils are sold separately.
Image 8.2: Overview of available colors and a summary of key specifications for the Vinci Spark 220 Mod.
9. Safety Information
Please observe the following safety precautions:
- Keep the device away from water and other liquids.
- Do not expose the device to extreme temperatures or direct sunlight.
- Do not drop, puncture, or disassemble the device.
- Use only the recommended external 18650 batteries and ensure they are in good condition.
- Charge the device on a fire-proof surface and never leave it unattended while charging.
- Keep out of reach of children and pets.
- This product is intended for adult users only.
- This product does not contain nicotine and is intended for use with nicotine-free e-liquids.
10. Warranty and Support
VOOPOO products come with a limited warranty. Please refer to the warranty card included in your package or visit the official VOOPOO website for detailed warranty terms and conditions.
For technical support, troubleshooting assistance, or any other inquiries, please contact VOOPOO customer service through their official website or the retailer where you purchased the product.
