1. Introduction
This manual provides essential instructions for the safe and effective use of your Kedean 600W Electric Fin Trolling Motor. This compact and lightweight underwater thruster is designed for various small watercraft, including kayaks, stand-up paddleboards (SUPs), float tubes, and belly boats. It features an efficient built-in brushless motor, offering enhanced propulsion for your water activities.
Please read this manual thoroughly before installation and operation to ensure proper usage and to prevent damage to the product or injury.
2. Safety Information
- Always wear a personal flotation device (PFD) when operating watercraft.
- Ensure all electrical connections are secure and waterproof before use.
- Do not operate the motor if the propeller is obstructed or damaged.
- Keep hands, feet, and loose clothing clear of the propeller during operation.
- Disconnect the power source before performing any maintenance or inspection.
- Operate the motor only in suitable water conditions and within your skill level.
- This motor requires a DC24V battery (not included with this model). Ensure the battery is correctly rated and properly connected.
3. Package Contents
Verify that all items listed below are present in your package:
- 1x Kedean 600W Motor Unit
- 1x Fish Fin and Bracket Set
- 1x Upgraded ESC Heat Sink
- 1x Remote Control
- 1x Instruction Manual
- Mounting Brackets (Standard and USA-standard types, one included based on selection)
4. Setup and Installation
The Kedean 600W motor is designed for easy retrofit and comes with two types of standard mounting brackets: a push-in type and a USA-standard type. Choose the bracket suitable for your watercraft.
4.1 Battery Connection (for models without included battery)
This 600W motor operates on DC24V. If your model did not include a battery, you will find positive and negative wire leads. Connect these leads to your own DC24V battery, ensuring correct polarity (red to positive, black to negative). Refer to the specific wiring diagram in the included manual for detailed instructions.
4.2 Motor Mounting Steps
- Step 1: Attach Mounting Bracket. Unscrew the screws from the base of the motor mounting area. Insert the chosen mounting bracket, then secure it with the screws. Pay attention to the mounting direction for optimal performance.
- Step 2: Secure Belly Fin. Secure the motor belly fin to the motor unit using the provided screws.
- Step 3: Insert into Watercraft Slot. Insert the bracket for the motorized fin into the bottom slot of your inflatable stand-up paddleboard (iSUP) or kayak.
- Step 4: Lock in Place. Push the mounting bracket fully to the bottom of the slot and insert the locking pin to secure it.
5. Operating Instructions
The Kedean 600W motor provides efficient propulsion for your water adventures. It is designed with a hydrodynamic shape to minimize drag and maximize thrust.
- Power On/Off: Use the remote control to power the motor on or off.
- Speed Control: The remote control allows for adjustment of motor speed. Refer to the remote control's specific instructions for speed settings.
- Direction Control: Steering is typically achieved by paddling or shifting body weight on the watercraft, as the motor provides forward thrust.
- Water Conditions: The thruster is suitable for a variety of water conditions, including calm lakes, rivers, and mild ocean waves.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Kedean motor.
- Rinse After Use: After each use, especially in saltwater, rinse the motor thoroughly with fresh water to remove salt, sand, and debris.
- Inspect Propeller: Regularly check the propeller for any fishing lines, weeds, or damage. Clear any obstructions carefully.
- Check Connections: Periodically inspect all electrical connections for corrosion or looseness.
- Storage: Store the motor in a dry, cool place away from direct sunlight when not in use.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Motor does not start. | No power to motor; battery low or disconnected; remote control issue. | Check battery charge and connections. Ensure remote control is paired and has fresh batteries. |
| Reduced thrust or unusual noise. | Propeller obstructed by debris (e.g., fishing line, weeds); damaged propeller. | Disconnect power, inspect and clear propeller. If damaged, replace propeller. |
| Motor stops unexpectedly. | Battery overheating or low charge; loose connection. | Check battery level and connections. Allow motor/battery to cool if overheating is suspected. |
8. Specifications
| Brand | Kedean |
| Model | 600W Motor |
| Power Output | 600 Watts |
| Voltage | DC24V |
| Thrust | 28 Lbs |
| Maximum Speed | Up to 9 KM/H |
| Item Weight | 1.6 kgs (3.5 lbs) - Motor Unit Only; Total package weight: 12 Kilograms (26.4 pounds) |
| Material | High-quality engineering plastics and aluminum alloy |
| Color | Black |
| Engine Type | Electric, Brushless Motor |
| Operation Mode | Electric |
| Recommended Uses | Fishing Kayaking, Belly Boat, SUP, Float Tube |
| Mounting Type | Engine Mount (with standard and USA-standard bracket options) |
| UPC | 752815221476 |
| ASIN | B0DXVMQ8G2 |
9. Warranty and Support
For warranty information, technical support, or replacement parts, please contact the manufacturer, Kedean, or your authorized dealer. Refer to the contact details provided in the original product packaging or on the manufacturer's official website.
