1. Product Overview
The Avistar Extra Strong Denture Adhesive Cream is designed to provide a secure and comfortable hold for full and partial dentures. This formula offers an extra-strong, waterproof grip for 8-12 hours, effectively sealing out food particles and reducing gum irritation. It features a refreshing mint flavor and is formulated without zinc or fluoride, prioritizing user health and safety.
Image: Avistar Extra Strong Denture Adhesive Cream tube and its retail packaging, highlighting the product's appearance.
Key Features:
- Extra Strong Hold: Provides 8-12 hours of secure, waterproof grip.
- Superior Sealing: Effectively seals out food particles, enhancing comfort and reducing irritation.
- Zinc & Fluoride Free: Formulated with safe, food-grade ingredients without zinc or fluoride.
- Easy Application: Features a precision nozzle for controlled and accurate application.
- Refreshing Mint Flavor: Leaves a fresh sensation after application.
2. Safety Information and Precautions
Before using Avistar Denture Adhesive Cream, please read and understand the following safety guidelines:
- Do not use more product than instructed. Excessive use may lead to oozing.
- Do not use if you have a known allergy or sensitivity to any of the ingredients listed.
- Keep out of reach of children.
- If irritation or discomfort occurs, discontinue use and consult a dental professional.
- Do not use on broken or irritated oral tissue.
- Store in a cool, dry place.
Image: Visual confirmation that the product is Zinc Free and Fluoride Free, emphasizing its safe formulation.
3. Ingredients and Composition
The Avistar Denture Adhesive Cream is formulated with the following ingredients:
- Calcium/sodium PVM/MA copolymer
- Petrolatum
- Cellulose gum
- Mineral oil
- Menthol (for mint flavor)
- Paraffin
- Methyl-P-hydroxybenzoate
- Silica
- Vaseline
Image: An infographic illustrating the 100% food-grade and safe ingredients used in the Avistar Denture Adhesive Cream, explaining the function of each component.
4. Application Instructions
Follow these steps for optimal adhesion and comfort:
- Clean and Dry Dentures: Ensure your dentures are thoroughly cleaned and completely dry before applying the adhesive. Any moisture can reduce the effectiveness of the hold.
- Apply Adhesive in Thin Lines: Apply a small amount of adhesive in thin, continuous lines on the denture surface that will come into contact with your gums. For upper dentures, apply along the ridge and in the center. For lower dentures, apply along the ridge. For partials, apply to the areas that contact your gums. Avoid applying too close to the edge of the denture to prevent oozing.
- Insert Dentures and Hold Briefly: Place the dentures firmly into your mouth and hold them in place for a few seconds to allow the adhesive to set.
Image: A step-by-step visual guide on how to apply the denture adhesive, showing cleaning, precise application on different denture types, and insertion.
Image: A close-up view demonstrating the precision nozzle of the Avistar tube, allowing for easy and accurate application of the cream onto a denture.
5. Maintenance and Removal
Proper maintenance ensures hygiene and extends the life of your dentures.
Removing Dentures:
To remove your dentures, rinse your mouth with warm water. Gently rock the denture back and forth until it loosens. If removal is difficult, a warm saltwater rinse or a denture cleanser soak may help.
Cleaning Dentures and Adhesive Residue:
- After removal, clean your dentures thoroughly with a soft-bristle brush and denture cleanser to remove any adhesive residue and food particles.
- Rinse your mouth with warm water to remove any remaining adhesive from your gums, palate, and tongue. A soft brush or cloth can be used to gently wipe away residue from oral tissues.
- For stubborn adhesive residue on dentures, consider using a specialized denture cleaning tablet or soaking solution.
6. Troubleshooting
Here are solutions to common issues you might encounter:
| Issue | Possible Cause | Solution |
|---|---|---|
| Denture not holding securely or hold is short-lived. |
|
|
| Adhesive oozes out from under dentures. |
|
|
| Difficulty removing adhesive residue from gums or dentures. |
|
|
7. Product Specifications
| Specification | Detail |
|---|---|
| Product Name | Avistar Extra Strong Denture Adhesive Cream |
| Model Number | AV-DA5 |
| Brand | Avistar |
| Item Form | Cream |
| Hold Duration | 8-12 hours |
| Key Features | Waterproof, Zinc Free, Fluoride Free, Mint Flavor, Precision Nozzle |
| Package Dimensions | 6.18 x 2.44 x 1.69 inches |
| Item Weight | 3.84 ounces |
| Country of Origin | China |
Image: Illustrates the product's long-lasting, waterproof grip and its ability to seal out food, enhancing comfort during meals.
Image: Highlights the fresh mint flavor of the adhesive cream, contributing to a pleasant user experience.
8. Warranty and Support
Avistar stands behind the quality of its products. If you are not completely satisfied with your purchase, Avistar offers a money-back guarantee.
- Return Policy: Products are eligible for a refund or replacement within 30 days of purchase.
- Customer Satisfaction Guarantee: If for any reason you are not satisfied, please contact Avistar customer service for assistance.
- Contact Support: For further inquiries or support, please visit the official Avistar store on Amazon or refer to the contact information provided on the product packaging.
For more information and to explore other Avistar products, visit the Avistar Store on Amazon.
