Bayer Design 62626AA Doll Bed with Built-in High Chair, Changing Table, and Mobile User Manual

1. Important Safety Information

Please read all safety warnings and instructions carefully before assembly and use. Keep this manual for future reference.

• Attention! Not suitable for children under 3 years.
• Presence of small elements that can be ingested. Choking hazard!
• For safety reasons, please remove all iron wires, plastic wires, rubber bands, tags, or other fastening materials from the toy before handing it over to the child.
• This product is not intended for use by a baby or child. It is designed for dolls only.

2. Product Components

Before assembly, ensure all components are present and undamaged. Refer to the packaging for a complete list of parts.

• Doll Bed Frame (various pieces)
• Fabric Bedding and Side Panels
• High Chair Attachment with Tray
• Changing Table Attachment
• Mobile Arm and Hanging Toys
• Storage Compartment Fabric
• 3 Hangers
• Blanket and Pillow

3. Setup and Assembly Instructions

Follow these steps to assemble your Bayer Design 62626AA Doll Bed. Adult supervision is recommended during assembly.

1. Assemble the Bed Frame: Carefully connect the frame pieces according to the diagrams provided in the original packaging. Ensure all connections are secure.
2. Attach Fabric Panels: Slide or fasten the fabric side panels and bedding onto the assembled frame. Ensure the mesh window is correctly positioned.
3. Install High Chair and Changing Table: Securely attach the high chair and changing table components to the designated areas on the bed frame. The high chair typically clips onto one side, and the changing table may fold out or attach to another section.
4. Mount the Mobile: Insert the mobile arm into its designated slot on the bed frame. Attach the hanging toys to the mobile arm.
5. Set up Storage: Attach the fabric storage compartment to the side of the bed, typically using Velcro fasteners. Place the three hangers inside.
6. Add Bedding: Place the included blanket and pillow inside the doll bed for comfort.

Figure 1: Fully assembled Bayer Design 62626AA Doll Bed, showing the bed, high chair, changing table, and mobile.

Figure 2: Side view of the doll bed, highlighting the mesh panel for visibility.

4. Operating Instructions

This multi-functional doll accessory offers various play possibilities:

• Doll Bed: Place your doll inside the bed for rest. The included blanket and pillow provide a cozy environment.
• High Chair: Position your doll in the built-in high chair for feeding time. The tray can be used for doll food or accessories.
• Changing Table: Utilize the designated area behind the high chair as a changing table for your doll.
• Mobile: The attached mobile with hanging toys can be rotated to entertain your doll.
• Storage Compartment: Use the side compartment with Velcro closure to store doll accessories. The three hangers are suitable for doll clothes.

Figure 3: A child demonstrating the use of the storage compartment on the doll bed.

Figure 4: A child engaging with the mobile and high chair features of the doll bed.

5. Maintenance and Care

Proper care will ensure the longevity of your doll bed.

• Cleaning Fabric Parts: The fabric components can be spot cleaned with a damp cloth and mild soap. Allow to air dry completely. Do not machine wash or tumble dry unless specified on a care label (not provided in product information).
• Cleaning Plastic/Metal Parts: Wipe down plastic and metal frame parts with a damp cloth. Avoid abrasive cleaners.
• Storage: When not in use, store the doll bed in a clean, dry place away from direct sunlight to prevent fading and material degradation.
• Regular Inspection: Periodically check all connections and components for wear or damage. Discontinue use if any part is broken or missing.

Figure 5: The included blanket and pillow for the doll bed, showing their design.

6. Troubleshooting

If you encounter any issues with your doll bed, refer to these common solutions:

• Problem: Parts do not fit together during assembly.
  Solution: Ensure you are using the correct parts for each step and that they are oriented correctly. Refer to the assembly diagrams. Do not force parts together.
• Problem: The doll bed feels unstable.
  Solution: Double-check all frame connections to ensure they are securely fastened. Make sure the bed is placed on a flat, stable surface.
• Problem: Mobile or attachments are loose.
  Solution: Verify that the mobile arm and other attachments are fully inserted and locked into their respective slots.

If problems persist, please contact customer support.

7. Specifications

8. Warranty and Support

For warranty information, please refer to the documentation included with your purchase or visit the official Bayer Design website. Specific warranty terms may vary by region and retailer.

If you require assistance, have questions about assembly, or need to report a missing/damaged part, please contact Bayer Design customer service. Contact details can typically be found on the manufacturer's website or product packaging.