1. Introduction
The ESSGAER Magnetic Phone Vlog Selfie Monitor Screen is designed to enhance your mobile content creation by providing a real-time display of your phone's rear camera. This allows for precise framing and monitoring during selfies, vlogs, and live streams, utilizing the superior quality of your device's main camera. It features magnetic attachment, dual-band Wi-Fi for stable connection, and a Bluetooth remote for convenient control.
Image: The ESSGAER Magnetic Phone Vlog Selfie Monitor Screen magnetically attached to the back of a smartphone, displaying a live feed. A small Bluetooth remote is also visible.
2. Package Contents
Verify that all items are present in your package:
- 1x Phone Monitor Screen
- 1x Type-C Charging Cable
- 1x Instruction Manual
- 1x Bluetooth Remote
- 1x Magnet Disc (for non-MagSafe compatible devices)
Image: A visual representation of all items included in the product package.
3. Product Overview
The monitor features a compact and lightweight design. It includes multiple ports for power and audio, along with control buttons for screen adjustments.
Physical Features:
- Magnetic Back: For secure attachment to MagSafe-compatible phones or cases.
- Type-C Ports: For charging and video output.
- Control Buttons: For screen rotation, display ratio, and brightness adjustment.
- Power Switch: On/Off control for the monitor.
Image: A detailed view of the monitor's magnetic design, illustrating its attachment mechanism.
4. Setup
Follow these steps to set up your ESSGAER monitor:
- Attach the Monitor: If your phone or case is MagSafe compatible, simply align the monitor with the back of your phone for magnetic attachment. If not, use the provided magnet disc by adhering it to your phone case and then attaching the monitor.
- Power On: Locate the power switch on the monitor and slide it to the 'ON' position.
- Enable Screen Mirroring:
- iOS Devices: Go to your device's Control Center and enable 'Screen Mirroring'.
- Android Devices: Access Settings > Connected Devices > Connection Preferences > Cast.
- Connect to ESSGAER-Screen: Find 'ESSGAER-Screen' in the list of available devices and connect. For initial setup, you may need to enter the password '1234'.
- Open Camera App: Launch your preferred camera application (e.g., native camera app, Blackmagic Camera app) on your smartphone.
Image: Step-by-step visual guide for connecting the monitor to a smartphone using screen mirroring.
5. Operating Instructions
5.1. Real-Time Monitoring
The monitor provides a zero-delay live preview from your phone's rear camera, allowing you to adjust angles and framing for optimal shots during vlogging, live streaming, or selfies.
Image: A user demonstrating real-time monitoring with the ESSGAER screen, showing the phone's rear camera view.
5.2. Bluetooth Remote Control
Use the included Bluetooth remote control to capture photos or start/stop video recording from up to 30 feet away. This eliminates the need to touch your phone, ensuring stable footage and convenient operation.
Image: The monitor and phone setup on a tripod, illustrating the use of the Bluetooth remote for wireless control.
5.3. Screen Adjustments
- Brightness: The monitor offers 3 levels of brightness. Use the dedicated button to adjust the display to suit different ambient lighting conditions.
- Screen Rotation: Short press the rotation button to flip the screen 180 degrees.
- Display Ratio: Adjust between 1:1 mode and full-screen mode using the ratio adjustment button.
Image: The monitor displaying different brightness levels, from Level 1 to Level 3.
Image: Illustrations of screen rotation, display ratio adjustments, and the location of control buttons on the monitor.
6. Charging
The ESSGAER monitor is equipped with a Type-C charging port. It can be charged using various 5V/0.5A power sources, including:
- Wall charger
- Power bank
- Laptop
- Car charger
A Type-C cable is included in the package. The monitor features a 1800mAh battery capacity, providing approximately 4 hours of continuous use.
Image: The monitor connected to a charger, demonstrating its Type-C charging capability and long-lasting battery.
7. Compatibility
The ESSGAER monitor is compatible with:
- iOS 9.0 and later systems (including iPhone 12/13/14/15/16 series)
- Android 2.0 and later smartphones
- HarmonyOS 3.0 and later
- MagicOS 4.0 and later
Image: A visual guide to the compatible phone models and operating systems.
8. Important Notes
- The monitor does not support phone audio output directly.
- The monitor screen will disconnect when your iPhone's screen locks.
- Please check if your phone system supports screen mirroring/casting before purchasing.
- For optimal vertical video recording with certain advanced camera apps (e.g., Blackmagic Camera), ensure your phone's rotation lock is set to vertical mode to maintain correct aspect ratio on the monitor.
9. Specifications
| Feature | Detail |
|---|---|
| Package Dimensions | 4.92 x 3.9 x 1.34 inches |
| Item Weight | 7.4 ounces |
| ASIN | B0DXFFH5YS |
| Other Display Features | Wireless |
| Manufacturer | Shenzhen Huachuangzhibo Technology Co., LTD |
| Date First Available | February 17, 2025 |
10. Troubleshooting
- Screen Not Mirroring:
- Ensure the monitor is powered on.
- Verify Wi-Fi connection to 'ESSGAER-Screen' and correct password ('1234' for initial setup).
- Confirm screen mirroring/casting is enabled on your smartphone.
- Check phone compatibility with screen mirroring features.
- Incorrect Screen Orientation/Zoom:
- For vertical video recording, ensure your phone's rotation lock is set to vertical mode.
- Use the monitor's screen rotation and display ratio buttons to adjust the view.
- Monitor Disconnects:
- The monitor will disconnect if your iPhone's screen locks. Adjust your phone's auto-lock settings if continuous display is needed.
- Ensure stable Wi-Fi connection.
- External Microphone Issues:
- The monitor itself does not process audio. Ensure your external microphone is properly connected to your smartphone (e.g., via USB-C or adapter) and configured within your camera app.
11. Maintenance
- Keep the device clean using a soft, dry cloth.
- Avoid exposing the device to extreme temperatures or moisture.
- Store in a cool, dry place when not in use.
12. Warranty and Support
Specific warranty details are not provided in the product information. For support or warranty inquiries, please contact the manufacturer, Shenzhen Huachuangzhibo Technology Co., LTD, or your retailer.
