1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your HOCANFLO 750W Macerator Pump. Please read this manual thoroughly before installation and use to ensure safe and efficient operation and to prevent damage to the unit or property. Keep this manual for future reference.

Image 1.1: HOCANFLO 750W Macerator Pump overview, highlighting its powerful upflush capabilities and key features.
2. Safety Information
Adherence to the following safety guidelines is crucial for preventing personal injury and equipment damage:
- Always disconnect the power supply to the pump before performing any installation, maintenance, or troubleshooting procedures.
- Ensure the pump is properly grounded to prevent electrical shock.
- Do not operate the pump with flammable liquids or in environments containing explosive gases.
- Professional plumbing and electrical installation is highly recommended to ensure compliance with local codes and safe operation.
- Do not allow children to operate or play near the pump.
- Ensure all connections are secure and watertight to prevent leaks.
3. Product Components
The HOCANFLO 750W Macerator Pump package includes the following items:
- HOCANFLO 750W Macerator Pump Unit
- Three (3) Universal Adapter Rings for standard pipe connections
- One (1) 10-foot GFCI-protected power cord
- One (1) Elbow with built-in check valve
- One (1) Rubber ring
- One (1) Hose
- One (1) Stopper
- Assorted Clamps (90-100mm and others)
- Multilingual Installation Manual

Image 3.1: Product dimensions and included accessories for the HOCANFLO 750W Macerator Pump.
4. Specifications
| Feature | Specification |
|---|---|
| Brand | HOCANFLO |
| Model | 750W Macerator Pump (36ft Vertical Lift) |
| Material | Polypropylene (PP) |
| Product Dimensions (L x W x H) | 22" x 9" x 14" |
| Power Source | Corded Electric |
| Item Weight | 14 Pounds |
| Maximum Flow Rate | 180 Gallons Per Minute (160L/min) |
| Maximum Vertical Lifting Height | 36 Feet |
| Maximum Horizontal Discharge | 328 Feet (with 1-1/4" discharge pipe) |
| Voltage | 120 Volts |
| Wattage | 750 Watts |
5. Setup and Installation
Careful planning and execution are essential for proper installation. Refer to the included multilingual installation manual for detailed diagrams and step-by-step instructions.
5.1 Placement
The macerator pump can be installed in various configurations, such as behind a toilet or concealed behind a wall, offering flexibility for your bathroom layout. Ensure adequate space for connections and future maintenance access.

Image 5.1: Flexible installation options for the HOCANFLO Macerator Pump, showing placement behind a toilet and behind a wall.
5.2 Plumbing Connections
The pump features three dedicated inlets for connecting various fixtures and a multi-size discharge outlet. Use the provided universal adapter rings for secure connections.
- Inlets: Connect your toilet, sink, bathtub/shower, or kitchen lines to the designated inlets. The system automatically detects wastewater flow.
- Discharge: Plan your discharge pipe route, considering the pump's 36ft vertical lift and 328ft horizontal push capabilities. Ensure the discharge pipe is 1-1/4" for optimal flow. The pre-installed check valve prevents backflow.
- Ventilation: The unit includes an activated carbon / vent pipe interface for deodorization. Connect a 1-1/2" ventilation duct for optimal odor control.

Image 5.2: Multi-water inlets and discharge outlet configuration for the HOCANFLO Macerator Pump.
5.3 Electrical Connection
Connect the pump using the provided 10-foot GFCI-protected power cord to a suitable 120V electrical outlet. Ensure the outlet is properly grounded and protected by a Ground Fault Circuit Interrupter (GFCI) for safety.
6. Operating Instructions
The HOCANFLO 750W Macerator Pump is designed for automatic operation.
- Automatic Activation: The pump features auto-sensing drainage. When wastewater flows into the inlets from connected fixtures (toilet, sink, shower, etc.), the pump automatically activates within 8 seconds to macerate and discharge the waste.
- Macerating System: The anti-clog stainless steel cutting system, powered by a robust 750W copper motor, efficiently pulverizes solids such as toilet paper, feminine products, and organic waste.
- Quiet Operation: The heavy-duty ABS housing incorporates sound-dampening technology for quieter operation compared to standard units.
- Dry-Run Protection: The intelligent system includes dry-run protection to ensure safe operation and prevent damage if no water is present.

Image 6.1: Internal view of the macerator pump's sharp stainless steel cutting system and copper motor.
7. Maintenance
The HOCANFLO macerator pump is engineered for minimal maintenance. Regular inspections can help ensure long-term reliability.
- Routine Inspection: Periodically check the pump for any visible leaks, unusual noises, or blockages. The tool-free cover design allows for quick and hassle-free inspections.
- Deodorization System: The dual-use filter provides both 1-1/2" ventilation duct deodorization and activated carbon deodorization. Ensure the ventilation path is clear and replace activated carbon as needed (if applicable to your model).
- Cleaning: If necessary, disconnect power and clean the exterior of the pump with a damp cloth. Avoid using harsh chemicals.
- Check Valve: The pre-installed check valve effectively prevents backflow. Ensure it is functioning correctly during inspections.

Image 7.1: Dual-use filter system for deodorization and built-in check valve.
8. Troubleshooting
If you encounter issues with your macerator pump, refer to the following common problems and solutions. For persistent issues, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump does not activate | No power, clogged inlet, sensor malfunction | Check power connection and GFCI. Inspect inlets for blockages. Contact support if sensor is suspected. |
| Pump runs continuously | Leak in system, faulty sensor, discharge blockage | Check all connections for leaks. Inspect discharge pipe for obstructions. Contact support. |
| Unusual noise or vibration | Foreign object in macerating chamber, motor issue | Disconnect power and inspect the macerating chamber for foreign objects. If clear, contact support. |
| Leakage from pump or connections | Loose connections, damaged seals, cracked housing | Tighten all pipe connections. Inspect seals and housing for damage. Replace damaged components or contact support. |
9. Warranty and Support
Your HOCANFLO 750W Macerator Pump is backed by a comprehensive 2-year warranty. This warranty covers manufacturing defects and ensures reliable performance under normal use conditions.
For technical assistance, warranty claims, or any questions regarding your product, please contact our US-based customer service team. Expert assistance is always available to help you with installation, operation, or troubleshooting.
Please have your product model and purchase date available when contacting support to expedite service.





