Giantex GT12565ES-JV 2-Tier Round Dining Table User Manual

Introduction

Thank you for purchasing the Giantex 2-Tier Round Dining Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new table. Please read these instructions carefully before assembly and retain them for future reference.

Safety Information

• Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Assemble the table on a soft, clean surface to prevent scratches.
• Tighten all screws and bolts securely, but do not overtighten. Periodically check and re-tighten fasteners.
• Do not exceed the weight capacities: Tabletop 88 lbs (40 kg), Shelf 33 lbs (15 kg).
• Keep small parts away from children during assembly to prevent choking hazards.
• Use the adjustable foot pads to ensure the table is stable on uneven surfaces.

Package Contents

Verify that all components listed below are included in your package:

• 1 x Round Tabletop
• 1 x Under-Table Shelf
• 1 x Main Support Pillar
• 1 x Pedestal Base
• Hardware Pack (screws, bolts, washers, adjustable foot pads, assembly tool)
• 1 x User Guide (this document)

Setup and Assembly

Follow these steps carefully for proper assembly. It is recommended to have two people for assembly.

Step 1: Attach the Pedestal Base to the Main Support Pillar

Align the pedestal base with the bottom of the main support pillar. Secure them using the provided screws and the assembly tool. Ensure a snug fit.

Figure 1: Pedestal Base and Main Support Pillar. Note the adjustable foot pads for stability.

Step 2: Attach the Under-Table Shelf

Slide the under-table shelf onto the main support pillar at the desired height (approximately 24.5 inches from the floor). Secure it in place with the appropriate hardware.

Figure 2: Under-Table Shelf attachment point. This shelf organizes bottles, glasses, and bar accessories.

Step 3: Attach the Round Tabletop

Carefully place the round tabletop onto the top of the main support pillar. Align the pre-drilled holes and secure the tabletop using the remaining screws. Ensure all connections are firm.

Figure 3: Fully assembled table. The sleek round shape and gourd-inspired column contribute to its elegant design.

Step 4: Adjust Foot Pads

Once assembled, place the table in its desired location. Adjust the foot pads on the pedestal base by turning them until the table is level and stable on the floor.

Operating Instructions

• Placement: Position the table on a flat, stable surface. Use the adjustable foot pads to compensate for minor unevenness.
• Weight Capacity: Do not place items exceeding 88 lbs (40 kg) on the tabletop or 33 lbs (15 kg) on the under-table shelf.
• Recommended Stool Height: For optimal comfort, use bar stools with a seat height between 29.5 inches and 31.5 inches.
• Usage: This table is designed for dining, serving, and social gatherings in various settings such as home bars, pubs, dining rooms, and kitchens.

Maintenance

• Cleaning: Wipe the surface regularly with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
• Spills: Clean up spills immediately to prevent staining or damage to the wood.
• Fasteners: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as necessary to maintain stability.
• Environment: Avoid prolonged exposure to direct sunlight or extreme temperature changes, which can cause wood to warp or crack.

Troubleshooting

Specifications

Figure 4: Product Dimensions.

Warranty and Support

For warranty information, missing parts, or any product-related inquiries, please contact Giantex customer service. Refer to your purchase documentation for specific warranty terms and contact details.

Online Support: Visit the official Giantex website for FAQs and support resources.

Return Policy: This product is subject to a 30-day return policy from the date of purchase for refund or replacement, as per retailer terms.