1. Product Overview
The Peanuts Ambient Light Projection Alarm Clock (Model: PNPROJCLK01-MFN) is a USB-powered device designed to display time and project a soft, ambient light featuring Snoopy. It includes a multi-alarm function to assist with daily scheduling.
Figure 1: Front view of the Peanuts Ambient Light Projection Alarm Clock, showing the digital time display and the projected Snoopy image.
Key Features:
- Digital Time Display: Clear LED display for current time.
- Ambient Projection Light: Projects Snoopy images onto a surface.
- Multi-Alarm Function: Allows setting multiple alarms.
- USB-Powered: Operates via a standard USB power source.
- Compact Design: Suitable for various spaces like bedrooms or study rooms.
2. Setup Instructions
2.1 Unpacking
Carefully remove the alarm clock and all accessories from the packaging. Ensure all components are present:
- Peanuts Ambient Light Projection Alarm Clock
- USB Power Cable
- User Manual (this document)
2.2 Power Connection
- Locate the USB power port on the back of the alarm clock.
- Insert the small end of the provided USB power cable into the clock's USB port.
- Plug the larger end of the USB power cable into a compatible USB power adapter (not included) or a powered USB port.
- The clock display will illuminate, indicating power is connected.
Note: This device is USB-powered and does not use batteries for operation or power backup. In case of a power outage, the time and alarm settings will need to be reset.
3. Operating Instructions
3.1 Setting the Time
- Press and hold the SET button (location may vary, typically on the back or bottom) until the hour digits begin to flash.
- Use the UP and DOWN buttons (or similar labeled buttons) to adjust the hour.
- Press SET again to move to the minute digits.
- Use the UP and DOWN buttons to adjust the minutes.
- Press SET one more time to confirm the time and exit setting mode.
3.2 Setting Alarms
The clock supports multiple alarms. Refer to the specific button labels on your device for "Alarm 1", "Alarm 2", etc.
- Press the ALARM button (or ALARM 1) once to display the current alarm time.
- Press and hold the ALARM button until the alarm hour digits flash.
- Use the UP and DOWN buttons to set the desired alarm hour.
- Press ALARM again to move to the alarm minute digits.
- Use the UP and DOWN buttons to set the desired alarm minutes.
- Press ALARM one more time to confirm and activate the alarm. An alarm icon should appear on the display.
- To set additional alarms, repeat the process using the corresponding alarm buttons if available.
- To deactivate an alarm, press the ALARM button repeatedly until the alarm icon disappears.
3.3 Using the Projection Light
The projection light can be activated to display Snoopy images on a ceiling or wall.
- Press the PROJECTION button (or similar, e.g., LIGHT) to turn the projection on or off.
- Adjust the angle of the projector lens (if adjustable) to optimize the image clarity and position on your desired surface.
- For best visibility, ensure the room is dark.
Figure 2: The alarm clock projecting a Snoopy image onto a wall in a dimly lit room.
3.4 Snooze Function
When an alarm sounds:
- Press the SNOOZE button (usually a large button on top) to temporarily silence the alarm. The alarm will sound again after a few minutes (default snooze time).
- To turn off the alarm completely, press any other button on the clock.
4. Maintenance
4.1 Cleaning
- Ensure the device is unplugged from the power source before cleaning.
- Wipe the exterior of the clock with a soft, dry, or slightly damp cloth.
- Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the surface.
- Avoid getting moisture into any openings.
4.2 Storage
When not in use for extended periods, store the clock in a cool, dry place, away from direct sunlight and extreme temperatures.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock display is off. | No power or loose connection. | Ensure the USB cable is securely plugged into both the clock and a powered USB adapter/port. Check if the power outlet is functional. |
| Projection image is dim or unclear. | Room is too bright; incorrect projection distance/angle. | Use the projection feature in a darker room. Adjust the clock's position or the projector lens angle for optimal clarity. |
| Alarm does not sound. | Alarm not set or deactivated; power interruption. | Verify that the alarm is set and the alarm icon is visible on the display. If power was interrupted, reset the time and alarm. |
| Time needs frequent resetting. | Frequent power interruptions. | This clock does not have battery backup. Time will need to be reset after any power loss. Consider connecting to a more stable power source if possible. |
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Peanuts |
| Model Number | PNPROJCLK01-MFN |
| Display Type | Digital |
| Power Source | Corded Electric (USB) |
| Product Dimensions | 4"W x 3.5"H |
| Material Type | Plastic |
| Alarm Clock Function | Yes |
| Special Feature | Projection Clock |
| Batteries Included | No |
7. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact the manufacturer, Southern Telecom, directly. Keep your proof of purchase for warranty claims.
Manufacturer: Southern Telecom