Important Safety Information
Please read and understand all instructions before assembling and using this product. Failure to follow these instructions may result in injury or damage.
- Keep all packaging materials away from children.
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Assemble the product on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly. Tighten all screws firmly once assembly is complete.
- This table is designed for indoor use only.
- Do not exceed the maximum weight capacity of 220 lbs (100 kg).
- Keep liquids away from the power outlets and LED light connections.
Package Contents
Verify that all components listed below are included in your package:
- 1 x Bar Table Top
- Metal Frame Components (legs, crossbars)
- Mesh Panels
- Built-in Power Strip with LED Lights
- Accessory Kit (screws, Allen wrench, adjustable feet)
- 1 x Instructions Manual
Assembly Instructions
Assembly typically takes approximately 15 minutes. It is recommended to have two people for easier assembly.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a soft, clean surface. Refer to the included parts list to identify each piece.
- Attach Legs to Tabletop: Secure the metal frame legs to the underside of the tabletop using the provided screws. Do not fully tighten yet.
- Install Crossbars: Connect the bottom metal crossbar between the leg frames. This crossbar also serves as a footrest. Secure with screws, but do not fully tighten.
- Insert Mesh Panels: Slide the mesh panels into their designated slots on the side frames.
- Connect Power Strip and LED Lights: The power strip and LED lights are pre-installed. Ensure all connections are secure.
- Final Tightening: Once all components are loosely assembled, place the table upright on a level surface. Systematically tighten all screws until secure.
- Adjust Feet: Adjust the leveling feet at the bottom of each leg to ensure the table is stable and does not wobble on uneven surfaces.
Operating Instructions
Using the Built-in Power Strip
The bar table is equipped with a convenient power strip to charge your devices.
- Power Connection: Plug the table's 6.6 ft (2 m) power cord into a standard wall outlet.
- AC Outlets: Use the two 125V/12A AC outlets for powering small appliances or charging larger devices.
- USB-A Ports: Use the two 5V/2A USB-A ports for charging smartphones, tablets, and other USB-powered devices.
Controlling the LED Lights
The integrated LED lights offer customizable ambiance.
- Power On/Off: Use the control button or remote (if included) to turn the LED lights on or off.
- Lighting Modes: Select from 2 distinct lighting modes.
- Brightness Levels: Adjust the light intensity with 7 brightness levels.
- Flashing Rates: Choose from 7 different flashing rates for dynamic lighting effects.
Utilizing Mesh Panels
The unique mesh panels on the sides provide additional functionality.
- Hanging Storage: Use S-hooks (not included) to hang small items such as headphones, keys, or decorative pieces on the mesh panels.
- Decorative Display: The mesh panels can also be used to display small decorative items or photos.
Maintenance
Proper care will extend the life and appearance of your bar table.
- Cleaning: Wipe the table surface and frame with a damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Spills: Clean up spills immediately to prevent staining, especially on the engineered wood surface.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- Power Strip Care: Ensure the power strip and its connections remain dry. Do not immerse in water.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly | Uneven floor; loose screws | Adjust the leveling feet at the bottom of the legs. Tighten all assembly screws. |
| LED lights not working | Power cord not plugged in; loose connection; faulty LED strip | Ensure the power cord is securely plugged into a wall outlet. Check all LED light connections. If problem persists, contact customer support. |
| Power outlets not working | Power cord not plugged in; circuit breaker tripped; faulty power strip | Verify the table's power cord is plugged in. Check your home's circuit breaker. Test with another device. If still not working, contact customer support. |
Specifications
| Feature | Detail |
|---|---|
| Brand | VASAGLE |
| Model Number | ULBT020B01V1 |
| Product Dimensions | 15.7"D x 47.2"W x 35.4"H (40 cm D x 120 cm W x 90 cm H) |
| Item Weight | 28.2 Pounds (12.8 kg) |
| Maximum Weight Capacity | 220 Pounds (100 kg) |
| Frame Material | Metal (Alloy Steel) |
| Top Material | Engineered Wood |
| Power Outlets | 2 x AC Outlets (125V/12A) |
| USB Ports | 2 x USB-A Ports (5V/2A) |
| Power Cord Length | 6.6 ft (2 m) |
| LED Light Features | 2 Modes, 7 Brightness Levels, 7 Flashing Rates |
| Color | Ebony Black + Matte Black |
| Recommended Use | Kitchen, Entryway |
| Care Instructions | Wipe with Damp Cloth |
Warranty and Support
VASAGLE products are designed for quality and durability. For specific warranty details, please refer to the documentation included with your purchase or visit the official VASAGLE website.
If you encounter any issues or have questions regarding your VASAGLE Bar Table, please contact our customer support team:
- Website: www.vasagle.com
- Email: support@vasagle.com
- Phone: (Refer to website for regional contact numbers)
