DOGNESS 9L Automatic Pet Feeder User Manual

1. Introduction

Thank you for choosing the DOGNESS 9L Automatic Pet Feeder. This device is designed to provide your pet with scheduled and portion-controlled meals, ensuring a consistent feeding routine even when you are away. Please read this manual thoroughly before operating the feeder to ensure proper use and maintenance.

2. Important Safety Information

• This appliance is for indoor use only.
• Use only dry pet food with kibble sizes between 0.2 and 0.6 inches (0.5 to 1.5 cm) to prevent clogging.
• Do not immerse the main unit in water or any other liquid.
• Keep the feeder out of reach of children and pets when not in use or during cleaning.
• Always unplug the feeder before cleaning or performing maintenance.
• Ensure the power adapter cable is not damaged or chewed by pets.
• Do not attempt to repair or modify the feeder yourself. Contact customer support for assistance.

3. Package Contents

Please check the package contents to ensure all items are present:

• DOGNESS 9L Automatic Pet Feeder Main Unit
• Food Hopper Lid
• Food Bowl (Base)
• Power Adapter
• User Manual (this document)

4. Product Overview

Familiarize yourself with the components of your DOGNESS Automatic Pet Feeder.

Figure 4.1: Front view of the DOGNESS 9L Automatic Pet Feeder.

• Food Hopper: Large capacity container for dry pet food.
• Lid: Secures the food hopper.
• Control Panel & LCD Display: For programming and operating the feeder.
• Food Outlet: Where food is dispensed.
• Food Bowl: Detachable tray for pet to eat from.
• Power Port: For connecting the AC adapter.
• Battery Compartment: For backup batteries (located at the bottom).

Figure 4.2: Detailed view of the control panel and LCD display.

5. Setup Guide

5.1 Unpacking and Assembly

1. Carefully remove all components from the packaging.
2. Place the main unit on a flat, stable surface.
3. Attach the food bowl to the main unit by sliding it into place until it clicks securely.

5.2 Powering the Feeder

The feeder can be powered by an AC adapter or backup batteries.

• AC Power: Connect the power adapter to the feeder's power port and then plug it into a standard wall outlet.
• Battery Backup: For power outages, the feeder supports D-cell batteries (not included). Open the battery compartment at the bottom of the unit and insert the required number of D-cell batteries, ensuring correct polarity. The internal Lithium-ion battery included is for maintaining settings.

5.3 Filling the Food Hopper

Figure 5.1: The large 9-liter capacity food hopper.

1. Open the lid of the food hopper.
2. Pour dry pet food into the hopper. Ensure the kibble size is appropriate (0.2 to 0.6 inches).
3. Close the lid securely to maintain food freshness and prevent spills.

6. Operating Instructions

6.1 Setting the Current Time

Before programming meal times, set the current time on the feeder's LCD display.

1. Press the "SET" button to enter time setting mode.
2. Use the "HOUR" and "MINUTE" buttons to adjust the current hour and minute.
3. Press "SET" again to confirm and exit.

6.2 Programming Meal Times and Portions

The feeder allows you to schedule up to 4 meals per day with customizable portion sizes.

1. Press the "MEAL" button to cycle through Meal 1, Meal 2, Meal 3, and Meal 4 settings.
2. For each meal, use the "HOUR" and "MINUTE" buttons to set the desired feeding time.
3. Use the "PORTION" button to adjust the number of servings for that meal. Each serving dispenses a specific amount of kibble. Refer to the specifications for approximate serving size.
4. After setting each meal, press "SET" to save the settings and move to the next meal or exit programming mode.
5. Ensure the meal schedule is activated (usually indicated by an "ON" or active icon on the display for each meal).

Figure 6.1: The feeder providing automatic, scheduled meals.

6.3 Voice Recording

You can record a personalized voice message (up to 10 seconds) that will play before each meal to call your pet.

1. Press and hold the "REC" button until the display indicates recording mode.
2. Speak clearly into the microphone (usually located near the control panel).
3. Release the "REC" button to save the recording.
4. Press the "PLAY" button to listen to your recorded message.

6.4 Manual Feeding

To dispense food instantly outside of scheduled meal times:

• Press the "MANUAL" button once to dispense one serving.
• Press multiple times for additional servings.

Figure 6.2: Food being dispensed, demonstrating the anti-clogging design.

7. Maintenance and Cleaning

7.1 Cleaning the Feeder

1. Unplug the feeder from the power outlet and remove any backup batteries.
2. Remove any remaining food from the hopper and food bowl.
3. The food bowl is detachable and can be washed with mild soap and water. Rinse thoroughly and dry completely before reattaching.
4. Wipe the interior of the food hopper and the exterior of the main unit with a damp cloth. Do not use abrasive cleaners.
5. Ensure all parts are completely dry before reassembling and refilling with food.

7.2 Refilling Food

Regularly check the food level in the hopper. Refill as needed to ensure continuous feeding for your pet.

7.3 Battery Replacement

If using D-cell batteries for backup, replace them when the low battery indicator appears on the LCD display or approximately every 6-12 months, depending on usage.

8. Troubleshooting

9. Specifications

Figure 9.1: Dimensions of the DOGNESS 9L Automatic Pet Feeder.

10. Warranty and Support

DOGNESS products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or visit the official DOGNESS website. If you encounter any issues or have questions regarding your pet feeder, please contact DOGNESS customer support for assistance.

Customer Support: Please refer to your purchase documentation or the manufacturer's website for contact details.