Introduction
The KIIROO Feel Rachel Starr Stroker is a personal pleasure device designed to provide realistic sensations. It is crafted from body-safe, skin-like material with a unique internal texture. This device is compatible with KIIROO's KEON and PowerBlow systems for enhanced interactive experiences.

Image: The KIIROO Feel Rachel Starr Stroker, highlighting its pleasurable nodules, body-safe material, and compatibility with PowerBlow and KEON.

Image: Rachel Starr presented with the KIIROO Feel Rachel Starr Stroker.
Setup
- Unpack: Carefully remove the Feel Rachel Starr Stroker from its packaging.
- Inspect: Examine the device for any visible damage or defects. If any are found, do not use the product and contact customer support.
- Initial Cleaning: Before first use, clean the device thoroughly according to the maintenance instructions provided in this manual.
- Lubrication: Apply a generous amount of water-based lubricant to the entrance and internal texture of the stroker. Ensure the lubricant is compatible with TPE materials.
- Optional KEON/PowerBlow Connection: If using with a KIIROO KEON or PowerBlow device, refer to the respective manual for those devices for proper attachment and synchronization.

Image: A detailed view of the Feel Rachel Starr Stroker's opening, showing the realistic texture.
Operating Instructions
- Preparation: Ensure the device is clean and adequately lubricated with a water-based lubricant.
- Usage: Gently insert and use the stroker as desired.
- Interactive Use (with KEON/PowerBlow):
- Connect the Feel Rachel Starr Stroker to your KEON or PowerBlow device as per their instructions.
- Utilize the FeelMe AI application or compatible interactive content to synchronize the experience.
- Ensure both the stroker and the interactive device are securely connected and powered on.
- Post-Use: After each use, proceed with the cleaning and maintenance steps.

Image: Visual representation of the stroker's interactive capabilities with KEON and PowerBlow, including connections to videos, VR, and webcam performers.

Image: The FeelMe AI system in use with a KEON device and the Feel Rachel Starr Stroker, demonstrating interactive content synchronization.
Maintenance
Proper cleaning and maintenance are essential for hygiene and to prolong the lifespan of your Feel Rachel Starr Stroker.
- Immediate Cleaning: Clean the device immediately after each use.
- Washing: Use warm water and a mild, toy-safe soap. Gently clean both the exterior and interior of the stroker. Avoid harsh chemicals or abrasive cleaners.
- Rinsing: Rinse the device thoroughly under running water to remove all soap residue.
- Drying: Allow the device to air dry completely. You may gently pat the exterior with a lint-free cloth. Ensure the interior is fully dry to prevent bacterial growth.
- Storage: Store the dry device in a clean, dust-free environment, away from direct sunlight and extreme temperatures. Avoid storing with other toys made of different materials, especially silicone, to prevent material degradation.
Troubleshooting
- Issue: Device feels too tight or difficult to insert.
Solution: Ensure ample water-based lubricant is applied to both the device and yourself. Some users find the device to be very tight initially and may require more lubricant. - Issue: Device material shows signs of tearing or damage.
Solution: Inspect the device regularly for wear. Avoid excessive force during use or cleaning. This product is made from Thermoplastic Elastomer (TPE), which can be susceptible to tearing if not handled carefully or if exposed to oil-based lubricants. Discontinue use if significant damage occurs. - Issue: Sleeve retracts into the case during use.
Solution: Ensure the sleeve is properly seated within its casing. If using with an external device like KEON or PowerBlow, ensure it is correctly attached according to their instructions. - Issue: Device does not feel as realistic as expected.
Solution: Experiment with different amounts and types of water-based lubricant. Ensure the device is at a comfortable temperature for use.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 21014 |
| Brand | KIIROO |
| Style | Rachel Starr |
| Material | Acrylonitrile Butadiene Styrene (ABS), PC, Thermoplastic Elastomer (TPE) |
| Color | Vanilla |
| Water Resistance Level | Waterproof |
| Package Dimensions | 10.28 x 3.66 x 3.66 inches |
| Item Weight | 1.76 Pounds |
| Optimal Diameter | 0.7 inch to 1.7 inch (2 cm to 4.5 cm) |
| Total Length | 8.6 inch (22 cm) |
| Tightest Diameter | 0.2 inch (0.6 cm) |
| Largest Diameter | 0.9 inch (2.4 cm) |
| Opening Slit Height | 1.06 inch (2.7 cm) |

Image: Internal diagram illustrating the dimensions and textured tunnel of the Feel Rachel Starr Stroker.
Warranty Information
Specific warranty details for the KIIROO Feel Rachel Starr Stroker are not provided in this manual. For comprehensive warranty information, please refer to the official KIIROO website or contact their customer support directly. It is recommended to retain your proof of purchase for any warranty claims.
Customer Support
For further assistance, product inquiries, or technical support, please visit the official KIIROO website or contact their customer service department.
KIIROO Official Store: KIIROO Store on Amazon