Important Safety Information
Please read and understand all instructions before assembly and use. Keep this manual for future reference.
- Assembly is required. Ensure all parts are correctly installed to prevent potential safety risks.
- The faux marble material, if broken into small pieces, may present a choking hazard. Keep small children away from damaged parts.
- Do not stand on the table or chairs.
- Do not exceed the weight capacity of the table or chairs.
- Periodically check all bolts and screws to ensure they are tight.
Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer service.
- 1 x Dining Table (Faux Marble Top, Metal Frame)
- 4 x Upholstered Dining Chairs (Velvet Fabric, Metal Frame)
- Assembly Hardware (screws, bolts, Allen wrench)
- Instruction Manual
Assembly Instructions
Assembly is straightforward and can be completed by following the included instructions. It is recommended to assemble the furniture on a soft, clean surface to prevent scratches.
Step 1: Assemble the Dining Table
Attach the table legs to the tabletop using the provided hardware. Ensure all connections are secure but do not overtighten until all parts are aligned.
Image: Diagram illustrating the attachment of table legs to the faux marble tabletop using screws and an Allen wrench.
Step 2: Assemble the Dining Chairs
Connect the chair backrests to the seats, then attach the chair legs. Ensure all screws are tightened evenly. The chair legs include floor protectors.
Image: Detailed diagram for assembling a dining chair, showing how to connect the seat, back, and legs.
Image: Close-up view of a chair leg, highlighting the integrated floor protector designed to prevent scratches on flooring.
Tip: Wearing gloves during assembly can prevent discomfort from handling small tools.
Usage and Features
Space-Saving Design
The dining chairs are designed to fit neatly under the dining table when not in use, optimizing space in smaller living areas.
Image: Illustration demonstrating how the dining chairs can be tucked under the table to save space.
Ergonomic Comfort
The chairs feature high-density sponge cushions and breathable velvet upholstery, with an ergonomic 100° tilt angle and high backrest for improved support and comfort during extended use.
Image: A hand pressing down on the velvet chair cushion, illustrating its soft, high-density sponge padding.
Maintenance and Care
- Faux Marble Tabletop: The tabletop has a smooth, easy-to-clean surface. Wipe spills immediately with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Velvet Chairs: For general cleaning, gently vacuum the velvet upholstery. For spills, blot immediately with a clean, dry cloth. Do not rub. For stubborn stains, consult a professional upholstery cleaner.
- Metal Frame: Wipe the metal frames with a soft, dry cloth. Avoid moisture and harsh cleaning agents to prevent rust or damage to the finish.
- General Care: Avoid placing hot items directly on the tabletop; use coasters or placemats. Keep furniture away from direct sunlight and heat sources to prevent fading or material degradation.
Image: Water droplets on the faux marble tabletop, illustrating its waterproof and easy-to-clean properties.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Wobbly Table/Chairs | Loose screws or uneven assembly. | Check and tighten all screws and bolts. Ensure the furniture is on a level surface. |
| Difficulty Assembling | Incorrect part orientation or missing hardware. | Review the assembly instructions carefully. Verify all parts are correctly oriented. Contact customer service if hardware is missing. |
| Scratches on Floor | Missing or damaged floor protectors. | Ensure all chair and table legs have their protective caps. Replace any damaged protectors. |
Specifications
| Brand: | AWQM |
| Model Number: | Dining Table Set05 |
| Material: | Faux Marble, Metal, Velvet |
| Color: | White & Grey |
| Product Dimensions (Table): | 47.25 x 27.56 x 30.71 inches (L x W x H) |
| Item Weight: | 65.2 pounds |
| Assembly Required: | Yes |
Image: Detailed product dimensions for both the dining table and a single chair.
Customer Support
For any questions, missing parts, or issues encountered during assembly or use, please contact our customer service center. We are committed to providing assistance and ensuring your satisfaction.
Contact information may be found on your purchase receipt or the product packaging.
