TOTAL TGSLI2085 Cordless Electric Chainsaw User Manual

1. Introduction

Thank you for choosing the TOTAL TGSLI2085 Cordless Electric Chainsaw. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and keep it for future reference. This chainsaw is part of the TOTAL P20S system, designed for versatility and performance in various cutting tasks.

2. Safety Instructions

WARNING: Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

• Always wear appropriate personal protective equipment (PPE) including safety glasses, hearing protection, gloves, and sturdy footwear.
• Ensure the work area is clear of obstacles, well-lit, and free from bystanders.
• Do not operate the chainsaw in wet conditions or in the presence of flammable liquids or gases.
• Keep hands and feet away from the cutting chain when the tool is running.
• Always hold the chainsaw firmly with both hands.
• Be aware of kickback and how to avoid it.
• Disconnect the battery pack before making any adjustments, changing accessories, or storing the tool.
• Use only TOTAL P20S series batteries and chargers with this tool.
• Store the chainsaw in a dry, secure place out of reach of children.

3. Product Overview

The TOTAL TGSLI2085 Cordless Electric Chainsaw is designed for efficient cutting with its brushless motor and durable construction. Below are key components and visual references.

Figure 3.1: Front view of the TOTAL TGSLI2085 Cordless Electric Chainsaw, showcasing the bar, chain, handle, and motor housing. The tool features a teal and grey color scheme with "TOTAL" branding on the bar.

Figure 3.2: Side view of the TOTAL TGSLI2085 Cordless Electric Chainsaw, highlighting its compatibility with the P20S battery system (battery and charger sold separately). The image also indicates an 8-inch bar and a chain speed of 7.5 m/s.

Key Components:

• Guide Bar: The metal bar that guides the cutting chain. (20 cm / 8 inches)
• Cutting Chain: The chain with cutting teeth that rotates around the guide bar.
• Front Handle: For stable two-hand operation.
• Rear Handle: With trigger switch and safety lock-off.
• Chain Brake/Hand Guard: Safety feature to stop the chain and protect the hand.
• Oil Tank Cap: For manual chain lubrication.
• Chain Tensioning Mechanism: For adjusting chain tightness.
• Battery Compartment: For inserting the P20S battery (battery not included).

4. Setup

4.1. Unpacking

Carefully remove the chainsaw and all accessories from the packaging. Inspect for any damage. The package should include the chainsaw unit and a protective case. Battery and charger are sold separately.

4.2. Guide Bar and Chain Installation (if not pre-assembled)

1. Ensure the battery is removed from the tool.
2. Remove the chain cover by loosening the retaining nuts.
3. Place the chain around the guide bar, ensuring the cutting edges are facing the correct direction (refer to chain direction indicator on the bar).
4. Fit the guide bar onto the chainsaw studs, ensuring the chain engages with the drive sprocket.
5. Replace the chain cover and hand-tighten the retaining nuts. Do not fully tighten yet.

4.3. Chain Tensioning

Proper chain tension is crucial for safe and efficient operation. The chain should be snug against the guide bar but still able to be pulled around by hand. There should be no sag on the underside of the bar.

1. With the chain cover nuts slightly loose, use the manual chain tensioning mechanism to adjust the chain tension.
2. Once the correct tension is achieved, fully tighten the chain cover retaining nuts.
3. Check tension again after tightening.

4.4. Lubrication

This chainsaw features manual chain lubrication. Before each use, apply appropriate chain oil to the guide bar groove and chain links. Regular lubrication is vital for chain life and cutting performance.

4.5. Battery Installation

Insert a fully charged TOTAL P20S battery pack into the battery compartment until it clicks securely into place.

5. Operating

5.1. Starting the Chainsaw

1. Ensure you are wearing all necessary PPE.
2. Hold the chainsaw firmly with both hands, one on the front handle and one on the rear handle.
3. Engage the safety lock-off button (usually located near the trigger).
4. Press the trigger switch to start the chainsaw. The chain will begin to rotate.

5.2. Cutting Techniques

• Always maintain a firm grip and balanced stance.
• Allow the chain to reach full speed before beginning a cut.
• Apply light pressure; let the chainsaw do the work.
• Be aware of the wood's tension to avoid pinching the bar or causing kickback.
• For larger branches, make an undercut first to prevent splintering.

5.3. Stopping the Chainsaw

Release the trigger switch. The chain will stop rotating. For extended breaks or storage, remove the battery pack.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your chainsaw.

6.1. Chain Lubrication

Manually lubricate the chain and guide bar frequently during operation, especially during prolonged use. This reduces friction, heat, and wear on the chain and bar.

6.2. Chain Sharpening

A sharp chain is essential for safe and efficient cutting. Sharpen the chain regularly or replace it when dull. Refer to a professional or specific chain sharpening instructions if unsure.

6.3. Chain Tension Check

Check chain tension before each use and periodically during operation. A loose chain can derail, and an overly tight chain can cause excessive wear and reduce performance.

6.4. Cleaning

After each use, remove the battery and clean the chainsaw. Remove sawdust, chips, and debris from the guide bar groove, chain, and motor housing vents. Use a soft brush or compressed air. Do not use water or solvents.

6.5. Storage

Store the chainsaw in its protective case in a dry, secure location, out of reach of children. Ensure the battery is removed before storage.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official TOTAL website. Keep your proof of purchase for any warranty claims.

For technical assistance or spare parts, please contact TOTAL customer service through their official channels.