Product Overview
This manual provides detailed instructions for the assembly, safe operation, and maintenance of your IFANNY Metal Twin Over Full Bunk Bed Frame. Please read all instructions carefully before assembly and use to ensure safety and proper function.

Important Safety Information
- Do not exceed weight capacity of 330 lbs (150 kg) on the upper bunk and 440 lbs (200 kg) on the lower bunk.
- Be cautious of sharp edges on the metal frame during assembly and use.
- Ensure all connections are tight before use and periodically check for tightness.
- The upper bunk is equipped with a 10-inch high full-length safety guardrail to prevent accidental falls. Ensure mattresses used on the upper bunk do not exceed the height of the guardrail.
- Only use mattresses with a recommended thickness of 3" - 4" (not included).
- Children under 6 years old should not use the upper bunk.
- Always use the integrated ladder for accessing the upper bunk.
Assembly Instructions
Your IFANNY bunk bed is designed for straightforward assembly. An installation manual is included with your product. Please follow the step-by-step instructions provided in the included manual for proper assembly.
General Assembly Tips:
- Lay out all components and hardware before beginning.
- Assemble on a soft, clean surface to prevent scratches.
- Do not fully tighten all screws until the entire frame is assembled.
- Two people are recommended for assembly.

Operating Your Bunk Bed
This bunk bed features a twin bed on the upper level and a full-size bed on the lower level, designed for efficient space utilization.
Weight Capacities:
- Upper Bunk: Maximum 330 lbs (150 kg)
- Lower Bunk: Maximum 440 lbs (200 kg)
Access and Safety:
- Use the angled, integrated ladder for safe access to the upper bunk.
- The upper bunk includes a 10-inch high full-length safety guardrail. Ensure the mattress height does not compromise the effectiveness of the guardrail.
Space-Saving Features:
- The design provides a 37.5-inch gap between bunks for comfortable access.
- An 11.5-inch under-bed storage area is available for storing items.



Care and Maintenance
- Cleaning: Wipe the metal frame with a damp cloth and mild detergent. Avoid abrasive cleaners.
- Inspection: Periodically check all bolts and screws to ensure they are tight. Re-tighten if necessary.
- Noise Reduction: The bunk bed is equipped with mute bars. If any noise occurs, check for loose connections and ensure all slats are evenly distributed.
- Floor Protection: Non-slip foot pads are included to protect your floors from scratches.
Troubleshooting
- Squeaking/Noise: Ensure all assembly hardware is securely tightened. Check that the mattress is properly seated on the slats.
- Instability: Verify that the bed is assembled on a flat, level surface. Re-check all connections for tightness.
- Difficulty with Ladder: Ensure the ladder is correctly attached and stable before use.
Product Specifications
| Feature | Detail |
|---|---|
| Brand | IFANNY |
| Model Number | 10873-HU |
| Product Dimensions (L x W x H) | 78" x 56.5" x 63" (198.12 x 143.51 x 160.02 cm) |
| Upper Bunk Weight Capacity | 330 lbs (150 kg) |
| Lower Bunk Weight Capacity | 440 lbs (200 kg) |
| Material | Alloy Steel |
| Color | Black |
| Recommended Mattress Thickness | 3" - 4" (not included) |
| Under-Bed Clearance | 11.5 inches |
| Guardrail Height (Upper Bunk) | 10 inches |
| Included Components | 1 x Metal Bunk Bed, Installation Manual |
Warranty and Support
Warranty information for this product is not explicitly provided in the available details. For specific warranty terms and customer support, please contact IFANNY directly through their official channels or the retailer where the product was purchased.