Kingsteam Professional Ozone Nano-Ionic Facial Steamer

Product Overview

The Kingsteam Professional Ozone Nano-Ionic Facial Steamer is designed for deep cleansing and hydrating the skin, suitable for both salon and home spa use. It features professional ozone technology for skin purification and nano-ionic hot mist that penetrates deeply to open pores, aiding in blackhead extraction and cleansing impurities. This steamer also enhances serum absorption and promotes facial blood circulation for a radiant complexion.

Figure 1: Kingsteam Professional Ozone Nano-Ionic Facial Steamer

Key Features:

• Pro Ozone Purification & Nano-Ionic Deep Infusion: Utilizes ozone technology for skin purification and nano-ionic hot mist for deeper penetration, pore cleansing, and enhanced serum absorption.
• Smart 60-Min Timer & Dual Steam Control: Features a 60-minute digital timer and adjustable High/Low steam levels to suit various skin types and needs.
• Ultimate Deep Hydration & Circulation Boost: Provides ultra-fine nano steam for deep hydration, dryness relief, fine line reduction, and improved blood circulation for a radiant glow.
• Salon-Grade Durability & Safe Construction: Constructed from premium, heat-resistant ABS material for long-term, stable, and safe performance.
• 360° Full Coverage Steam & Large Capacity: Equipped with a 360° rotatable nozzle for precise steam direction and a 400ml water tank for extended steaming sessions.

Setup Instructions

Follow these steps to assemble your Kingsteam Professional Ozone Nano-Ionic Facial Steamer:

1. Unpack all components and ensure all parts are present.
2. Assemble the base by inserting the four leg pieces into the central connector. Secure them firmly with the provided screw, tightening clockwise.
3. Insert the wheels firmly into the ends of the base legs.
4. Attach the main vertical pole to the assembled base, ensuring it is securely tightened.
5. Place the main steamer unit onto the top of the vertical pole, ensuring it clicks into place.
6. Insert the spray arm into the designated slot on the main steamer unit until it is securely fastened.

Initial Power Check:

After assembly, power on the unit to check the magnifying glass lamp and ensure basic functionality before adding water. Then, add tap water and check the heating function.

Operating Instructions

To use your Kingsteam Professional Ozone Nano-Ionic Facial Steamer, follow these steps:

1. Fill Water Tank: Ensure the steamer is unplugged. Fill the 400 ml water tank with distilled water up to the indicated mark. Do not overfill.
2. Power On: Plug the steamer into a suitable electrical outlet and turn it on using the power switch.
3. Adjust Settings: Adjust the steam level to either High or Low as needed, depending on your skin type and preference. Set the digital timer for your desired steaming duration, up to 60 minutes.
4. Positioning: Position your face approximately 10-12 inches from the 360° adjustable nozzle. The nozzle can be rotated to direct steam precisely to your face, neck, or décolletage.
5. Steaming Session: Steam your face for 5-10 minutes, then take a short break. You can repeat this for a total session of up to 20 minutes.
6. Aromatherapy (Optional): A small compartment is available for adding a cotton ball with essential oils to enhance your spa experience.
7. After Use: Always unplug the steamer after use and before attempting to empty or refill the water tank.

Figure 2: Control Panel and Aromatherapy Option

The nano-ionic mist is designed to penetrate 20 times deeper than regular steam, providing superior hydration and aiding in the removal of impurities. The ozone function helps to purify the skin during the steaming process.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your facial steamer.

• Water Tank: Always unplug the facial steamer before filling or emptying the water tank. After each use, empty any remaining water and keep the water cup dry to prevent mineral buildup and ensure safety.
• Cleaning: Regularly wipe down the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.
• Descaling: If you notice reduced steam output or mineral buildup, descale the unit according to the manufacturer's recommendations (typically using a diluted vinegar solution, followed by thorough rinsing).
• Storage: Store the steamer in a cool, dry place when not in use.

Troubleshooting

If you encounter issues with your Kingsteam Facial Steamer, refer to the following common problems and solutions:

• No Steam Output:
  • Ensure the unit is properly plugged in and the power switch is on.
  • Check if the water tank is filled to the appropriate level. The steamer requires water to generate steam.
  • Allow sufficient time for the unit to heat up (typically a few minutes).
  • Inspect the nozzle for any blockages and clean if necessary.
• Weak Steam Output:
  • Ensure the water tank is filled correctly.
  • Check for mineral buildup in the heating element or nozzle. Regular descaling is recommended.
  • Verify that the steam level setting is not on the lowest setting if you desire stronger steam.
• Unit Not Turning On:
  • Confirm the power cord is securely connected to both the unit and the wall outlet.
  • Check the circuit breaker or fuse for your electrical outlet.

If the problem persists after attempting these solutions, please contact Kingsteam customer support for further assistance.

Product Specifications

Warranty and Support

For warranty information or technical support, please refer to the documentation included with your product or visit the official Kingsteam store on Amazon.

Online Support: Visit the Kingsteam Store on Amazon

Always ensure to follow safety guidelines provided in the manual to prevent any damage or injury.