Introduction
Thank you for choosing the Enerwow 27000mAh Power Bank. This portable charger is designed to provide reliable and fast power for your mobile devices, featuring integrated cables and a clear LED display. Please read this manual carefully before use to ensure optimal performance and safety.
Product Features
- Integrated Cables: Equipped with built-in Type-C (input/output), iPhone (output), and USB-A (input) cables, eliminating the need for additional cables.
- Multi-Device Charging: Features 4 outputs and 3 inputs, allowing simultaneous charging of up to 4 devices.
- Advanced Safety: Integrated smart chip and precise temperature control prevent overheating, overcurrent, and overvoltage.
- High Capacity: 27000mAh capacity, capable of charging an iPhone 17 or Galaxy S22 up to 5 times.
- Fast Charging: Supports PD 30W and QC 3.0 USB-C fast charging, delivering 50% iPhone battery in 30 minutes.
- LED Display: Digital LED display shows precise power percentage.
Image: Enerwow 27000mAh Power Bank highlighting its integrated cables and LED display.
Image: Diagram illustrating the 4 output and 3 input ports available on the power bank, including the integrated Type-C, iPhone, and USB-A cables, as well as the USB-A and Type-C ports.
Image: A visual comparison demonstrating the convenience of the Enerwow Power Bank's integrated cables versus the clutter of external cables required by other chargers.
Setup and First Use
1. Charging the Power Bank
Before initial use, fully charge your power bank. The LED display will show the charging progress.
- Using the Integrated USB-A Cable: Connect the integrated USB-A cable to a USB wall adapter (not included) or a computer's USB port.
- Using the Integrated Type-C Cable: Connect the integrated Type-C cable to a Type-C wall adapter (not included).
- Using the Type-C Port: Connect a Type-C cable (not included) to the power bank's Type-C input port and then to a Type-C wall adapter.
The LED display will show "100%" when fully charged.
Image: Illustration of three ways to recharge the power bank: using the integrated USB-A cable, the integrated Type-C cable, or an external Type-C cable with the dedicated Type-C port. Note: Adapter and charging cable are not included.
2. Checking Battery Level
Press the power button once to activate the LED display, which will show the current battery percentage.
Image: The power bank's digital LED display showing a precise battery percentage, from 0 to 100.
Operating Instructions
Charging Your Devices
The power bank allows you to charge up to four devices simultaneously.
- Using Integrated Cables:
- For iPhone devices, use the integrated iPhone output cable.
- For USB-C devices, use the integrated Type-C output cable.
- For devices requiring a USB-A input, use the integrated USB-A cable (note: this is primarily for recharging the power bank itself, but can also serve as an output if the device supports it).
- Using External Ports:
- Connect your device's charging cable to the USB-A output port or the Type-C output port on the power bank.
Once connected, the power bank will automatically begin charging your device(s). The LED display will remain active during charging.
Image: The power bank simultaneously charging an iPhone, an iPad, and wireless earbuds, demonstrating its multi-device charging capability.
Image: The power bank displayed alongside various compatible devices like smartphones, tablets, AirPods, and a Nintendo Switch, emphasizing its 27000mAh large capacity and broad applicability.
Image: The power bank being used in multiple scenarios, including travel, outdoor activities, and work, highlighting its versatility and portability.
Safety Information
The Enerwow Power Bank incorporates multiple safety features to protect both the device and your connected electronics.
- Overvoltage Protection
- Overcurrent Protection
- Short-Circuit Protection
- Overcharge Protection
- Over-discharge Protection
- Temperature Control
- Electromagnetic Field Protection
Image: An exploded view of the power bank revealing its internal smart chip system, surrounded by icons representing various protection features like overvoltage, overcharge, recovery, high temperature, short-circuit, and overpower protection.
Maintenance
- Keep the power bank away from water and high humidity.
- Avoid exposing the device to extreme temperatures (hot or cold).
- Do not disassemble, puncture, or modify the power bank.
- Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Store in a cool, dry place when not in use for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Power bank not charging | Cable not connected properly; faulty cable/adapter; power bank fully charged. | Ensure all connections are secure. Try a different cable or wall adapter. Check LED display for "100%". |
| Device not charging from power bank | Power bank battery low; device cable not connected properly; device incompatible; power bank in standby. | Check power bank battery level. Ensure device cable is securely connected. Press power button to activate. Verify device compatibility. |
| Slow charging | Using a non-fast charging port/cable; multiple devices charging simultaneously. | Ensure you are using a PD 30W or QC 3.0 compatible port/cable. Charging multiple devices may reduce individual charging speed. |
| LED display not working | Power bank is off; battery completely depleted. | Press the power button. Charge the power bank. |
Specifications
| Brand | Enerwow |
| Model | 27000mAh Power Bank PD 30W |
| Capacity | 27000mAh |
| Battery Type | Lithium-polymer |
| Input (USB-A Integrated) | 5V/2A, 9V/2A, 12V/1.5A (QC 3.0) |
| Input (Type-C Integrated & Port) | 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A (PD 30W) |
| Output (iPhone Integrated) | 5V/2.4A |
| Output (Type-C Integrated & Port) | 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A (PD 30W) |
| Output (USB-A Port) | 5V/3A, 9V/2A, 12V/1.5A (QC 3.0) |
| Number of Ports | 4 (2 integrated cables, 2 external ports) |
| Dimensions (L x W x H) | 14 x 6 x 2 cm |
| Weight | 460 g |
| Compatible Devices | Smartphones, Tablets, and other USB-powered devices |
Warranty and Support
Enerwow products are designed for reliability and performance. For warranty information and customer support, please refer to the contact details provided with your purchase or visit the official Enerwow website.
If you encounter any issues not covered in the troubleshooting section, please contact our customer service team for assistance.
- Online Support: Visit the Enerwow Store on Amazon
- Email Support: Refer to your product packaging or purchase invoice for specific contact email.