RESTMO Sprinkler Timer User Manual

1. Introduction

Thank you for choosing the RESTMO Sprinkler Timer. This programmable water timer is designed to automate your garden and lawn watering, ensuring efficient irrigation while conserving water. It features automatic digital control, manual ON/Off functionality, and a rain delay option, making it ideal for outdoor faucets, drip irrigation systems, and lawn sprinklers.

2. Product Features

• Upgraded Waterproof & Durability: Engineered with a seamless embedded screen to prevent water ingress and a rugged textured panel for enhanced wear resistance. Features an IP55 waterproof battery compartment.
• Ergonomic Design: Includes an oversized dial and separate buttons for easy programming and a heavy-duty housing for durability.
• Rain Delay & Manual Watering Mode: Offers a manual watering mode (1 to 299 minutes) and a rain delay option (24/48/72 hours) for flexible watering schedules.
• Easy Setup: Simple programming via the oversized dial and easy-to-read large LCD screen displaying next watering time, current time, and battery status.
• Versatile Application: Suitable for garden hose irrigation, lawn sprinklers, greenhouse misting, pool filling, birdbaths, and pet water dispensers.

Figure 2.1: Overview of key features including timed watering, manual mode, rain delay, IP55 waterproof rating, filter washer, LCD display, durable material, and compact design.

3. Package Contents

• RESTMO Sprinkler Timer Unit(s)
• User Manual

Note: 2 x AAA alkaline batteries are required and not included.

Figure 3.1: The RESTMO Sprinkler Timer units.

4. Setup

1. Battery Installation: Open the battery compartment on the back of the timer. Insert 2 new AAA alkaline batteries, ensuring correct polarity. Close the compartment securely to maintain IP55 waterproof rating.
2. Attach to Faucet: Screw the timer onto a standard 3/4-inch outdoor faucet. Ensure the connection is tight to prevent leaks. The timer includes a built-in metal filter; ensure it is properly seated.
3. Connect Hose: Attach your garden hose or drip irrigation system to the bottom outlet of the timer (3/4-inch fitting).

Figure 4.1: Illustration of the timer's waterproof screen, built-in metal filter, and IP55 waterproof battery compartment.

Figure 4.2: The ergonomic design features an oversized dial, separate buttons, and heavy-duty housing for ease of use and durability.

5. Operating Instructions

5.1. Setting the Clock

1. Rotate the main dial to the SET CLOCK position.
2. Use the + and - buttons to adjust the current time. The display shows AM/PM for 12-hour format.
3. Press OK/MANUAL to confirm and move to the next setting, or rotate the dial to the next desired function.

5.2. Automatic Watering Program

To set an automatic watering schedule, follow these steps:

1. Rotate the main dial to START TIME. Use + and - to set the desired watering start time. Press OK/MANUAL to confirm.
2. Rotate the dial to HOW LONG. Use + and - to set the watering duration (from 1 minute to 299 minutes). Press OK/MANUAL to confirm.
3. Rotate the dial to HOW OFTEN. Use + and - to set the watering frequency (from 1-12 hours or 1-7 days). Press OK/MANUAL to confirm.
4. Once all settings are configured, rotate the dial to the ON position to activate the automatic program. The timer will now operate according to your set schedule.

Figure 5.1: Steps for setting up automatic watering, including clock, start time, duration, and frequency.

5.3. Manual Watering Mode

To initiate manual watering without affecting your programmed schedule:

1. Ensure the dial is in the ON or OFF position.
2. Long press the OK/MANUAL button. The display will show a default manual watering duration.
3. Use the + and - buttons to adjust the manual watering duration (from 1 minute to 299 minutes).
4. Press OK/MANUAL again to start manual watering. The timer will run for the set duration and then return to its programmed schedule.

Figure 5.2: Activating and setting the duration for manual watering mode.

5.4. Rain Delay Function

To temporarily pause your watering schedule due to rain or other reasons:

1. Ensure the dial is in the ON position.
2. Long press the DELAY button. The display will show the default delay option (e.g., 24h).
3. Use the + and - buttons to select the desired rain delay duration (24, 48, or 72 hours).
4. Press OK/MANUAL to confirm the rain delay. The timer will pause for the selected duration and then resume its programmed schedule automatically.

Figure 5.3: How to activate and set the rain delay function for 24, 48, or 72 hours.

5.5. Turning Off the Timer

To completely stop all watering functions, rotate the main dial to the OFF position.

6. Maintenance

• Cleaning: Periodically clean the timer's exterior with a damp cloth. Do not use abrasive cleaners.
• Filter Washer: Regularly check and clean the built-in metal filter washer at the inlet to prevent debris from clogging the timer or your irrigation system.
• Battery Replacement: Replace batteries when the low battery indicator appears on the LCD screen to ensure continuous operation.
• Winterization: Before freezing temperatures, disconnect the timer from the faucet and hose. Drain any remaining water and store the timer indoors in a dry, frost-free location. Failure to do so may result in damage to the unit.

7. Troubleshooting

8. Specifications

Figure 8.1: Product diagram with key dimensions and component labels, alongside detailed specifications.

9. Warranty & Support

RESTMO products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Restmo website.

Please retain your proof of purchase for warranty claims.