1. Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Fulgor Milano FCLHD 9041 HID TS BK2 Induction Hob with Integrated Cooker Hood. Please read these instructions thoroughly before using the appliance and retain them for future reference.
The Fulgor Milano ARIA+ series combines an induction hob with a high-performance, low-consumption cooker hood designed to effectively dissipate fumes and odors during cooking. It features a new Space-saver engine system for optimized kitchen space.
2. Safety Information
Always prioritize safety when operating electrical appliances. Failure to follow safety instructions can result in injury or damage to the appliance.
- Electrical Connection: Ensure the appliance is correctly installed by a qualified technician and connected to a suitable power supply in accordance with local regulations.
- Ventilation: Adequate ventilation must be maintained around the appliance. Do not obstruct the air inlets or outlets.
- Hot Surfaces: The hob surface can remain hot after use. Exercise caution to avoid burns. The appliance includes a Residual heat indicator (H).
- Child Safety: This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Keep children away from the appliance during operation. A Safety switch prevents accidental use.
- Pots and Pans: Use only induction-compatible cookware. Ensure pots and pans are correctly positioned on the cooking zones. The hob features a Puncture detection sensor.
- Cleaning: Disconnect the appliance from the power supply before cleaning. Do not use abrasive cleaners or steam cleaners.
- Automatic Shut-off: The hob is equipped with an Automatic shut-off with temperature sensor for enhanced safety.
3. Setup and Installation
Installation of the Fulgor Milano FCLHD 9041 HID TS BK2 Induction Hob with Integrated Cooker Hood should be performed by a qualified professional to ensure proper function and safety.
3.1 Unpacking
Carefully remove the appliance from its packaging. Inspect for any signs of damage. Report any damage to your supplier immediately.
3.2 Placement and Ventilation
The appliance is designed for Flush Top Installation. Ensure the countertop opening dimensions comply with the installation template provided with the product. Adequate clearance must be maintained for the integrated cooker hood's ducting system. The Space-saving motor design facilitates installation in various kitchen configurations.
3.3 Electrical Connection
The electrical connection must be carried out by a licensed electrician. Ensure the voltage and frequency ratings of the appliance match your household's electrical supply. The appliance must be properly grounded.
Figure 1: Top view of the Fulgor Milano FCLHD 9041 HID TS BK2 Induction Hob with the integrated cooker hood closed. This image shows the sleek black glass surface and the four cooking zones.
4. Operating Instructions
The Fulgor Milano FCLHD 9041 HID TS BK2 features intuitive Touch slider controls for precise operation.
4.1 Activating the Hob
Press the main power button to turn on the hob. The control panel will illuminate.
4.2 Cooking Zones
The hob features 4 cooking zones. To activate a cooking zone, place an induction-compatible pot on it and select the desired zone using the touch controls. Adjust the power level using the touch slider.
4.3 Flex Zones
The appliance includes 2 horizontal flex zones. These zones can be combined to accommodate larger or irregularly shaped cookware. To activate a flex zone, select the corresponding control and place your cookware across the designated area. Adjust power as needed.
Figure 2: Angled view of the induction hob with the integrated cooker hood open and two pots placed on the flex zones, demonstrating their versatility for larger cookware.
4.4 Special Functions
- Fast heating boosters: Activate the booster function for rapid heating of a cooking zone.
- Automatic heating: This function brings the zone to a high power level and then automatically reduces it to a pre-selected lower level.
- Keep warm: Maintain food at a serving temperature using the keep warm function.
- End cooking timer: Set a timer for individual cooking zones. The zone will automatically switch off when the set time expires.
4.5 Cooker Hood Operation
The integrated cooker hood features a Rear cap with electric opening. To activate the hood, press the dedicated control button. The rear cap will automatically open, and the fan will start. Adjust the suction speed using the touch controls. The hood offers a Suction capacity: 645 m³/h and operates with a Noise level: from 53 to 63 dBA.
Figure 3: Angled view of the induction hob showing the integrated cooker hood in its open position, revealing the extraction area.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your appliance.
5.1 Cleaning the Ceramic Surface
The hob features a durable CeraBlack ceramic surface. Clean the surface after each use once it has cooled down. Use a soft cloth and a non-abrasive cleaner specifically designed for ceramic hobs. Wipe dry with a clean cloth.
5.2 Cooker Hood Filter Maintenance
The integrated cooker hood contains grease filters that need regular cleaning or replacement. Refer to the detailed instructions in the full product manual for specific filter removal and cleaning procedures. Ensure the appliance is disconnected from the power supply before performing any maintenance.
Figure 4: Top view of the induction hob with the integrated cooker hood open, clearly showing the removable grease filters for maintenance.
6. Troubleshooting
Before contacting customer service, please refer to the following common issues and solutions:
- Hob not turning on: Check if the appliance is properly connected to the power supply. Ensure the main power button has been pressed.
- Cooking zone not heating: Verify that induction-compatible cookware is being used and is correctly centered on the zone. Check for error codes displayed on the control panel.
- Cooker hood not operating: Ensure the hood's power button is pressed and the rear cap is fully open. Check for any obstructions.
- Unusual noises: Minor humming or clicking sounds are normal during induction cooking. If loud or persistent unusual noises occur, consult the full manual or customer support.
- Error codes: If an error code appears on the display, consult the full product manual for a list of codes and their corresponding solutions.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | FCLHD 9041 HID TS BK2 |
| Product Dimensions | 20.47"D x 7.68"W x 7.68"H (52 x 19.5 x 19.5 cm) |
| Item Weight | 33 pounds (15 kg) |
| Brand | Fulgor Milano |
| Color | Black glass |
| Fuel Type | Electric |
| Burner Type | Induction |
| Cooking Zones | 4 (including 2 horizontal flex zones) |
| Cooker Hood Suction Capacity | 645 m³/h |
| Cooker Hood Noise Level | 53 to 63 dBA |
| Energy Efficiency Class | A+ |
| Included Components | Induction hob integrated with the cooker hood |
8. Warranty and Support
For warranty information, please refer to the warranty card included with your product or visit the official Fulgor Milano website. For technical support, spare parts, or service requests, please contact Fulgor Milano customer service or your authorized dealer. Always provide the model number (FCLHD 9041 HID TS BK2) when seeking assistance.
