Introduction
Thank you for choosing the maylit Under Cabinet Strip Lighting. This LED light bar provides ultra-bright 6000K cool white illumination, designed for various indoor applications such as kitchen cabinets, counters, workbenches, desks, closets, and shelves. Its plug-in design and convenient on/off switch ensure ease of use and installation. Please read this manual thoroughly before installation and operation to ensure safe and optimal performance.
Package Contents
Please verify that all items listed below are included in your package:
- 1 x 24in Plug-in Light Strip with On/Off Switch
- 4 x Light Strip Buckles
- 8 x Screws
- 5 x Wire Buckles
- 1 x On/Off Button Adhesive Pad
- 1 x User Manual
Figure 1: Included Components
Key Features
- Super-Bright Illumination: Emits intense 6000K cool white light, providing excellent visibility for various tasks.
- Convenient On/Off Switch: Easily control the lighting without unplugging the device. Note: Brightness adjustment is not supported.
- Effortless Plug-and-Play Operation: Simple setup requiring no complex wiring or technical skills.
- Versatile and Easy Installation: Offers both adhesive-backed installation for quick setup and screw-mount option for a more permanent fix.
- Wide Range of Application: Ideal for kitchens, closets, pantries, stairs, workbenches, desks, and shelves.
Figure 2: High Color Rendering Index (CRI) for accurate color perception.
Safety Information
- Ensure the power supply is disconnected before installation or maintenance.
- This product is designed for indoor use only. Do not expose to water or high humidity.
- Do not attempt to modify or repair the light strip. Refer to qualified personnel for service.
- Keep out of reach of children.
- Avoid direct eye exposure to the LED light.
Setup and Installation
Follow these steps to install your maylit Under Cabinet Strip Lighting:
- Plan Placement: Determine the desired location for your light strip. Ensure the surface is clean, dry, and smooth for optimal adhesion.
- Choose Installation Method:
- Adhesive Mount: For a quick and damage-free setup, peel off the protective backing from the light strip and firmly press it onto the desired surface.
- Screw Mount (Recommended for permanent fix): Use the provided light strip buckles and screws. Mark the positions for the buckles, drill pilot holes if necessary, and secure the buckles with screws. Then, snap the light strip into the buckles.
- Secure Wiring: Use the included wire buckles to neatly route and secure the power cable, preventing it from hanging loosely.
- Connect Power: Plug the light strip's power cord into a standard 110V-120V electrical outlet.
- Test Functionality: Use the integrated on/off switch to turn the light strip on and off.
Figure 3: Installation Methods
Video 1: Demonstration of the plug-in LED strip lights and their installation process.
Operating Instructions
The maylit Under Cabinet Strip Lighting is designed for simple operation:
- Once installed and plugged into a power outlet, locate the in-line on/off switch on the power cord.
- Toggle the switch to the 'ON' position to illuminate the LED strip.
- Toggle the switch to the 'OFF' position to turn off the LED strip.
This light strip provides a fixed 6000K cool white light and does not support brightness adjustment or color changes.
Figure 4: On/Off Switch for easy control.
Maintenance
To ensure the longevity and optimal performance of your light strip:
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the surface of the light strip. Do not use abrasive cleaners or solvents.
- Inspection: Periodically check the power cord and light strip for any signs of damage. If damage is found, discontinue use and contact customer support.
- Storage: If storing the light strip for an extended period, ensure it is clean and dry, then store it in a cool, dry place away from direct sunlight.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light strip does not turn on. | No power supply. Switch is off. Faulty connection. | Ensure the power plug is securely inserted into a working outlet. Toggle the on/off switch to the 'ON' position. Check all connections to ensure they are firm. |
| Light is dim or flickers. | Unstable power supply. Damaged light strip. | Try plugging into a different outlet. If the issue persists, the light strip may be damaged. Contact customer support. |
| Adhesive is not holding. | Surface not clean/dry. Insufficient pressure during installation. | Clean and dry the surface thoroughly before re-applying. Apply firm, even pressure across the entire length of the strip during installation. Consider using the screw mount option for a more secure hold. |
Specifications
| Feature | Detail |
|---|---|
| Brand | maylit |
| Model Number | 24in-6000k |
| Color Temperature | 6000 Kelvin (Cool White) |
| Item Length | 24 Inches |
| Light Source Type | LED |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
| Wattage | 7.2 watts |
| Luminous Flux | 960 Lumen |
| Special Feature | On/Off Switch |
| Indoor/Outdoor Usage | Indoor |
| Material | PCB+LED |
| Item Weight | 4.2 ounces |
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact maylit customer service directly. Keep your purchase receipt for any warranty claims.
