1. Introduction
This manual provides essential information for the safe and efficient use of your Philips Braid CL610 LED Ceiling Light. This product features tunable white light (2700K to 6500K), dimmable brightness, and convenient remote control operation. It is designed with EyeComfort technology for reduced eye strain.
2. Safety Information
- Read all instructions carefully before installation and use.
- Installation must be performed by a qualified electrician in accordance with local electrical codes.
- Always disconnect power at the main circuit breaker before installation, maintenance, or cleaning.
- This product is designed for indoor use only. Do not expose to water or high humidity.
- Do not attempt to modify or disassemble the light fixture. There are no user-serviceable parts inside.
- Ensure the mounting surface can support the weight of the fixture.
3. Package Contents
Verify that all components are present before beginning installation:
- 1 x Philips Braid CL610 LED Ceiling Light Unit
- 1 x Remote Control
- Mounting Hardware (screws, anchors)
Image: The Philips Braid CL610 LED Ceiling Light unit shown alongside its remote control.
4. Setup and Installation
The Philips Braid CL610 LED Ceiling Light is designed for straightforward installation. No assembly of the light unit itself is required.
4.1 Pre-Installation
- Turn off Power: Locate the circuit breaker controlling the light fixture's location and turn off the power. Verify power is off using a voltage tester.
- Prepare Mounting Location: Ensure the ceiling surface is clean, dry, and structurally sound.
4.2 Mounting the Fixture
- Remove Mounting Bracket: Detach the mounting bracket from the back of the light fixture.
- Mark Drill Holes: Hold the mounting bracket against the ceiling at the desired installation point. Mark the positions for the drill holes.
- Drill Holes and Insert Anchors: Drill pilot holes at the marked positions. Insert appropriate wall anchors if necessary.
- Secure Mounting Bracket: Attach the mounting bracket to the ceiling using the provided screws.
Image: Rear view of the Philips Braid CL610 LED Ceiling Light, illustrating the design for ceiling attachment.
Image: Side profile of the Philips Braid CL610 LED Ceiling Light, showing its slim design.
4.3 Wiring
- Connect Wires: Connect the household electrical wires to the corresponding wires on the light fixture. Typically, this involves connecting live to live, neutral to neutral, and ground to ground. Use appropriate wire connectors.
- Tuck Wires: Carefully tuck all wires into the junction box or ceiling cavity.
4.4 Securing the Light Fixture
- Attach Fixture: Align the light fixture with the mounting bracket and secure it according to the product's design (e.g., twisting or screwing into place).
- Restore Power: Once the fixture is securely installed, restore power at the circuit breaker.
5. Operating Instructions
The Philips Braid CL610 LED Ceiling Light is operated using the included remote control.
5.1 Remote Control Functions
Image: Close-up of the remote control, highlighting buttons for Night Mode, Delay Off Function, and Tunable White Color (3000K to 6500K).
- ON/OFF: Press the 'ON' button to turn the light on, and 'OFF' to turn it off.
- Brightness Adjustment (+/-): Use the '+' and '-' buttons to increase or decrease the light intensity.
- Color Temperature Adjustment (Sun/Snowflake icons): Press the 'Sun' icon to shift towards warmer white light (e.g., 2700K) and the 'Snowflake' icon to shift towards cooler white light (e.g., 6500K).
- Night Mode (Moon icon): Activates a low-brightness, warm light setting suitable for night time.
- Delay Off Function (Clock icon): Sets a timer for the light to turn off automatically after a specified period (refer to product specifications for exact delay times, if available).
Image: Visual representation of the Philips Braid CL610 LED Ceiling Light displaying various color temperatures, from warm white (2700K) to cool daylight (6500K).
5.2 Remote Control Range
The remote control operates effectively up to a distance of 10 meters from the light fixture. Ensure there are no significant obstructions between the remote and the light for optimal performance.
6. Maintenance
The Philips Braid CL610 LED Ceiling Light requires minimal maintenance.
- Cleaning: Ensure the power is off before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Bulb Replacement: The LED light source is integrated and not user-replaceable.
7. Troubleshooting
If you encounter issues with your Philips Braid CL610 LED Ceiling Light, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Loose wiring connection. Remote control battery depleted. | Check circuit breaker. Verify wiring connections (ensure power is off). Replace remote control batteries. |
| Remote control not responding. | Remote control battery depleted. Out of range. Obstruction between remote and light. | Replace remote control batteries. Move closer to the light fixture. Remove any objects blocking the signal path. |
| Light flickers or dims unexpectedly. | Unstable power supply. Loose wiring connection. | Consult an electrician to check household wiring. Verify wiring connections (ensure power is off). |
If the problem persists after attempting these solutions, contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model | CL610 |
| Brand | Signify (Philips) |
| Wattage | 24W |
| Lumen Output | 2550 lumens |
| Color Temperature | 2700K - 6500K (Tunable White) |
| Dimensions (L x W x H) | 30L x 30W x 10H cm |
| Power Source | Corded Electric |
| Indoor/Outdoor Use | Indoor |
| Material | Metal |
| Style | Modern |
| EyeComfort | Yes |
| Remote Control | Included |
| Assembly Required | No (for light unit) |
9. Warranty and Support
9.1 Warranty Information
This Philips Braid CL610 LED Ceiling Light comes with a 1 Year Local Warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.
9.2 Customer Support
For technical assistance, warranty claims, or further inquiries, please contact your local Philips customer service or the retailer from whom you purchased the product. Refer to the product packaging or the official Philips website for specific contact details in your region.
