HOOBRO BB71XG01 Narrow Console Table Instruction Manual

1. Introduction

Thank you for choosing the HOOBRO BB71XG01 Narrow Console Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image 1.1: The HOOBRO BB71XG01 Narrow Console Table, showcasing its compact design and storage capabilities in a home environment.

2. Safety Information

To ensure safe use and prevent damage, please observe the following safety guidelines:

• Do not put overweight items on the product. The top surface supports up to 88 lb (39.9 kg), and each mesh shelf supports up to 33 lb (15 kg).
• For safety reasons, children are not allowed to climb on or play with this product.
• Assemble the product on a soft, clean surface to prevent scratches.
• Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten if necessary.
• Keep small parts and packaging materials away from children.
• If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.

3. Package Contents

Before assembly, verify that all components listed below are present and undamaged:

• 1 x Console Table Frame (Metal)
• 1 x Top Panel (Engineered Wood)
• 1 x Bottom Shelf (Engineered Wood)
• 2 x Fabric Drawers (Non-woven fabric with bottom board)
• 1 x Accessory Kit (Includes screws, bolts, and an Allen key)
• 1 x Instruction Manual (This document)

Note: The accessory kit includes all necessary tools for assembly.

4. Assembly Instructions

Follow these steps carefully to assemble your HOOBRO BB71XG01 Console Table. It is recommended to assemble with two people.

Step 1: Prepare Components

Unpack all components and lay them out on a clean, soft surface (e.g., a carpet or blanket) to prevent scratches. Identify each part using the provided labels in the accessory kit.

Step 2: Assemble the Metal Frame

Connect the vertical metal supports to the horizontal metal bars using the provided screws and Allen key. Ensure the frame is stable and aligned. Do not fully tighten screws until all parts are loosely connected to allow for adjustments.

Step 3: Attach the Bottom Shelf

Place the engineered wood bottom shelf onto the designated supports on the metal frame. Secure it with the appropriate screws. Ensure the shelf is level.

Step 4: Attach the Top Panel

Position the engineered wood top panel onto the upper part of the metal frame. Align the pre-drilled holes and secure the top panel with screws. Once all panels are in place, fully tighten all screws on the entire structure.

Step 5: Insert Fabric Drawers

Unfold the fabric drawers and insert the bottom board into each drawer to give them shape and stability. Slide the assembled drawers into their designated slots under the top panel.

Image 4.1: The 2-tier storage design, featuring the top surface and two fabric drawers for organized storage.

Step 6: Adjust Leveling Feet

The console table is equipped with 4 adjustable feet. Place the table in its desired location and adjust each foot individually by rotating it until the table is stable and level on uneven floors, preventing wobbling and scratches.

Image 4.2: Detail of the adjustable feet, designed to stabilize the table on various floor surfaces.

5. Operating Instructions

The HOOBRO BB71XG01 Console Table is designed for versatile storage and display:

• Top Surface: Use the top surface for decorative items, lamps, or frequently accessed items. Ensure the total weight does not exceed 88 lb (39.9 kg).
• Fabric Drawers: The two fabric drawers provide enclosed storage for smaller items, helping to keep your space tidy.
• Bottom Shelf: The open bottom shelf is suitable for books, storage boxes, or larger decorative pieces. Each shelf supports up to 33 lb (15 kg).

Image 5.1: The console table functioning as an entryway piece, holding various items on its top and bottom shelf.

6. Maintenance

To maintain the appearance and longevity of your console table:

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
• Spills: Clean up spills immediately to prevent staining, especially on the engineered wood surfaces.
• Drawer Care: The fabric drawers can be spot cleaned with a mild detergent and allowed to air dry. Do not machine wash.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
• Environment: Avoid placing the table in direct sunlight or near heat sources to prevent material warping or fading.

Image 6.1: The durable engineered wood top surface, designed for daily use and easy cleaning.

7. Troubleshooting

If you encounter any issues during or after assembly, refer to the following common solutions:

• Table is wobbly: Ensure all screws are fully tightened. Adjust the leveling feet on the bottom of the legs until the table is stable.
• Parts do not align: Loosen all screws slightly, adjust the parts to align correctly, then re-tighten all screws firmly.
• Missing parts: Double-check the packaging. If parts are genuinely missing, contact HOOBRO customer support with your purchase details.
• Drawers do not slide smoothly: Ensure the fabric drawers are fully unfolded and the bottom board is correctly inserted. Check for any obstructions in the drawer slots.

8. Specifications

Image 8.1: Detailed dimensional drawing of the console table, including overall size and drawer dimensions.

9. Warranty and Support

HOOBRO is committed to providing quality products. For warranty information, missing parts, or any questions regarding your console table, please contact HOOBRO customer support through the retailer where the product was purchased. Please have your model number (BB71XG01) and purchase date ready when contacting support.