Vente-unique LASANDRIA Adjustable Bar Stools Instruction Manual

1. Introduction

Thank you for choosing the Vente-unique LASANDRIA adjustable bar stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before use and retain them for future reference.

The LASANDRIA bar stools are designed to offer comfort and elegance. Their simple design, featuring terracotta textured fabric and a black metal base, allows for easy integration into various interior decors. Each stool features adjustable height and a 360-degree swivel seat, adapting to different dining and bar spaces. This product is sold as a set of two stools of the same color.

Image 1.1: Two LASANDRIA bar stools in terracotta fabric and black metal, shown in a contemporary room setting.

2. Safety Information

• Always ensure all components are securely fastened before use.
• Do not stand on the stool or use it as a ladder.
• Do not exceed the maximum weight capacity of 110 kg (242 lbs) per stool.
• Keep children away from the assembly area. Small parts can be a choking hazard.
• Use the stools on a flat, stable surface to prevent tipping.
• Avoid sudden movements or leaning excessively while seated, especially when adjusting height.
• Regularly check all screws and connections to ensure they remain tight.

3. Setup and Assembly

The LASANDRIA bar stools require self-assembly. Please follow these general steps. It is recommended to assemble the stools on a soft, clean surface to prevent scratches.

3.1. Unpacking

• Carefully remove all components from the packaging.
• Verify that all parts listed in the included hardware pack are present.
• Dispose of packaging materials responsibly.

3.2. Assembly Steps

1. Attach the footrest ring to the central metal column. Ensure it is oriented correctly.
2. Insert the gas lift cylinder into the base.
3. Place the assembled seat onto the gas lift cylinder. Ensure it is securely seated.
4. Tighten all screws and bolts using the provided tools. Do not overtighten.

Image 3.1: Detail of the sturdy black metal base and circular footrest.

4. Operating Instructions

4.1. Height Adjustment

To adjust the seat height, locate the lever positioned under the seat. While seated, pull the lever upwards to lower the seat. To raise the seat, stand up and pull the lever upwards; the seat will automatically rise. Release the lever at the desired height to lock it in place. The seat height can be adjusted between 63 cm and 84 cm.

4.2. Swivel Function

The LASANDRIA bar stools feature a 360-degree swivel seat. Simply rotate the seat in any direction while seated. No lever or button is required for this function.

Image 4.1: An angled view of a single LASANDRIA bar stool, highlighting the height adjustment lever beneath the seat.

5. Maintenance and Care

Proper care will extend the life and appearance of your bar stools.

5.1. Fabric Care (100% Polyester)

• Regular Cleaning: Vacuum the fabric regularly using an upholstery attachment to remove dust and loose particles.
• Spot Cleaning: For spills, blot immediately with a clean, dry cloth. Do not rub, as this can spread the stain. For stubborn stains, use a mild fabric cleaner specifically designed for polyester, following the product instructions. Test on an inconspicuous area first.
• Avoid Harsh Chemicals: Do not use bleach, abrasive cleaners, or solvents, as these can damage the fabric.
• Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading.

5.2. Metal Base Care

• Wipe the metal parts with a soft, damp cloth.
• Dry immediately with a clean, dry cloth to prevent water spots or rust.
• Avoid using abrasive cleaners or scouring pads, which can scratch the finish.

5.3. General Maintenance

• Periodically check all screws and connections and tighten them if necessary.
• Ensure the gas lift mechanism operates smoothly. If it becomes stiff, a small amount of silicone spray can be applied to the moving parts (avoiding the cylinder itself).

Image 5.1: A detailed view of the terracotta textured polyester fabric used for the seat and backrest.

6. Troubleshooting

• Stool is wobbly: Check all assembly screws and ensure they are tightened securely. Make sure the stool is on a flat, even surface.
• Height adjustment not working: Ensure the lever is fully engaged. Check for any obstructions around the gas lift cylinder. If the gas lift is faulty, it may need replacement (contact customer support).
• Swivel function is stiff: Ensure no debris is obstructing the swivel mechanism. A small amount of silicone spray can be applied to the swivel plate if accessible.
• Unusual noises: Check for loose connections or parts rubbing against each other. Tighten any loose fasteners.

7. Specifications

8. Warranty and Support

For any questions, concerns, or issues regarding your Vente-unique LASANDRIA bar stools, please contact the seller or Vente-unique customer support directly. Please have your purchase information and product model (LASANDRIA) available when contacting support.

Information regarding the availability of spare parts is not provided at this time. Please inquire with customer support for specific part needs.