Mecpow P150 Fume Extractor User Manual

1. Introduction

Thank you for choosing the Mecpow P150 Fume Extractor. This device is designed to effectively remove smoke, dust, and harmful gases from your workspace, providing a cleaner and safer environment. Featuring a 150W motor, 3-layer filtration system, and adjustable suction, the P150 is suitable for various applications including laser engraving, soldering, and other processes generating airborne contaminants.

Please read this manual thoroughly before operating the unit to ensure proper use, maintenance, and safety.

Figure 1: Mecpow P150 Fume Extractor in operation, demonstrating smoke extraction.

2. Safety Instructions

To prevent injury or damage, observe the following safety precautions:

• Always connect the unit to a grounded power outlet.
• Do not operate the unit in wet conditions or with wet hands.
• Ensure proper ventilation around the unit to prevent overheating.
• Keep children and pets away from the operating unit.
• Do not block the air inlet or outlet during operation.
• Turn off and unplug the unit before performing any maintenance or filter replacement.
• Use only genuine Mecpow replacement filters.
• If any unusual noise, smell, or smoke occurs, immediately turn off and unplug the unit.

3. Product Overview

3.1 Key Features

• 150W Powerful Suction: Equipped with a single-phase brushless motor, providing 258m³/h air volume.
• 3-Layer Filtration System: Includes a pre-filter, medium HEPA filter, and activated carbon filter for 99.97% purification efficiency.
• Integrated Sealed Design: Features unique metal buckles and a foam cover to prevent smoke leakage.
• Adjustable Fan Speed: Knob control for diverse air volumes to meet specific needs.
• Quiet Operation: Operates at approximately 50dB noise level.
• Smooth Mobility: Equipped with casters for easy movement and brakes for secure placement.
• Wide Compatibility: Suitable for Mecpow X3, X5, X4 series, and other enclosed laser engraving machines.

Figure 2: Mecpow P150 Fume Extractor connected to a laser engraver, illustrating its primary function and features.

3.2 Components

The Mecpow P150 Fume Extractor typically includes the following components:

• Main Fume Extractor Unit
• Flexible Exhaust Hose
• Power Cable
• Pre-filter (installed or separate)
• Medium HEPA Filter (installed or separate)
• Activated Carbon Filter (installed or separate)
• Casters (may require assembly)
• User Manual

Figure 3: Illustration of the Mecpow P150 Fume Extractor and its included accessories.

4. Setup

Follow these steps to set up your Mecpow P150 Fume Extractor:

1. Unpacking: Carefully remove all components from the packaging. Retain packaging for future transport or storage.
2. Caster Installation: If not pre-installed, attach the four casters to the bottom of the unit. Ensure they are securely fastened.
3. Filter Installation: The 3-layer filters (pre-filter, HEPA, activated carbon) are typically pre-installed. If not, refer to the maintenance section for correct filter placement. Ensure the foam seal is properly seated to prevent leaks.
4. Hose Connection: Connect one end of the flexible exhaust hose to the fume extractor's outlet port. Secure it with the provided clamp. Connect the other end to your laser engraver's exhaust port or enclosure.
5. Placement: Position the fume extractor on a stable, level surface near your workspace. Ensure there is adequate space around the unit for air circulation. Use the caster brakes to lock the unit in place.
6. Power Connection: Plug the power cable into the unit and then into a grounded electrical outlet.

Figure 4: Detail of the smooth casters with brakes for easy positioning and stability.

Figure 5: The integrated sealed design, featuring a foam seal and metal buckles, ensures no smoke leakage.

5. Operating Instructions

Operating the Mecpow P150 Fume Extractor is straightforward:

1. Power On: Turn the main power knob to the 'ON' position. The unit will start operating at a low speed.
2. Adjust Suction Power: Rotate the knob clockwise to increase the fan speed and suction power. Rotate counter-clockwise to decrease it. Adjust the speed according to the amount of smoke or fumes being generated.
3. Monitoring: Observe the effectiveness of the fume extraction. Ensure that smoke and fumes are being drawn into the hose and away from your workspace.
4. Power Off: After use, turn the main power knob to the 'OFF' position. Unplug the unit from the power outlet if it will not be used for an extended period.

Figure 6: The control panel with the adjustable knob for setting the desired suction power.

Figure 7: Visual representation of adjustable air volumes, from 10% to 100% suction.

6. Maintenance

Regular maintenance ensures optimal performance and longevity of your fume extractor.

6.1 Filter Replacement

The Mecpow P150 uses a 3-layer filtration system. Filters should be inspected regularly and replaced when suction power decreases significantly or when the filters appear visibly clogged.

Figure 8: The 3-stage filtration system, consisting of a pre-filter, HEPA filter, and activated carbon filter.

1. Power Off and Unplug: Always turn off the unit and unplug it from the power source before opening.
2. Access Filters: Locate the filter access panel, usually on the top or side of the unit. Open the panel according to the instructions on the unit or in the manual.
3. Remove Old Filters: Carefully remove the used filters, starting with the top layer (pre-filter), then the medium HEPA filter, and finally the activated carbon filter. Dispose of used filters responsibly according to local regulations.
4. Install New Filters: Insert new genuine Mecpow filters in the correct order: activated carbon filter at the bottom, followed by the medium HEPA filter, and then the pre-filter on top. Ensure they are seated correctly and the foam seal is intact.
5. Close Panel: Securely close the filter access panel.

6.2 Cleaning

• Wipe the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Periodically check the exhaust hose for blockages or damage.

7. Troubleshooting

If you encounter issues with your Mecpow P150 Fume Extractor, refer to the following table:

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Mecpow website. You can also contact the seller directly for assistance.

Visit the Mecpow Store: Mecpow Official Store