ECOXGEAR EcoExplorer XL User Manual

Introduction

Welcome to the ECOXGEAR EcoExplorer XL user manual. This guide provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your new portable Bluetooth speaker. The EcoExplorer XL is designed for both indoor and outdoor use, featuring powerful audio, party lights, and IPX5 waterproofing.

Please read this manual thoroughly before using your speaker to ensure proper operation and to maximize its lifespan.

What's in the Box

Verify that all items are present in your package:

• 1x EcoExplorer XL Speaker
• 1x 3FT USB TYPE-C Charging Cable
• 1x 3FT Aux-In Audio Cable
• User Guide (this manual)

Image: The EcoExplorer XL speaker shown with its USB-C charging cable and Aux-In cable.

Product Overview

Controls and Ports

Familiarize yourself with the various controls and connection ports on your EcoExplorer XL speaker.

Image: Top panel of the EcoExplorer XL speaker, displaying the control buttons for power, Bluetooth, volume, EQ, and party lights.

• Power Button: Turns the speaker on or off.
• Bluetooth Button: Initiates Bluetooth pairing mode.
• Volume Up/Down Buttons: Adjusts the speaker's output volume.
• Play/Pause Button: Controls audio playback.
• EQ Button: Cycles through different equalizer presets.
• Party Lights Button: Changes or disables the LED lighting effects.
• Echo +/- Buttons: Adjusts microphone echo effect (for external microphone).
• Microphone Volume +/- Buttons: Adjusts external microphone volume.

Image: A close-up view of the ECOXGEAR logo and the sealed port cover, which protects the charging and audio input ports from water.

The sealed port cover on the back of the speaker protects the USB-C charging port, 3.5mm Aux-In port, and 6.35mm microphone jack.

Setup

1. Charging the Speaker

Before first use, fully charge the EcoExplorer XL. A full charge takes approximately 4.5 hours.

1. Open the sealed port cover on the back of the speaker.
2. Connect the included USB TYPE-C charging cable to the speaker's USB-C port.
3. Connect the other end of the USB cable to a compatible USB power adapter (not included) or a powered USB port.
4. The charging indicator light will show the charging status. Once fully charged, the light will change or turn off.

2. Power On/Off

• To power on, press and hold the Power Button until you hear an audible confirmation.
• To power off, press and hold the Power Button again until the speaker shuts down.

3. Bluetooth Pairing

Connect your EcoExplorer XL to a Bluetooth-enabled device (e.g., smartphone, tablet) for wireless audio streaming.

1. Ensure the speaker is powered on.
2. Press the Bluetooth Button on the speaker. The Bluetooth indicator light will flash, indicating it's in pairing mode.
3. On your device, go to Bluetooth settings and search for available devices.
4. Select "ECOXGEAR EcoExplorer XL" from the list.
5. Once connected, the Bluetooth indicator light on the speaker will become solid, and you will hear a confirmation tone.

The speaker supports Bluetooth 5.3 and can maintain a connection up to 100 feet away.

4. Aux-In Connection

For devices without Bluetooth, use the included 3.5mm Aux-In cable.

1. Open the sealed port cover.
2. Connect one end of the 3.5mm Aux-In cable to the speaker's Aux-In port.
3. Connect the other end to the headphone jack or audio output of your device.
4. The speaker will automatically switch to Aux-In mode.

5. Microphone Connection (Optional)

An external 6.35mm microphone (sold separately) can be connected for PA use or karaoke.

1. Open the sealed port cover.
2. Insert the microphone's 6.35mm jack into the speaker's microphone input.
3. Adjust microphone volume using the Microphone Volume +/- Buttons and echo effect using the Echo +/- Buttons.

Operating Instructions

Audio Playback

• Volume Control: Use the Volume Up/Down Buttons on the speaker or your connected device to adjust the audio level.
• Play/Pause: Press the Play/Pause Button to start or stop audio playback.
• Track Navigation: (If supported by your device and connection type) Use your connected device to skip tracks.

EQ Presets

The EcoExplorer XL features three built-in EQ presets to optimize sound for different environments:

• Press the EQ Button to cycle through the presets.
• Maximum Bass: Enhances low frequencies for a powerful bass response.
• Warmer Profile: Ideal for indoor listening, providing a balanced and rich sound.
• High Frequency Profile: Maximizes decibel levels for loud outdoor playback.

Party Lights

The speaker includes multi-pattern front flashing adjustable LED lighting effects.

Image: The EcoExplorer XL speaker displaying its dynamic, multi-color LED party lights around the speaker grille.

• Press the Party Lights Button to cycle through the 6 different light modes.
• Continue pressing to turn the lights off.

Wireless Pairing Mode (Stereo Pairing)

Wirelessly pair two EcoExplorer XL speakers together for a true stereo sound experience.

1. Ensure both EcoExplorer XL speakers are powered on and not connected to any Bluetooth devices.
2. On one speaker (this will be your primary speaker), press and hold the Bluetooth Button until you hear a specific pairing tone.
3. On the second speaker, press the Bluetooth Button briefly.
4. The speakers will attempt to connect to each other. Once successfully paired, you will hear a confirmation tone, and the Bluetooth indicator lights on both speakers will become solid.
5. Now, connect your device to the primary speaker via Bluetooth as described in the "Bluetooth Pairing" section. Audio will play through both speakers in stereo.

Maintenance

Cleaning

To clean your EcoExplorer XL, use a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the speaker's finish or components.

Waterproofing (IPX5)

The EcoExplorer XL is rated IPX5 waterproof, meaning it is protected against low-pressure water jets from any direction. This makes it suitable for use in environments where it might encounter splashes, rain, or light spray.

Image: The EcoExplorer XL speaker positioned near the edge of a swimming pool, illustrating its IPX5 waterproof rating against splashes.

Important:

• Ensure the sealed port cover on the back of the speaker is securely closed before exposing the speaker to water.
• The speaker is not designed to float or be submerged in water. Submerging the speaker will cause damage and void the warranty.

Battery Care

To prolong the life of the built-in lithium-ion battery:

• Avoid fully discharging the battery frequently.
• Store the speaker in a cool, dry place when not in use for extended periods.
• Recharge the battery at least once every 3-6 months if stored for a long time.

Troubleshooting

Specifications

Warranty and Support

Warranty Information

The ECOXGEAR EcoExplorer XL comes with a 1-Year Manufacturer Warranty. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or submersion in water.

Please retain your proof of purchase for warranty claims.

Customer Support

For technical assistance, warranty claims, or further inquiries, please contact ECOXGEAR customer support:

• Website: www.ecoxgear.com
• Refer to the ECOXGEAR website for the most up-to-date contact information and support resources.