1. Introduction
Thank you for choosing the ANLAN Electric Face Massager. This device is designed to provide comprehensive facial care, incorporating EMS micro-current technology, red and blue light therapy, adjustable vibration, and constant temperature heating. Please read this manual carefully before use to ensure proper operation and to maximize the benefits of your device. Keep this manual for future reference.
2. Safety Precautions
- Do not use the device on broken, irritated, or infected skin.
- Consult a physician before use if you have any pre-existing medical conditions, especially heart conditions, epilepsy, or if you are pregnant.
- Keep the device out of reach of children.
- Do not immerse the device in water or use it in excessively humid environments.
- Ensure the device is fully charged before first use.
- Always apply a suitable gel or moisturizer to the skin before using the EMS function to ensure proper conductivity and comfort.
- Discontinue use immediately if you experience any discomfort or adverse reactions.
- Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.
3. Product Overview
The ANLAN Electric Face Massager is a V-face shaping device designed for facial contouring and skin rejuvenation. It features multiple functions controlled via a remote for convenient, hands-free operation.
Image 3.1: ANLAN Electric Face Massager and Remote Control
Key Features:
- EMS Micro-current: Stimulates facial muscles to improve elasticity and contour.
- Red Light Therapy: 36 LED beads promote collagen production, lift, and tighten skin.
- Blue Light Therapy: 36 LED beads cleanse skin, reduce inflammation, and help with acne.
- Adjustable Vibration: 9 levels of vibration (up to 8600 vibrations/min) for muscle relaxation and fatigue relief.
- Constant Temperature Heating: Maintains a comfortable 42°C (±3°C) to promote product absorption and blood circulation.
- 4 Modes: Massage, Kneading, Acupressure, Tapping.
- Remote Control: For easy adjustment of settings during use.
Image 3.2: Device illustrating Red and Blue Light Therapy
Image 3.3: Four Modes of Operation
4. Setup
4.1 Charging the Device
Before first use, fully charge the device using the provided Type-C charging cable. The charging indicator will show the charging status and turn off or change color when fully charged.
4.2 Preparation for Use
- Cleanse your face thoroughly to remove any makeup or impurities.
- Apply a thin layer of conductive gel, serum, or moisturizer to the areas of your face where the device will make contact. This is crucial for effective EMS micro-current delivery and comfortable use.
- Adjust the head strap to comfortably fit the device around your chin and jawline. Ensure the electrodes are in firm contact with your skin.
5. Operating Instructions
The device is operated using the remote control. Ensure the main unit is powered on before using the remote.
5.1 Power On/Off
- To power on the main unit, press and hold the power button on the device.
- To power on the remote control, press the power button on the remote.
- The device will automatically shut off after 15 minutes of continuous use.
5.2 Mode Selection and Intensity Adjustment
Use the remote control to select from the 4 available modes and adjust the intensity levels (1-9).
- EMS + Blue Light Mode: Ideal for facial contouring, reducing inflammation, and addressing acne.
- EMS (with optional photon therapy): Focuses on reducing wrinkles and improving skin texture.
- EMS + Red Light Mode: Designed for skin firming, anti-aging, and promoting collagen production.
- Constant Temperature (42°C): Activate by pressing and holding the heat button for 3 seconds until "Heat" is displayed. This function enhances product absorption and relaxes facial muscles.
Image 5.1: Adjustable Vibration Levels
Image 5.2: Constant Temperature Heat Treatment
5.3 Recommended Usage
Use the device for approximately 10-15 minutes per session, 3-4 times per week, or as desired. Adjust intensity levels to your comfort. The device is designed for hands-free use once positioned and activated.
6. Maintenance
6.1 Cleaning
- After each use, power off the device and wipe the electrode pads and main body with a soft, damp cloth.
- Do not use abrasive cleaners, alcohol, or harsh chemicals.
- Ensure the device is completely dry before storing.
6.2 Storage
Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case to prevent damage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low battery; Device not powered on correctly. | Charge the device fully. Press and hold the power button on the main unit. |
| No sensation from EMS. | Insufficient conductive gel; Low intensity setting; Poor skin contact. | Apply more conductive gel. Increase EMS intensity using the remote. Ensure electrodes are firmly against the skin. |
| Remote control not working. | Remote battery low; Main unit not powered on. | Ensure the main unit is on. Check or replace remote batteries if applicable (refer to remote manual). |
| Battery life is short. | Device not fully charged; Old battery. | Ensure device is charged until indicator shows full. If issue persists, contact customer support. |
8. Specifications
- Model Number: 89-2IYY-56GV
- Brand: ANLAN
- Power Source: Battery Powered
- Dimensions: 16.6 x 13.2 x 5.7 cm
- Weight: 290 grams
- Temperature Function: 42°C (±3°C)
- Vibration Frequency: Up to 8600 vibrations/min
- Modes: 4 (Massage, Kneading, Acupressure, Tapping)
- Intensity Levels: 9
- Light Therapy: Red LED, Blue LED (36 beads total)
9. Warranty and Support
ANLAN is committed to providing high-quality products and customer satisfaction.
- Warranty: 365-Day Guarantee
- Technical Support: Lifetime Technical Assistance
- Returns: Free Returns, 100% Refund
- Customer Service: Response within 24 hours on weekdays.
For any questions, concerns, or support needs, please contact us through Amazon's customer service portal. We are available to assist you anytime.
